This was the best "how-to" on the whole process. Was able to replace my battery in a few minutes. Thanks for sharing.
@your_fbi_agent311
3 ай бұрын
With my battery I had to remove the bracket that the brace bolts to and moved it to the left (if your facing the front of the Tahoe) and twist it to the right and lift it out that way.
@AndrewGarcia-sd2ed
4 ай бұрын
DENTED MY TAHOE DUE TO POOR ENGINEERING.
@sinivatuavao-tupou3450
4 ай бұрын
😅
@waynearrington7379
4 ай бұрын
Glad to see you had as much trouble as I had getting the battery out and back in.
@leoedwards3826
5 ай бұрын
Thanks!
@scooter95mph
6 ай бұрын
Love the chickens in the background. A real country boy
@kasieream1248
6 ай бұрын
Where is the ecm in this suv?
@qhardyq
6 ай бұрын
With model battery do you have?
@70ixlr86
7 ай бұрын
Thank you for showing the bellow strap secret. Semi long reach 2 or 3 jaw puller will grab the bearing once the rubber is off.
@daleadkins2448
8 ай бұрын
Them boys are a riot! Thanks for the video.
@kentuckysfinest-qg5qy
8 ай бұрын
Did yours come with a big ring for the fromt side I seen you knock the small ring on the back bit did you use the big ring
@x35mmman
9 ай бұрын
one video said to buy a plug in that keeps the electronics good...
@jchtgb
11 ай бұрын
Thank you. This helped a lot.
@js7916
Жыл бұрын
Thanks Buster!
@RobinatorsPlace
Жыл бұрын
The first video Ive seen where the tech uses real tools and not his mom's spatula to take the bearing off.
@marte1a256
Жыл бұрын
Im really screwed. I was changing the a arm bushings on my 99 scrambler 500 4x4 and noticed the cv shaft poped out and was just in the boot with 3 balls. Gigiddy! Anyways i took off the hub and reorganized all the balls. Now im going through hell to get the shaft back in. If i slide the shaft in to hub first then i cant get the splines through that big hole. If i put the splines berings and clutch thing through first then i cant get the shaft in. I even took off the shock. Managed to get everything in that way but now the dam shock wont go in to place. Im to broke to go to a mechanic if not i would’ve had a way better machine please help. I know my kids rancher will be easy
@IGotMotionSam
Жыл бұрын
Ain’t nobody gon hit you!
@bethanysmith1368
Жыл бұрын
You made that battery look so easy to pull out I wanted to fight someone after fighting it out 😂
@edwardeplett3231
Жыл бұрын
It comes off with a bearing puller
@ShooterMcgavin6
Жыл бұрын
Just smack the control arms with a hammer no need for an air hammer
@chumpchangetrader
Жыл бұрын
good stuff!
@johnroberts4760
Жыл бұрын
Thanks😊
@Jamescantfindaname
Жыл бұрын
Abysmal video. If I had a damn air hammer and torch I'd know how to do this shit.
@btakin8737
Жыл бұрын
How do you chalk wheels🤷♂️
@TheKingOfHalo
Жыл бұрын
I’ve done this before but I removed the air box and the coolant reservoir. This time I’m trying your technique and tilting the battery to remove and install it.
@loamyrodriguezvidal5764
Жыл бұрын
XDXDXD que 🤔 la información que 🤔 en la casa de
@loamyrodriguezvidal5764
Жыл бұрын
hola
@TiNkLeR247
Жыл бұрын
Just did the same with a 4626. Is or are there video of getting fluid back in the cyl and bleeding air from the system?
@ryanwinstead11
Жыл бұрын
not that i am aware of. Any cylinder i have ever rebuild will work air out on its own.
@carlavallee3527
2 жыл бұрын
Thank you for the video!!! I ended up buying a 20volt ratchet and felt like a superhero because of you!!! ❤
@GolfDaddySC
2 жыл бұрын
Thanks for the video. That battery was “too shifty” to get out! 😊
@DanTheMan-yz8zx
2 жыл бұрын
Thanks man, this helped me out today. I just replaced my factory battery the beast is starting lime a g.
@travisc5658
2 жыл бұрын
Edgar doesn't know how to use a torch or air hammer
@edgaralejandre1522
2 жыл бұрын
this videos is about how not to replace a carrier bearing lol.. with a torch and air hammer..
@RobinatorsPlace
Жыл бұрын
...if you aren't experienced. Watch the video or move on and make your own
@derekrugby
2 жыл бұрын
Goes to show you that you can find anything on KZitem lol.
Пікірлер