Very nice video, thank you for doing this. Ignore the negative comments from the losers.
@nickholderman4891
2 ай бұрын
Good video. Two tips. When you pour new oil from the 5-qt container, tilt the container toward the wide side, not the narrow front side, and you won't spill oil (see 8:33). Also, torque wrenches are valuable, because it's easy to break the plastic oil filter cartridge. Happens a lot. BTW, I believe you can still return those Pittsburgh jack stands to HF for their Daytona jack stands, which are significantly safer.
@classikz
2 ай бұрын
Nice job. I had my first service done at the dealer because it was free and they spilled oil all over the engine cover and didnt bother cleaning it.
@thedrmteam100
2 ай бұрын
Just buy a set of ramps…the car gets jacked in a few seconds
@canawler1968
2 ай бұрын
Great video! I bought a '24 Meridian like yours last fall and love it so far. I'll use the dealer's first two free oil changes then it's all DIY after that. 👍
@ChicagoRob2
3 ай бұрын
Please, please use jack stands along with the ramps. You can never be too safe.
@zhanatomarov3984
3 ай бұрын
Keep ua posted. Please, very interesting! I gonna buy this Mazda!
@2AToday
3 ай бұрын
This is unwatchable because of the music
@victorbaird8220
3 ай бұрын
You need new tires 😊
@deepchhayani2109
3 ай бұрын
Nice gloves
@MikeAveli.
3 ай бұрын
Well done man! 👏 I recently bought a 24 cx50 and I found this very useful 👌
@AltafHossain17
3 ай бұрын
Glad you liked it!
@alejandro2543
4 ай бұрын
oil 0 - 20w. ??
@AltafHossain17
4 ай бұрын
5W30
@reddysankeerth
4 ай бұрын
Usefully video
@AltafHossain17
3 ай бұрын
Thanks a lot
@juliolazarosalgadotamayo1385
4 ай бұрын
Ese carro se puede levantar por ahí alabte
@penthar6655
4 ай бұрын
Nice to see you pre fill the new oil filter before installation! Many people neglect doing that with a vertically mounted filter. It’s the best way to achieve instant oil pressure at startup.
@ChicagoRob2
3 ай бұрын
Always prefill. It takes 2-3 seconds for the oil pump to fill the filter, if it’s empty when mounted.
@andresburgos5802
4 ай бұрын
Muy bueno 👍very good,I’m Tixidrive too
@mikejones762
4 ай бұрын
missed the slots on the splash shield cover
@carlosramirez4724
4 ай бұрын
Great but leave the music out.
@AltafHossain17
5 ай бұрын
Thank you all for your support, please subscribe to my channel 🎉
@spotiercanoe9414
5 ай бұрын
Should post more maintenance videos for cx 50 I love mine
@user-ko9ql5bm9v
5 ай бұрын
Good video man! I have CX-50 too and I absolutely love the driving dynamics. Handles so well overall. I use mine for a lot of car camping Spring through Fall and it's just a perfect vehicle for my needs. Owned BMWs and Toyotas in the past and I must say, Mazda has best of both worlds.
@ChicagoRob2
3 ай бұрын
I have a mint ‘17 Camry SE, which is a great car. I like my wife’s CX-5 a lot better.
@user-ko9ql5bm9v
3 ай бұрын
@@ChicagoRob2 If it wasn't for my lifestyle, I would drive a Camry for rest of my life man. I owned few Camrys and they are one of the best vehicles on the planet. If you travel to any country in the world, you'll find a Camry in one form or the other (different model names). They are so reliable and easy to maintain. One of my friends bought my Camry and he drove over 100K miles and still uses it for his main commute car. It's got 200K+ miles and still looks new. Mine was 10 years older than yours.
@seanh2390
5 ай бұрын
always good to see someone doing their own maintenance
@barneyboyle6933
5 ай бұрын
On the turbo models all four tail lights illuminate, but on the non-turbo models only the outer two illuminate. I saw a website (milk store ph) selling tail light assemblies which they claimed would illuminate with all four lights. There just aren't many resources out there yet for these little projects on the CX-50 so I can't tell if it's an easy job or not (There is a popular reddit post where a user modified his non-turbo tail lights to illuminate all four lights, but he said it was an extremely difficult process that wasn't worth the effort). Yours is the first channel I found doing any sort of basic maintenance demos. If you keep it up you might wind up with a lot of views
@eleanormassaro5195
5 ай бұрын
Would love to be able to have that modification on my non-turbo premium plus CX 50!😁
@barneyboyle6933
5 ай бұрын
Thanks for including that tire rotation pattern guide. As simple as it is I'd never seen it explained before
@AltafHossain17
5 ай бұрын
Glad it was helpful!
@chrislim7976
5 ай бұрын
Buy some shoes.
@Emporerking27
5 ай бұрын
Next time punch a hole in the bottom of the old filter before taking it off. It will drain the filter without getting it on you or your driveway
@hunorsardi5348
5 ай бұрын
To push downward the dynamometric wrench is easier than pull upward ;)
@brooklyn560
5 ай бұрын
10k for a turbo is kinda crazy. First 1k miles and 5K miles after that. “Oils and filters are cheap, new engines are expensive”
@eleanormassaro5195
5 ай бұрын
I thought it was supposed to be 7200 miles for oil changes on the CX50, but I’ve been getting it done every 5000 miles on my nonturbo CX 50
@TACOMPUTER
5 ай бұрын
your bulong how Nm?
@AltafHossain17
5 ай бұрын
Sorry, I didn't understand
@blockisle9
5 ай бұрын
10K miles first oil change? 1k for my first then every 3-3.5K after that.
@AltafHossain17
5 ай бұрын
Mazda recommends changing within 5k miles when you drive in rough conditions. I try to do it around 5k to 6k miles.
@blockisle9
5 ай бұрын
@@AltafHossain17 mazda is only concerned to get you through the warranty
@user-wc8cn7pt6m
4 ай бұрын
Does Mazda offer free oil changes the first year or something? How long is there warranty?
@AltafHossain17
4 ай бұрын
@@user-wc8cn7pt6m They only give me one free service. For next service I went there they charge me $100 just for oil change.
@ThisAintIt435
2 ай бұрын
3 is a little excessive, 5k should be fine for normal use even with the turbo.
@MrMianfsd
8 ай бұрын
Aslamo Alikum Brother, Plz send a link for a video about Transmission oil drain and fill or level checking for Transmission oil. JazakAllah
@letzrockitrite8469
8 ай бұрын
nice job Altaf ... just what I needed to see
@amigogarzes2350
10 ай бұрын
great video thanks
@hc3550
10 ай бұрын
oh buddy lol so messy stop it. also, check the oil level when the car is at operating temperature (oil expands), also they make these cool things called torque wrenches
@AltafHossain17
5 ай бұрын
If you think that's dirty maybe this isn't job for you
@whiteworx1977
10 ай бұрын
Excellent video! I came for the oil change instructions but you provided so much more. Well done.
@los4214
11 ай бұрын
that's a fine video!
@jamesfox406
11 ай бұрын
Great video! Thank you
@javierjuarbe9965
11 ай бұрын
This is honestly the best video anybody can use. It explains everything perfectly for an amateur like me lol
@kimchee94112
Жыл бұрын
New and improved oil filter design, not! First time learning process, the older Toyota filter wrench didn't fit as with all my various other filter wrenches. On kinda fits but slips. Got a new wrench just for the new filter style. Holy smokes the Toyota dealer tighten my oil filter to more than what was even required for the lug nuts! Could have broken something by using a breaker bar. Anyways watching your video and getting the hang of it. Old style spin on filters much easier to change without all the extra process and what happened to filter locations accessible from the top? Oh yes, transmission oil change, there is no dipstick! My old code reader couldn't read temperature which required for the tranny oil change. Got the Xtool D7 that could, more compatibilities and options than I ever needed.
@SaadKidwai
Жыл бұрын
Thank you
@label1877
Жыл бұрын
My sis has that same Camry. Drove it 140 miles to a Clemson game. That car is a rocket with the 4 cylinder. Cruised at 90 mph most of the way. 31.2 mpg too. Dang
@HakimDFrye
Жыл бұрын
She may have had it in 4th. It picks up faster in that gear than in drive.
@boywonder8175
2 ай бұрын
Nice!!!!
@joellozano589
Жыл бұрын
Does the oil plug need a gasket
@derektimmons6495
Жыл бұрын
Not this one
@kimchee94112
Жыл бұрын
New crush washer recommended, been lazy and reuse the one already in the plug. So far no leaks from the oil pan, yet.
@ironhorsegladiator5034
Жыл бұрын
Good video for where to position the jack stands and how to properly lift the car. Dealers just cannot be trusted as they charge you for premium synthetic oil but use regular oil and worse, may not even change your engine oil but charge you for it, yes, there are dealers out there that do this, but not all dealers are stealer. ;-)
@AltafHossain17
Жыл бұрын
Good way to find your car jacking point is from your manual book.
@blackonepac
Жыл бұрын
Good job thx
@gunaseelansengodan469
Жыл бұрын
superb sir yhankyou
@olatundeabiri7048
Жыл бұрын
Nice video. I like your oil drain pan. Can you please share the link? I want the buy same or similar oil catcher. Thanks
@AltafHossain17
Жыл бұрын
Thank you. It's similar to mine, you can use this link amzn.to/3EeZrwv
@leo8780
Жыл бұрын
I recommend cleaning the throttle body and mass air flow sensor when you get a chance. Also add a bottle of fuel system cleaner at your next fill up. After I did this my oil consumption went away and my idle was smoother and gas mileage went up. It's something you can do on your own to keep the car going well past 200k.
@AltafHossain17
Жыл бұрын
Thanks for the tips!
@kimchee94112
Жыл бұрын
Doing that on the old Camry, first time after 130K miles!
Пікірлер