mine just blinks yellow quickly how can i fix :(, nevermind user error i had a capacitor in the wrong hole of the breadboard (this my first project with anything like this so i had trouble figuring it out) thanks bro good video will be testing the ffb soon the inputs work though already
@jeanfrarugama3423
2 ай бұрын
Does this work for windows Xp? I have an older computer I play my games on which happens to not have a game port.
@grinsekotze
3 ай бұрын
force feedback in windows 11? it really works! thank you very much for introducing this great project.
@Hermesaile
4 ай бұрын
Hi Conrado! I tried to made one and windows doesnt recognize the Joystick. I'm working with windows 11, and i bought the Teensy 2.0 from Aliexpress, maybe i need to boot the board first with a certain code? Thanks.
@luzten
5 ай бұрын
Alo Conrado, muito obrigado por este gran video. I have one question, do you think this adaptation will work on Linux as well? I am planning in buying the joystick to play with on X-Plane 12 and MSFS 2020 with proton. Thank you once more!
@gregoryzloch9106
5 ай бұрын
The schematic shows 4 potentiometers labelled Rx, Ry, Rp1 and Rp2. You didn’t use those in your circuit and there was no mention about them either. Do they really need to be in there? If not, then what connections need to be made to pins PF0, PF1, PF4 and PF5? Thank you
@gregoryzloch9106
5 ай бұрын
Great job man! Thanks for this. I can’t wait to build this to finally use my FFB pro again. I’ll never give that stick up. It’s the best.
@zeart2939
Жыл бұрын
Dthanks for the video, does it work with the streering wheel and pedals?
@MrGiulianoferrari
Жыл бұрын
Cara parabéns !! !que aula !!! voce não faz um desses e vende ? Abraço !!
@conradovergueiro
Жыл бұрын
Obrigado amigo! Você não é a primeira pessoa a pedir. Eu realmente gostaria de fazer mas atualmente não tenho mais tempo disponível. Com o Teensy em mãos é bem fácil, se conhecer alguém que mexe com eletrônica.
@joebiggs4387
Жыл бұрын
I should’ve went to college. Damn, I won’t be using mine anytime soon.
@AlanBispo1974
Жыл бұрын
Fala Conrado, beleza? Cara, video muito foda mas eu não saco absolutamente nada de eletrônica, e a minha pergunta é: você faria um desses pra mim e quanto custaria? Eu tenho um microsoft sidewinder force feedback pro guardado na caixa e a tristeza de não poder usar mais é grande! Esse teu video me deixou muito animado!
@conradovergueiro
Жыл бұрын
Bom dia Alan tudo bem? Poxa eu faria para vender super contente mas infelizmente não estou conseguindo tempo para fazer devido a trabalho e família. Aqui nos comentários já vi alguns brasileiros que fizeram, um inclusive fez uns 3 se não me engano. Ás vezes eles podem te ajudar! Realmente, eu comprei esse joystick usado pois era meu sonho de infância e ele ainda é muito bom, não perde nada pra um novo, até porque é difícil um novo com force feedback. Não se livra dele não que tem jeito!
@igorlatgamingchannel3237
Жыл бұрын
Wonderfull instruction which gives me the option to alternativly use my good old MS Sidewinder FFB Pro gameport joysticks or my MS Sidewinder FFB steering wheel on my main-pc. The video-tutorial is fantastic. I built 4 adapters. Each of them was working for a short time. But now 3 of my 4 adapters don't work. I bent the two 2k2 resistors and produced a short circuit on the teensy2.0 board. It worked fine for a short time. The 4th adapter I built works fine with my main-pc (win10). I'm so happy that my main-pc is working perfect with the LUFA-joystick-emulation. In combination with x360ce the adapter allows me to play gta online simultanly with keyboard an mouse, steering wheel and pedals and the MS Sidewinder FF Pro for helicopters and planes. The steering wheel is a MS SW FFB with usb-port Unfortuneatly it seems to be unpossible to buy the resistors with a 10% tolerance. Only 1 and 5 % resistors are available when I start a Google shopping search. I think that I need 2 x 2,2 kohm resistors red red black brown silver tolerance 10% and 1 x 220 ohm resistor red red black black silver tolerance 10% for each adapter. Can You write me where to buy them, please? Great work, Sir. Thank You very much. Sincerley Yours
@SP-sb6qp
Жыл бұрын
Hi, I tried your handsome project using a Microsoft Sidewinder wheel, force feedback, but it didn't work. Have you some tips? Thank you
@seuratguy
Жыл бұрын
Can you recommend a place to get all the parts?
@javierpalenciarueda5819
Жыл бұрын
good afternoon, I followed step by step the creation of connections, values of the resistors and components, however I can't get the FFB to work. I don't know if the HEX works to date, if the teensy 2.0 is valid. Someone currently has the joystick operational that can tell me what elements it is using. Thank you!
@javierpalenciarueda5819
Жыл бұрын
Hello!!!! Works with FS2020?
@MrTiti
Жыл бұрын
very nice, because i think today we can simply play those games, my pc is not modern, but my CPU uses little power and i can play all i ever wanted, with super grafics, and a great 27" screen with 140% RGB gamut
@Weizboy
Жыл бұрын
Thank you! I want to make this like yesterday, why don’t you have lots of this? You make something so amazing and I don’t know where to go and buy the modules and stuff.
@timoalbert8819
2 жыл бұрын
You are a hero! I played Star Wars Episode 1 Racer with this Joystick until my hand hurt, because the force feedback of this monster was SO STRONG! Even had to losen my grip to disable feedback (IR-sensor in the handle) sometimes. Even NFS was so much fun with it! I was shocked when Microsoft decided to kill the game port with Windows 7 and my beloved Joystick became obsolete. It still has to be at my parents house somewhere and I'd definitely like to try out your solution! Can you say anything about the input delay? And does the IR-sensor still work? I re-bought Star Wars Episode 1 Racer years ago because you can't install the original (installer is a 16bit programm that doesn't run on a newer OS). Was always disapponted about playing this game with an xbox controller and right now i'm kind of hyped playing it again!
@klowdzmcvee9133
2 жыл бұрын
Thanks man!
@julianjackson6824
2 жыл бұрын
Joy oh Joy, oh Frabjous day! Thank you Conrado, the contraption is working fine and my lovely old joystick looks to be back on line. IDIOT BEGINNER'S MISTAKE: You need to solder *all* the pins on the Teensy or the joystick won't work. Because I'm bad at soldering, I only did every other one, and nothing happened. On Win 10 the joystick comes up in Settings>Bluetooth and other devices; in Device Manager it's HID compliant game controller. Enjoy!
@x1101126
2 жыл бұрын
Will the force feedback function supported by other game like DCS world?
@3d_workbench688
2 жыл бұрын
Will this work for Suncom F-15E Talon joystick guys?
@lucianodarriba
2 жыл бұрын
You are a monster, pal!!!!!! This solution is the dream of every Sidewinder lover!!!! I don't how you don't have 100.000 subscriptions!!! Awesome!!!!! Thanks!!!
@giovannisammarco9931
2 жыл бұрын
hello nice project how can i buy it?
@GenericJohnDoe
2 жыл бұрын
Will this work even under Win10 and old but refurbished games from GoG like Descent Freespace 1 and 2, x-Wing Alliance and etc.?
@z80svtrx
2 жыл бұрын
Não entendo uma coisa,existe o hex e source para AVR,mas qual placa uso? A do vídeo não é um ARM7?
@017524062
2 жыл бұрын
excellent thanks.
@vcostainternet
2 жыл бұрын
again! just came here to say thanks! I made a converter and it worked! BTW what game where you testing with? BTW by this example is possible to create a converter to a PS3 right? I dont mean even to get FFB just the joy control...
@hunbraze
2 жыл бұрын
Just finished it yesterday, it works great! Thanks Mate!
@javierpalenciarueda5819
Жыл бұрын
Can You help me!!! Please... it does not work for me!
@hunbraze
Жыл бұрын
@@javierpalenciarueda5819 I am super dumb in electronic. I just followed this vid with all it's tinest details. Rewinded quite a few time to make sure it was identical. My guess is that you made a tiny plug mistake in the breadboard. Hopefully nothing wrong with the soldering. Good luck!
@javierpalenciarueda5819
Жыл бұрын
@@hunbraze Thanks, I'll check it again... did the circuit work for you??
@hunbraze
Жыл бұрын
@@javierpalenciarueda5819 Yes. Everything was indentical to the video though. I went to my local electronic shop where the guy helped me buy the proper resistor and such. The only thing I can think of is that when I bought the microchip recommended, it was starting to get discontinued for a V2 version. I don't know if you got the exact same chip or the newer one. Got the old (the one in the video) and works like a charm. If I find my notes in my chaos, I will write you down the components I used. But it is a far fech project. Might never find them.
@user-en8gw8cp6j
7 ай бұрын
@@hunbraze support FFB?
@wezzil
2 жыл бұрын
Would you be willing to make one an sell it? An if so how much?
@RobertoDias63
2 жыл бұрын
Thank you Conrado! I hope to build one for me soon.
@user-ee8qv4jb4n
2 жыл бұрын
Ок. Спасибо. Всё работает!!!
@hunbraze
2 жыл бұрын
What wire gage would you use pls?
@conradovergueiro
2 жыл бұрын
Hi Jean, sorry for the delay. The cable I used was the 24 AWG. The capacitors are 1nanoFarad each
@hunbraze
2 жыл бұрын
@@conradovergueiro You've been such a charm to help me that much. But after going to my local electronic shop, I figure I had other question: "What is the watt that you use for the Resistor and Capacitor?" I took the chance with 1/4 Watt resistors and caps. But should I replace them? THANKS MUCH for your time! Really appreciated!
@hunbraze
2 жыл бұрын
I found a 240 Ohm 5% resistor (digikey returned me these info on color code of the resistor) laying around in my RC car kit. Could I use it instead of the 220 Ohms resistor since its close? or not close enough?
@conradovergueiro
2 жыл бұрын
@@hunbraze hi Jean. For the resistor I recommend using the 220 ohm, even though 240 looks close something may not work well. They are quite cheap. For the parts you can use 1/4 watt no problem.
@hunbraze
2 жыл бұрын
@@conradovergueiro I know, it's just availability! I went to 3-4 local shop and no one had the 220 ohms. lol Thanks a lot! I am soooo eager to test it. I soldered the Tensy 2.0 to the 24 pins and the DB15 port; my first micro-soldering ever. Really happy of the result but can't wait to test it and only missing the 220 ohms resistors. ;) Thanks again!
@user-ee8qv4jb4n
2 жыл бұрын
Добрый день. К сожалению на вин10 .не прошивается. Прошивка записывается но при перезагрузке не работает. Светодиод моргает. Очень жаль.
@hunbraze
2 жыл бұрын
Newbie question. Could it work just with the breadboard (encased so there is no shorts)? Or I really need to learn soldering? :)
@conradovergueiro
2 жыл бұрын
Yes it works! I actually used it with the breadboard for almost a year!
@hunbraze
2 жыл бұрын
@@conradovergueiro Thanks a million!
@hunbraze
2 жыл бұрын
@@conradovergueiro Since your'e so kind to answer, I will take my chance. - In the video you say "and 2 nanoFarad capacitors" and it confuse me. Do you mean "2 x 1 nanoFarad capacitors"? - Newbie question again. Do you think CAT 5e Ethernet network cables would be good for the colored cables? (If not, what gage am I a looking for please?) THANKS!
@musolo78
2 жыл бұрын
@@conradovergueiro Thanks for such detailed video! Wonder would it work with game port that has all 15 of pins. Like F-15E Talon with two hat swich and five buttons on the stick and 4 buttons and one slider swich on the base? if i did exactly what you did would it work partially at least? This video shows it kzitem.info/news/bejne/l4CilnihmquLrXo but it is not step by step like yours unfortunatelly.
@jasaircraft
2 жыл бұрын
Genio!!🎉🕶
@RanaRandom
3 жыл бұрын
8:16 That program interface brought me back during windows 98/2000 era. I Remember buying a PC controller that looked like a PSX, who loved to *drift* for some weird reason while playing MIcrosoft's HELLBENDER.
@arturbundchen6648
3 жыл бұрын
opa Conrado, eu tentei fazer o adaptador e infelizmente não deu certo. O microcontrolador não é reconhecido. :(
@conradovergueiro
3 жыл бұрын
Bom dia Artur. Nossa que estranho, mas o Windows nem reconhece para programar ou após a programação? Tem um comentário aqui de outra pessoa quando o Windows atualizou e parou de reconhecer, veja se ajuda: Solved, desistalei os drives do controlador USB, habilitei drivers não instalados e reprogramei o tensy. Ok
@arturbundchen6648
3 жыл бұрын
@@conradovergueiro Foi assim, eu conectei o circuito ja pronto pela primeira vez e dai o windows disse "configurando controlador usb", dai programei a placa, dai eu desconecto ela, conecto devolta e nada acontece. A versão do meu windows é a 21H1. Eu estou utilizando os capacitores e o ultimo arquivo .hex
@FHamoudi
3 жыл бұрын
Hi Conrado, thank you for sharing your video. I managed to get hold of a teensy. I followed your video and managed to get my MS FFB Pro working on a breadboard. I have tried soldering and every attempt I get the teensy's LED constantly flashing and sadly the FFB is not detected. I checked the soldering and tested with a multimeter and it looks alright. Could you please advise what am I doing wrong? Is it a case of bad soldering? I look forward to hearing from you.
@conradovergueiro
3 жыл бұрын
Hello Feras, the FFB was working while the teensy was in the breadboard? Try double checking all the wires. When I first tried I had the same problem, later I discovered I had one wire soldered to the wrong pin.
@FHamoudi
3 жыл бұрын
@@conradovergueiro Hey Conrado, thank you for your prompt reply. I will do that.
@Weizboy
Жыл бұрын
I think it’s because you used the wrong resistors. Check the resistors values. 2.2k and the 220 resistor. Let me know,
@arielpedraza07gamer85
3 жыл бұрын
Holaa Conrado, tengo un problema, ya hice todo y la luz del joystick enciende, pero no tengo ningun feedback y tampoco lo reconoce mi pc
@rainmaker3987
3 жыл бұрын
You absolute legend, thank you for the video
@djamelc
3 жыл бұрын
Could i buy one ?
@Marcus30011979
3 жыл бұрын
force feed back working ?
@robertspencer5377
3 жыл бұрын
the Utube video doesn't show the link for the adaptffbjoy-r54.hex. can you or someone send me or post the link
@randomtask99
3 жыл бұрын
I programmed my Teensy board OK using the hex file but Windows 10 doesn't recogised it when I plug it back into a USB port. I haven't soldered the wires to the board yet but I would still expect the Teensy board to work over the USB port with Windows. Do you know if the USB part still works with no joystick connected?
@sh018q2316
3 жыл бұрын
Hi, Just wondering if anyone has done this kind of MOD to the Microsoft Sidewinder Force feedback wheel?
@monolofiminimal
2 жыл бұрын
I'm also trying to get the Microsoft Sidewinder FFB gameport version working (I have both a pi pico/pi4 which can act as usb hid) but I haven't had any luck (as I am a beginner). Even the usb nest I bought does not work with it (I'm guessing because sidewinder series is all digital unless I am mistaken). Have you gotten around to getting it working yet? Edit: I found something that might work for us in this video "GamePort to USB Adapter for analog and digital joysticks" by Necroware
@BTKCuk
3 жыл бұрын
Thanks for the video - i followed your instructions and it worked 1st go. I didn't use the breadboard, just soldered the resistors and capacitors straight on to the teensy board which made it nice and neat. Just waiting for native FFB support in MSFS2020 now. It works fine in DCS, but there are very little FFB effects in that sim, though the Huey force-trim works great (which is the main reason for me wanting FFB).
@these.are.my.things
3 жыл бұрын
Hi I have one of these and it is working. However does the joystick automatically self center when you plug the power in without running the game? Or does it need to be in game for the centering to work.
@conradovergueiro
3 жыл бұрын
Hello James, it self centers in gamewhen the ffb is working. Sometimes depending on the game (rise of flight for instance) it does not center untill the plane starts running for takeoff.
@these.are.my.things
3 жыл бұрын
@@conradovergueiro thanks for that. I will test it properly tomorrow then.
Пікірлер