What type of speaker and what type of mixer? With this speaker you can use a 1/4” breakout cable going from master L/R into the 2/3 input. There are some other options as well
@ToastedGhost
4 ай бұрын
Great video…. Bought this mixer but I am having a noise issue when using the mixer with usb connection to my ipad… Please do you have any tips that could help me? Many thanks
@SBEventPro
4 ай бұрын
There are a few things to troubleshoot for something like that. Is the ipad connected to a charger? Is the charger plug grounded? Is the mixer grounded? What type of noise are you getting?
@ToastedGhost
4 ай бұрын
@@SBEventPro Thanks for the reply. Yes the ipad is connected to a charger. I am in the UK so all plugs have an Earth but is there some special thing I need to do to ground my applicances? The sound is a soft but hearable white noise. What can I do to ground the mixer? Many thanks for all your help
@SBEventPro
4 ай бұрын
@@ToastedGhost I would first try to isolate the problem by having only the ipad (not connected to charger) going to the mixer, and headphones on the mixer to listen to it. If you still get the noise, try to move to a different circuit for your mains, as you could be picking up interference from something else on the same circuit. We usually work our way down the circuit to see if it's a speaker issue, a mixer issue, or an ipad issue.
@Urbanmpktapes
7 ай бұрын
Can I connect a passive speaker to an active speaker? without any amp or mixer??
@SBEventPro
7 ай бұрын
You will need to have an amp or powered mixer to use a passive speaker.
@Urbanmpktapes
7 ай бұрын
@@SBEventPro thanks for making things clear 🙏
@nemiesis
8 ай бұрын
I already know all of this but your super clear and basic explanation was super satisfying to watch :)
@SBEventPro
8 ай бұрын
Thank you so much. We will make more to help as many people as we can.
@jedblogsofficial
11 ай бұрын
How about xenyx Q502?
@laika25
Жыл бұрын
So clear. Thanks
@djfusion.london
Жыл бұрын
Thank you 😊
@kickmeijer2396
2 жыл бұрын
exactly what i needed, thank you!!
@SBEventPro
2 жыл бұрын
Glad to help Kick!
@selectorerwin1don12
2 жыл бұрын
didnt u suppose to turn ur speaker volume down first🤣🤣🤣 u need to correct that step
@SBEventPro
2 жыл бұрын
Good eye there Erwin, thanks for pointing that out.
@selectorerwin1don12
2 жыл бұрын
@@SBEventPro its ok bro
@trini-xrp1656
2 жыл бұрын
Best an easiest explanation, thanks .
@desza72
2 жыл бұрын
Thanks
@ABD4VIDS
2 жыл бұрын
Excellent demonstration of this unit!! Great Job!
@SBEventPro
2 жыл бұрын
Glad to help Andy!
@junealmuete6184
2 жыл бұрын
Thank you..slowly but surely explanation..
@SBEventPro
2 жыл бұрын
Thank you June. We like to keep things as simple as possible.
@Doctor_Vinyl
2 жыл бұрын
I wonder if you can leave the mic switch on while djing? I notice its louder. My mixer is connected to input 1 (xlr) But when the line switch is on, the sound of the speaker is a little tight. Is it ok to leave the mic switch on , and not worry for the speaker to blow up?.
@ahmadabumadiorganist.ahmadmadi
2 жыл бұрын
Power blugg with connection to extinction show me thanks bro i wanna use to my instrument
@SBEventPro
2 жыл бұрын
Hello Ahmad. We would like to help, what are you trying to connect exactly?
@ahmadabumadiorganist.ahmadmadi
2 жыл бұрын
@@SBEventPro they have cable extinction for mixer
@MusicManC
2 жыл бұрын
My question is what kind of led stand is that on your right? I need 4 of them.
@SBEventPro
2 жыл бұрын
Hey @MusicManC, that's a 1.5 Meter Vertical truss. Global Truss F34 SQ-1111 with a battery powered LED working as a truss warmer (light).
@tigerlilly6895
2 жыл бұрын
Thank you, so many just keep talking and don't show the actual plug ins, so thanks for being so detailed. The only thing you didn't cover was a microphone setup...
@calnaum9571
3 жыл бұрын
But there is no other speaker? Why is you are just using one speaker? How do you get the left and right just on 1 speaker?
@chapintinmarceau1404
3 жыл бұрын
That’s the way to teach... and the way i have been looking for... thank you , thank you so much... could yo please make a video how to connect a turntable to mixer and pc... thank you...
@mahmoudabozaid2909
3 жыл бұрын
The best one who can explane
@contrafighter_1983
3 жыл бұрын
Thank you for tutorial, helped 100%!
@tonybrooks9034
3 жыл бұрын
could we facetime i need help hooking up two mixers correctly pleaseeee
@hyunwhite6935
3 жыл бұрын
The best instruction in KZitem!
@rblxmac
3 жыл бұрын
Thanks, i will have a speaker in the future and this might help! thanks
@polisman7681
3 жыл бұрын
Thanks for help. I also want to know if i can connect a active subwoofer to this mixer?
@schhim82
2 жыл бұрын
Yes just daisy chain to your top speaker or use one of the other outputs. I’ve used the ctrl booth output.
@polisman7681
2 жыл бұрын
@@schhim82 Thanks! Quite late but i cant blame you.
@EucaAgui224
3 жыл бұрын
I love the set up instructions very detailed now i have questions what do I need if i am using my TV i have the same Mixer 802 and speaker JBL i am using my TV as my Karaoke my TV has Optical and HDMI audio what do i need please help
@RjBenjamin353
4 жыл бұрын
👍👍👍
@WarrioRAbsolutE
4 жыл бұрын
Very nice sir but I have a question. Since all of this mixer's outputs are unbalanced shouldn't you connect them to the monitor via unbalanced cables? The cables you use now are balanced. This is so confusing for me. Your answer would help a lot! Thanks!
@dennizgester2351
4 жыл бұрын
You can connect a mixer to a speaker with a balanced cable if you want
@WarrioRAbsolutE
4 жыл бұрын
@@dennizgester2351 It's the same thing whether you connect balanced or unbalanced cables if the output is unbalanced?
@dennizgester2351
3 жыл бұрын
@@WarrioRAbsolutE Yes, if the Tip and Ring is Bridged
@schipbreukeling3
4 жыл бұрын
This is so basic and clear explained, you can not go wrong with this one.
@AdrianDixonFitnessDixon
4 жыл бұрын
Thank you for your help 🙏 Question - How would I then connect this to my laptop to play in zoom 🏎 for fitness ? I have the USB mixer. I have a headmic as well and it’s all very confusing 😱
@SBEventPro
4 жыл бұрын
I know what you mean Adrian! It can be confusing, especially with the way that Zoom processes audio. The critical thing is to set Zoom to NOT do any audio processing, and don't expect to hear your mic in the headset. We have done a few setups, and audio is the critical factor.
@AdrianDixonFitnessDixon
4 жыл бұрын
@@SBEventPro Thank you for your help ! I spent a few hours using your vid to set up mic and sound and then did a test with friends on zoom
@SBEventPro
4 жыл бұрын
@@AdrianDixonFitnessDixon Glad we could help! We will be putting a primer together on getting good sound from online meetings.
@AdrianDixonFitnessDixon
4 жыл бұрын
@@SBEventPro thank you :)
@matthewjenkins5313
4 жыл бұрын
Finally someone who knows what he's doing !!!! 👍😀
@Pastor_SANTHOSH
4 жыл бұрын
Very good explanation...thq u
@justfun4life81
4 жыл бұрын
Great video, can you do a video adding a home power sub to a pa set up, if possible.
@shakabrown
4 жыл бұрын
Sure we can do that. We do it all the time. Thanks for watching!
@harerampandey1412
4 жыл бұрын
ये दिल्ली नोएडा मे कहा से खरीदा जा सकता है कृपया बताये 9990747144 फोन नम्बर पर
@shakabrown
4 жыл бұрын
देखने के लिए धन्यवाद। हम भारत के पुनर्विक्रेता नहीं हैं। मुझे खेद है कि हम इसमें आपकी मदद नहीं कर सकते।
@clos6933
4 жыл бұрын
great video but I always turn my speakers down to 0 before I turn them off for the next gig
@shakabrown
4 жыл бұрын
That's good practice as well. We have different teams breakdown, and some of them aren't as technically savvy. So we stress turning it off before anything else, as they might mix up turnign the speaker down with turning the mixer down. We work on keeping it fool-proof. Thanks for watching!
@pitoytoy19
4 жыл бұрын
Excellent! Straight to the point! Excelente muy bueno!! Al grano!!
@SBEventPro
4 жыл бұрын
Muchisimos Gracias! Vamos a poner mas videos pronto.
@akanovels
4 жыл бұрын
Great video
@deodathbirbal
4 жыл бұрын
How do you connect the same mixer with two jbl eon 518s reason is i keep getting more bass from the sub when the left and right goes into one sub from the minute i send left to one sub and right to another sub it's less bass why is this am i doing something wrong???
@Sperminski
4 жыл бұрын
Quick and simple, good video for newbz.
@aliarab4379
4 жыл бұрын
Thnk you the tutorial guys
@LeRoiSimmonds
5 жыл бұрын
Very informative. Thanks.
@williamgressman2958
5 жыл бұрын
lame as hell bruh
@1Capnjazz
5 жыл бұрын
I hate the power supply on these mixers.
@fehmisolmaz805
4 жыл бұрын
Me too!
@cruzanassassin
5 жыл бұрын
My light isn't blue.. It's orange... Not getting sound... Something is wrong with mine
@dennizgester2351
3 жыл бұрын
If you have get the new version of the Xenyx 802 so is it normal that the light is orange beacuse it is a orange LED
@samuraisammy1422
5 жыл бұрын
Hello sir... im quite confused... is mixer different than amplifier? I have 3 devices to connect with. Those are phone, speaker and microphone and the source would only be the mixer. are they enough for karaoke? Or do i need an amplifier? Or is that mixer already an amplifier?
@ericpeacock100
3 жыл бұрын
Those are powered speakers. The amplifier is in the speaker.
@samxlovegod
5 жыл бұрын
Right to the point very simple great video will be sharing thank you much success👍👍🇺🇸
@boxingday11
5 жыл бұрын
Thanks, well instructed and easy to follow.
@guillermomrltz
5 жыл бұрын
Thanks!!!
@mornebosman8259
5 жыл бұрын
Where would you connect a active subwoofer on the mixer
@mattheww3116
5 жыл бұрын
As this is only a basic mixer there are no dedicated output for a subwoofer. You could however use the control room output to send an additional output to a subwoofer, providing your active subwoofer has a built in crossover ( to ignore high frequencies )
@TheHxpro
5 жыл бұрын
@@mattheww3116 You could take a feed from the output of the JBL speaker to the subwoofer. Easy.
@mattheww3116
5 жыл бұрын
@@TheHxpro Only if it has a subwoofer out. Not all active speakers do.
@TheHxpro
5 жыл бұрын
@@mattheww3116 You will find that any active speaker with a line level out will be fine to connect an active sub to. All active subs have an inbuilt crossover that will filter out all the top end from the active speaker. That is what active subs are designed to do. I connect my active subs to my QSC K 10's like that and it works. It will work with any of todays active speakers. The most common way to connect is direct via the mixer but the 802 does not allow that unless you use control; room out. Not ideal though as you will need to change the volume of the control room every time you change the volume of the channel you are playing on the mixer.. I work with a range of equipment including QSC, Mackie, JBL and Behringer. Anyway, the JBL EON in the video has a line level out and connecting a sub to it is perfectly OK. Enjoy !
@rutzelfutzel2956
5 жыл бұрын
Very good and clear presentation. Thank you. Greetings from Germany :-)...
@SBEventPro
4 жыл бұрын
Thank you very much. Germany produces some of the finest hardware. We will post more videos soon.
Пікірлер