Is there a bleeding process by any chance and the A5
@diwopp1
10 күн бұрын
@@me-pv4fn there is no bleeding process needed as you aren’t opening any brake bleeders or brake lines. Just compress the calipers in and replace the pads 🙂
@robertstephenson5178
18 күн бұрын
No brake pad sensor?
@diwopp1
10 күн бұрын
@@robertstephenson5178 there is one on the driver side I didn’t get a chance to record it. Very easy to replace just unplug it from the harness and unplug it from the back of the brake pad
@BrownAuto1
29 күн бұрын
Didn't show the sensor install 🤷
@OdotRIH4KRC
Ай бұрын
You did incredible
@b4rt3nd3r
2 ай бұрын
For a first time video I think you did an amazing job! Much better than other channels that have 1000's of videos. I'm doing my nephews A5 this afternoon, great video!
@derrincalk9579
3 ай бұрын
Would be nice if you had the camera at another angle so we could see what you're doing
@Mr-ki7rm
4 ай бұрын
I’m gonna attempt to do my front brakes on my 2015 Audi A4 S line .. hella nervous but gonna give it a shot 😅
@brentrickert9400
4 ай бұрын
Where in Canada was this?
@jonathangarcia7773
6 ай бұрын
Amazing job thank you
@ppeter7592
10 ай бұрын
Thanks man, I’m attempting this on my Audi A4 2009 tomorrow, very nervous but the video was clear and instructions were great!
@toxicklutch1861
8 ай бұрын
How’d it go bro? I’m gonna do it soon and I’m a little nervous myself
@Diirty-South-55
11 ай бұрын
Amazing job bro. well explained and shown, keep it up love the work..😊
@diwopp1
10 ай бұрын
Thank you so much 😀
@timr6603
11 ай бұрын
Great video but can't see where you're putting the pins or what you're doing? Do any other videos after this?
@AmericanCitizen-nf9xc
11 ай бұрын
“Odie”??? “Brembro”??? Lol 😂
@joeshmoe12301230
11 ай бұрын
Yeah….Bro, haha
@michaeljones1491
Жыл бұрын
Great video, many thanks. Have to do mine soon, 2015 A5. Crazy low kilometers for a 2014.
@danieltene2048
Жыл бұрын
Did you do it? Any tips? I have the same car
@michaeljones1491
Жыл бұрын
@@danieltene2048 Did the front and rear brakes over the past two weekends. Tough but manageable (had never done them before). Everything is pretty much the same as the video, and is straight forward enough. If you don't have an impact driver, make sure you have a breaker bar for the caliper retainer bolts, they broke my heart for a good hour. The brake pad that sits into the piston of the caliper is also tricky, use a vice grips to pull in the steel shoulders if you cant push it straight into it. Bear in mind you have anti squeal paste on the pads at this point and holding them/pushing into place is made more difficult by you not touching the squeal paste. Good idea to have a box of plastic gloves/nitrile gloves so when you're applying the copper paste/anti squeal you can just put a glove over your work gloves and then just peel it off. Open the brake fluid reservoir and place napkins all around it. I recently had a brake fluid change so was topped up, when you're pushing the piston back it'll drive some fluid out of the reservoir (unless you remove some first which I didn't do). I did have a second person helping me for most of it, especially the re-assembly. Don't hold back on the copper grease, you'll thank yourself in the future, one of my wheels was welded to the disk, took some serious kicking to get it off. Done with small trolley jack, jack stands and basic tools. Had 8-60 Nm and 20-210Nm torque wrenches, definitely torque everything back right if you can. Just send another comment if you're unsure of anything 👍
@AWilliamBishop
5 ай бұрын
Same dude 52k and I already had to do front and back
@CoinandRelicOntario
Жыл бұрын
It was probably already dead. I saw quite a few dead birds today from the crazy winds.
@JoyfulJapaneseMaples-us7on
28 күн бұрын
Falcons won't eat anything unless THEY killed it.
@CoinandRelicOntario
28 күн бұрын
@@JoyfulJapaneseMaples-us7onIn the winter when live prey is hard to come by the will eat dead animals. True fact, I've seen it with my own eyes!
@MAM-fw7sf
Жыл бұрын
Nature at its finest!
@vinceallen8548
Жыл бұрын
Great job I like the way you explained everything from start to finish step by step…. Thanks 🙏….
Пікірлер