I've taken them off with the jack just like you started with but yes those hub busters works good.
@RR-gh8li
3 ай бұрын
Used a hub buster today. Made about 10 hits with 10lbs sledge hammer. Didn't think the hub was coming out after hit #10 . But it came out. Thanks hub buster!
@albertoascari2542
3 ай бұрын
Looks crazy....😊😊😂..if it works though...🎉🎉🎉
@bocutty
4 ай бұрын
Call Bs try 2000’s gm truck especially the Denali there’s also a video of this device being used to no avail
@johnlawson910
10 ай бұрын
Didn't work for me...been hitting the hub buster for 2.5 hours on a car from western NY. No movement.
@bulletclub4life
Жыл бұрын
north east
@kingfreedom1863
Жыл бұрын
Jack it then smack it 🙄
@belowfray5251
Жыл бұрын
Nice tool
@belowfray5251
Жыл бұрын
For my next trick.....I'll catch this hub with my face. Glad u didn't
@josephherron7671
Жыл бұрын
Not does what you thought you were proving by jacking the bearing. That’s where all the weight is supposed to be. Pushing up doesn’t do shit. You have to pull OUT.
@rocastyle86
Жыл бұрын
Lol one hit
@malenaozzimo8966
2 жыл бұрын
Lo w ya daddy
@carmac1652
2 жыл бұрын
Yes I did the same did not move with my Jack 👍kzitem.info/news/bejne/uYBj0J17gYaYhIo
@eduardodaquil158
2 жыл бұрын
Can it be used in front hub also?
@TreeBeardNero
2 жыл бұрын
😲Thank you for the helpful! E .🤓
@wildmanturner
2 жыл бұрын
Put a thick coat of marine grease on your splines and flanges during install and you won’t have a problem getting them off next time.
@KLNYC
2 жыл бұрын
salt belt states really sucks when comes to remove hub bearing.
@grandinfinite5921
2 жыл бұрын
Same situation. Don't want to spend $$$ for something I will not use after it's done. I know the old hub is trash. So? I used a chisel and a regular house hammer along with a can of liquid wrench and wacked it from the inside, where the e brake cable connected. Did take some time. But, I'd rather pay and loose a chisel over $$.
@eriklarrison4996
2 жыл бұрын
Good way to bend the axle putting that jack directly under the hub and putting all that weight directing on the hub!
@CookedTickabc
2 жыл бұрын
Literally how the wheel stays on
@surreal_seb
2 жыл бұрын
Well the point was the hub Buster can break free the most stubborn of hubs 😏😏
@markwangontario7573
2 жыл бұрын
For $200+ Canadian dollars? No. I used a pipe wrench.
@crispychicken2743
2 жыл бұрын
That tool is no good. Will only work on that car : how about a 2000 f350 4x4 will it work one that truck ????
@crispychicken2743
2 жыл бұрын
It will not come out like that
@reynaldomalapad
3 жыл бұрын
Nice 👍👍
@rudyzamora2732
3 жыл бұрын
Corona virus
@shaneonews6791
3 жыл бұрын
Need to ask. Is this ok? Won't damage the assembly at all? Juts asking.
@charlesebyjr2925
3 жыл бұрын
Ah you forgot something
@numberpirate
3 жыл бұрын
I think you should go into the proctology exam business.
@mrregal5662
3 жыл бұрын
Mickey mouse jack
@boarzwid1002
3 жыл бұрын
Well I just knock a lug stud out and insert a long grade 5 or 8 bolt with a nut screws to the inside hold the nut whith a wrench and ratchet on bolt and Hub comes right off ,
@californiadreaming9216
3 жыл бұрын
Terrific idea. Worth its weight in gold.
@garyh4458
3 жыл бұрын
Nothing good comes from doing mechanical work with a hammer. I will pass.
@Jdres123
3 жыл бұрын
I guarantee after he posted this, his design got copied and sold into oblivion. No updates, no website, a bunch on amazon with different names from other tool companies. Its a tough sell when the average DIY can rent a bearing puller or slide hammer from the autoparts store for free.
@randyward4591
3 жыл бұрын
This thing is bullshit on a Subaru hub. I’ve been there done that! All that would do was bend the shit out of the hub and never removed it. I tried a large heavy duty slide hammer and ended up just ripping the hub and bearings right out of the housing. Ended up taking to Subaru dealership to have it removed and they told me the only way to remove these is with a air hammer on the back side of the hub. They had it off in 30mins. I never in my life seen a hub that I couldn’t get off till this Subaru
@f3arful
3 жыл бұрын
Not effective there's much better and safer ways of doing this. Invest in an air hammer You hack.
@snap-off5383
3 жыл бұрын
I live in arizona, and buy arizona cars. Mine FALL out. {:-)
@lakeyoung6963
3 жыл бұрын
I wonder if knows about PB blaster or WD-40 an the fact that the second hub he "took off" was broken in half lmao that job just got alot harder for him🤣☠
@rrizz2050
3 жыл бұрын
Rear bearing is still in the race, it appears you snapped the hub in 2. try getting that out with your hammer.
@stevenbryant4718
3 жыл бұрын
2000 pounds LOL. More like 800 pounds.
@yomomma107
3 жыл бұрын
97 bucks for this thing...really Or $6 pipe wrench from harbor freight hmmm
@SooSmokie
3 жыл бұрын
10 days too late
@alm7707
3 жыл бұрын
now demonstrate that on a 1 ton dodge with 450,000 km see if 1 blow works.
@GeneralChangOfDanang
3 жыл бұрын
Oh that can't be good for it.
@YouStupidBunny
3 жыл бұрын
It may have already been said, but that tool uses the same principal as using a pipe wrench on the hub flange. You probably already have a pipe wrench. If not, go to Harbor Freight and get one for $20. It's also a tool you can use for other jobs.
@rustyaxelrod
3 жыл бұрын
Looks like a good last ditch effort tool. If they won’t tap out or come out with a slide hammer, this would be better than pulling the strut to get it in a press but it does roll the bearing from the seat rather than pulling it straight out.
@yashiroku
3 жыл бұрын
So yall just gonnas skip to the rear after you broke the abs sensor...LOL
@DigitalGold3D
3 жыл бұрын
Aka nutbuster
@banditcoots
3 жыл бұрын
What a bunch of idiotic comments by morons who have either never done a bearing and hub before or having nothing else to do with themselves. Well, I did my own and it was the most frozen hub I had ever worked with. I ordered the hub buster and it took lots of hits but the whole assembly did com off. This product works and I will surely keep it in my tool chest. The only place where I could find it was Amazon. This product solved my problem. Great job to whoever created this tool. Thank you and to the morons: go find something to do with yourselves.
@mattbeckmann1928
3 жыл бұрын
thank you for that information now go build me one
@Friend_of_the_One-Eyed_Ladies
3 жыл бұрын
"Must be 2000 lbs of force on that wheel." Ya so your Grand Am weighs 8000 lbs then?
@joeseda8102
3 жыл бұрын
Easiest way to do it is to loosen the hub nut about 1/4inch and drive vehicle on safe open road or parking lot in zig-zag formation. You will hear when hub pops out and can be safely and easily removed. Same procedure works well for stuck/rusted brake rotors.
Пікірлер