Yo I actually didn't realise that. I'm Australian tho.
@officialhuman-hl2ff
5 ай бұрын
That cool
@officialhuman-hl2ff
5 ай бұрын
I ment that's cool
@Obsidianxenon
5 ай бұрын
I figured
@Not_so_daily_videos
7 ай бұрын
Furst
@CidFFVII
7 ай бұрын
How much time are you loosing just buy the dry box. Time is money and its worth more than 100 dollars
@Obsidianxenon
7 ай бұрын
Did you read the pinned comment? This is a *TRICK*. I obviously recommend a proper drier it's just a tip mate.
@claymre346
7 ай бұрын
I literally bought a $14 food dehydrator and it has worked like a dream for the last 2 and 1/2 years
@pi3560
8 ай бұрын
If you havnt Electric cost
@goldenfinch5834
8 ай бұрын
a dehydrator probably works too, or an egg incubator as well if you have the extra patience
@user-kg6qy4nx1c
8 ай бұрын
Do not use this on normal printing temperature
@Obsidianxenon
8 ай бұрын
Ofc like I didn't heat the nozzle
@adventuregamer6499
8 ай бұрын
wouldn't that cost more long term? using that much electricity?
@drpeppero3
8 ай бұрын
Ive had PLA exposed for more then a year. Printed with them...nothing bad. I'm actually printing a gun frame for my quest 2 with 2 year old PLA filament. Ender 3 V2. Nothing bad is happening.
@buyerenogurlfwendo2106
8 ай бұрын
That is definitely smart- need to try this
@juliusfucik4011
8 ай бұрын
A filament dryer is more efficient. Also, once dry and in the dryer it no longer has to be on to keep it dry. You will be repeating your procedure ever so often.
@Obsidianxenon
8 ай бұрын
Dude why does no one read the pinned comment? It's a *hack*. Not a recommended way to dry your filament all the time buddy.
@star_wars_studs
8 ай бұрын
Nice
@Obsidianxenon
8 ай бұрын
This is a school technology project that we didn't get time to finish, so we had to do it in the holidays. I added my own finishing touches 😉. Also I filmed it for absolutely no reason lol.
@pandastreamer7720
8 ай бұрын
What printer I know it’s a ender3 but witch
@Obsidianxenon
8 ай бұрын
Ender 3 V2 Neo
@durikke2
8 ай бұрын
well this is kinda cool, but if you need to print within the 4-8 hours with another filament this does not help. have you tried it with a radiator?
@christurner4799
8 ай бұрын
My dehydrator was maybe $40, I use it from time to time but the best advice is to prevent moisture when possible. Ziploc bags and dessicant work well for storing. It's also worth noting the electrical use of your bed heating up and drying filament versus the electrical use of a dehydrator. The long term cost might outweigh the initial savings
@akbarabdurakhmonov3426
8 ай бұрын
Thanks! Now I can cook noodles right in my room
@nikolaiylimys5250
8 ай бұрын
Or just use kitty litter
@Obsidianxenon
8 ай бұрын
@@nikolaiylimys5250 Ok cool I don't have a cat so yeah.
@Obsidianxenon
8 ай бұрын
@@nikolaiylimys5250 lol
@tuffeludde
8 ай бұрын
Hello fellow neo users
@Obsidianxenon
8 ай бұрын
Hello
@tuffeludde
8 ай бұрын
@@Obsidianxenon it’s not a very popular printer isn’t it
@Obsidianxenon
8 ай бұрын
@@tuffeludde I don't see why it would be. It's just an Ender 3 V2 with a CR Touch
@chy4e431
8 ай бұрын
How the hell are you guys spending 100$? My dryer was like 30€ and works perfectly even on TPU
@jellybrain7207
8 ай бұрын
It’s good to print out of a dry box though
@Waffles4Penguin
8 ай бұрын
Anyways I got a dry box anyways… i can actually use my printer while drying filament too…
@chas7500
8 ай бұрын
I'd rather spend the 100 bucks
@Obsidianxenon
8 ай бұрын
Ok
@DragongeekAndCo
8 ай бұрын
Also, minor fire hazard. Don't leave unattended
@Turtlecuber
8 ай бұрын
So a standard dehydrator works too
@Obsidianxenon
8 ай бұрын
What like a food dehydrator?
@Turtlecuber
8 ай бұрын
Yup ive done it to many filament rolls and it works great
@Turtlecuber
8 ай бұрын
@@Obsidianxenon 😂😂😂 yeah i was just suggesting a cheaper alternative for those who will get something for it not all beds heat so 🤷♂️
@Obsidianxenon
8 ай бұрын
@@Turtlecuber I suppose you're right. I guess I just assumed everyone had an Ender style printer lol
@stygianrenegade
8 ай бұрын
Technically... If your print bed reaches 100C.. Then yes. It can cook your dinner😂
@two_friends31
8 ай бұрын
Well with that said my printer could make food
@floris2872
8 ай бұрын
If only my print bed was big enough
@davidd2661
8 ай бұрын
I'll try that and finally print good again
@JTCF
8 ай бұрын
My filament didn't come in a box... I just store it in a drawer that also has a fuckton of silica gel packets, even two big ones I bought apecifically for this.
@Ironboyhight
9 ай бұрын
Bro 🧉 😂😂
@sannhikdey8946
9 ай бұрын
Celsius or Fahrenheit??
@Obsidianxenon
9 ай бұрын
Aussie here so Celsius buddy. 140-158 in fahrenheit if you like.
@peacemker24k
9 ай бұрын
For filaments that absorb moisture really quickly though you need an actual dryer, and a way to store it properly
Пікірлер