Thank you so much Jeff! Did this today on my 2012 Frontier and it worked perfectly. This has been an annoyance for over 10 years.
@jeffmcilveen2796
Ай бұрын
Your welcome. Mines still working as well. That's like 3 years now. I guess I did a good job cleaning it up first. I figured it would last maybe a year.
@ianmartin7312
Ай бұрын
Thank you. This no-cost repair fixed a really dangerous problem with my 2010 Qashqai Tekna. I could not cancel my left indicator at all, which upset a lot of other motorists! 🙂 Total repair time was about 15 minutes, plus the waiting time for the epoxy to set hard. A second-hand indicator switch units are available for about £60, but you never know, you could buy one which causes the same problem!
@robertpierce9385
3 ай бұрын
Waste of money. Instead why doesn't everyone use the money to fo proper maintenance on your car. Like change the oil regularly instead of spending 100$+ on bs snake oil. Gtfoh
@dalton-jon-f5791
24 күн бұрын
Have you tried it?
@davidrodgers2314
2 күн бұрын
It’s funny the people that knock the stuff or the people that can’t afford it because they don’t even have a vehicle to use it on there’s thousands and thousands upon thousands of great reviews with this stuff I’ve used it. It’s awesome. You’re just a 🤡
@netmatt12-oq6xy
4 ай бұрын
Very helpful, I drilled a little hole with a small screw to extend it, and fixed my new Xterra stalk, thanks!
@jeffmcilveen2796
4 ай бұрын
Excellent, whatever works is good!!
@LenzShankz
5 ай бұрын
thanks
@jeffmcilveen2796
5 ай бұрын
Good stuff.
@giovanniguerrero8951
6 ай бұрын
Wow this actually worked.. after days of trying to find the flasher relay (which doesnt exist on my 2004 nissan altima) to realizing this component is what controls the turn signals.. and now seeing that the issue was mechanical (this) with your video. Thank you so much!!
@jeffmcilveen2796
6 ай бұрын
Good Stuff !!
@joeygoncalves7085
10 ай бұрын
Thanks! I just a little bit of super glue and about 1mm tick plastic glued to the tip of the yelow switch. Been working doe a couple of weeks. Nice!
@jeffmcilveen2796
10 ай бұрын
Awesome, mine is still working to after 2.5 years.
@eddt7764
11 ай бұрын
Hello .. is this nub that looks little short is part of the clockspring or part of the steering wheel .. ??
@jeffmcilveen2796
11 ай бұрын
Its just the nub off the switch that comes off.
@spacepotatogaming
9 ай бұрын
Why are you saying hello as if he didn't perfectly explain the issue like what did you even whatch the video????
@toyouall
Жыл бұрын
Been using Tribotex ever since it first came out (back then it was WAY cheaper!) All I can tell you is that it works, and I have been a happy customer ever since.
@lmc6516
Жыл бұрын
175+k on my 16 Hyundai Elantra w/ tranny & engine treatments, no problems and 38.5 mpg. around town. Run it in my truck and lawn equipment too. As a power plant engineer for 40 + years I know the value of proper maintenance and good lubrication, Its money well spent. The life of equipment and it's efficiency shows how effective that is , often overcoming mechanical deficiencies.
@davidrodgers2314
2 күн бұрын
Did you put it in your transmission with it having problems or did you use it as a deterrent and put it in a good transmission?
@lmc6516
2 күн бұрын
@@davidrodgers2314 Deterrent, so far so good 188k now.
@shepatown
Жыл бұрын
My 03 Honda CRV has the engine oil treatment. Car runs like new. Been using it for a few years now. I've ordered the transmission stuff recently.
@jokerfleckcast3196
Жыл бұрын
Just changed a clock spring and now have exact same issue. Only fails to self cancel on the left side.
@eddt7764
11 ай бұрын
were you able to fix it using this method in the video.. Were the tabs part of the clockspring or part of steering wheel ?
@jokerfleckcast3196
11 ай бұрын
@@eddt7764 yes it works.
@jeffmcilveen2796
10 ай бұрын
yup@@eddt7764
@marylamb6063
Жыл бұрын
Thank you. What epoxy do you recommend?
@jeffmcilveen2796
5 ай бұрын
jb weld
@hillmakeitbetter
Жыл бұрын
Oh My Gosh the BEEEP! Cant watch. But thanks, watching on mute now.
@jeffmcilveen2796
Жыл бұрын
My heavy breathing drove you mad, don't forget to sand your nib before releasing the epoxy. I used jb weld
@hillmakeitbetter
Жыл бұрын
@@jeffmcilveen2796 honestly didn't notice breathing. had earbuds on that super enhanced the ignition beep. Oh well. I have an 03 X that's different, but ya got me lookin in the right spot.
@jeffmcilveen2796
Жыл бұрын
@@hillmakeitbetter Let me know if it fixes it
@hillmakeitbetter
Жыл бұрын
@@jeffmcilveen2796 My dab of JB Weld came off while filling it down. Even after 2 cure days. 😓 I superglued it back on. Then it must of been too big as it broke off during testing. It seems like it might have worked if it had a good bond.
@jeffmcilveen2796
Жыл бұрын
I cleaned my nubby first and filled it before I put on the jb. I failed the first time so get that nubby cleaned and filed first@@hillmakeitbetter
@jeffmcilveen2796
Жыл бұрын
And it's still working 2 years later!!!
@jeffmcilveen2796
Жыл бұрын
I cleaned my nubby first and filled it before I put on the jb. I failed the first time so get that nubby cleaned and filed first
@jxsguitar
7 жыл бұрын
Life realty is a shitshow. love it
@jeffmcilveen
5 жыл бұрын
Did that post as Trumpetier or Mcilveen..oh shit...edit time..
Пікірлер