Insulation is all you need . And say good bye to the horrible sound. Thats a joke , jeep cant even put insulation at the speaker box..50k car WTH✌️
@hoppskippity
4 ай бұрын
Nice! Which dash pad is that?
@TheGreaterThanClub
4 ай бұрын
Dash designs
@kca357
4 ай бұрын
My wife does videos like you lol she says yay
@ethaonslaught
4 ай бұрын
Nothing to extreme. Just kept simple , cant never go wrong with that
@visiononeproductions3272
5 ай бұрын
Did you also paint your front bumper?
@TheGreaterThanClub
5 ай бұрын
yes i did
@marlenc3084
5 ай бұрын
Do you think this could work if I had 8 people pick up mine?
@TheGreaterThanClub
5 ай бұрын
yes its really not crazy heavy ive seen 2-3 men lift it up
@JefferyEverett-d1p
6 ай бұрын
I came here for the information about painting the powder coated bumper! Not a fan of the gray color choice but… it’s not my vehicle and I still think it looks good. I appreciate the share of information.
@JefferyEverett-d1p
6 ай бұрын
Also, as an Army veteran… I say “Thank You” for your service!
@MRNICENASTY
6 ай бұрын
Love your channel I own a 96 myself check it out on my channel 😎
@muggz1015
6 ай бұрын
How many of those cross members that the bed sits on are there in total including the rear one that was attached to the sides?. I have a long bed that came with the bed semi taken apart and including the rear cross member that sits right behind the bumper, I have a total of 6 but it seems like I am missing one in front of the two wheel tubs .not sure the total amount required for a long bed
@biggbuddha2879
7 ай бұрын
Nice car bro...i have a 96 caprice also. What did u do to remove the side molding?
@TheGreaterThanClub
7 ай бұрын
Thanks. They were actually off when I bought the car
@aaronhuskey8581
7 ай бұрын
Nice. I have a 95 DCM Impala ss and a 96 roadmaster wagon. Both need work. I'll get to it
@domingodeanda233
7 ай бұрын
That was pretty damn good, thanks
@pyromac8414
8 ай бұрын
Bro I need the links to every thing you used !!!
@TheGreaterThanClub
8 ай бұрын
OctoRose Thick Durable Upholstery Soft Micro Suede has a Polyester Backing Sewing Fabrics 59" Width Sewing Fabrics Order by Yard (Microsuede-Grey, 1 Yard) a.co/d/3g5PHZn
@TheGreaterThanClub
8 ай бұрын
3M Headliner & Fabric Adhesive, 18.1 oz. Aerosol Can a.co/d/al9JyUJ
@pyromac8414
8 ай бұрын
Where you get your material ?
@TheGreaterThanClub
8 ай бұрын
Amazon
@stezdag8t
9 ай бұрын
I'm still debating on what I want to do but you gave me a Great Idea 💡 🤔!!
@stezdag8t
9 ай бұрын
Dope 💪 💪 💪!
@BPorter215
9 ай бұрын
Nice job I have a 96 caprice also
@sneadem79
9 ай бұрын
Question... I have a 96 Caprice and I'm deciding on a head unit as we speak... Would you mind sharing which model Alpine you chose? I'm also curious to know which kit you used. Both the 9'" and 11'" Alpines suggest using a single din kit and I believe that you stated in your video that you used the ETCHUS double din... I'd like to make certain that I'm purchasing the right parts. Really appreciate you help with it!
@TheGreaterThanClub
9 ай бұрын
I have the I’ll-f509. My setup is a bit custom. I do have the etchus dual din because before I had this alpine I did have a regular dual din. The alpine does use a single din so I bought a dual din to single din kit and installed it In the double spot. You don’t need etchus if you’re running a single din unit.
@sneadem79
9 ай бұрын
Thank you. Since I'll need to relocate the A/C knobs to the bottom so that the screen sits above, I imagine that I'll need to purchase a single din kit with the relocation option for it. Is this correct? If so, do you have a recommendation for a good kit?
@TheGreaterThanClub
9 ай бұрын
@@sneadem79 yea the only one I know that relocates with single din is the detailss one
@kool-aidman5828
10 ай бұрын
That is a pretty bubble Chevy. Just one thing I hope you get classic car insurance if you planning on driving this thing.
@TheGreaterThanClub
10 ай бұрын
thanks and i dont have classic because its a daily but i do have it insured plus the value of all additions ive added.
@kool-aidman5828
9 ай бұрын
@@TheGreaterThanClub yeah, I forgot that you said that in the beginning of the video that this was your daily
@seanjhonson6441
10 ай бұрын
Nice work!
@Dustykeybkards
10 ай бұрын
Wanna sell them other springs?
@TheGreaterThanClub
10 ай бұрын
Yea I’ll sell them
@konbromotors1006
10 ай бұрын
I just got me a 69 c10 custom shortbed
@kevinjohnson1958
10 ай бұрын
After this description it's easy to see why the interior got a complete refresh. I like it, you have a good daily driver.
@Grant7
10 ай бұрын
Clean…..
@TheGreaterThanClub
10 ай бұрын
Preciate it
@eric6650
10 ай бұрын
That silver sound dampener, is it needed?
@TheGreaterThanClub
10 ай бұрын
no its not needed but it quiets the cabin from outside noise and vibrations. Its actually a pretty noticeable difference
@retro_rmw8099
10 ай бұрын
Enjoyed this video
@TheClassicReport101
10 ай бұрын
Look good
@TheGreaterThanClub
10 ай бұрын
Thanks
@843rek8
10 ай бұрын
🔥🔥🔥 nice setup
@TheGreaterThanClub
10 ай бұрын
Preciate it
@stevecri123
10 ай бұрын
How long did it take you
@TheGreaterThanClub
10 ай бұрын
A few hours
@stevecri123
10 ай бұрын
@@TheGreaterThanClub i have the similar set up to my install
@macraith
11 ай бұрын
So much better than the video RC puts out. Thanks!!!
@LongRangeDesertGroupX
Жыл бұрын
I was curious if you could paint the plastic fenders, I was about to buy the paintable ones but I really didn't feel like spending $1000 on new fenders and then paying to have them paint matched. I may go this round and sand them down and paint them and clear.
@TheGreaterThanClub
Жыл бұрын
Definitely worth it the “paintable ones are exactly the same material just smooth vs textured
@LongRangeDesertGroupX
Жыл бұрын
Oh okay, I thought they were a fiberglass material vs plastic. Good to know.@@TheGreaterThanClub
@rudydog420
Жыл бұрын
Do you remember what the lenth was of your 2ing round stick braces??
@TheGreaterThanClub
Жыл бұрын
30 7/8 and 26 3/4
@lestervaldesnunez74
Жыл бұрын
I love that if not round. It’s square like the truck’s body
@txb870
Жыл бұрын
Whimpy? Wtf
@fernandomartin624
Жыл бұрын
Amazing job such detailed explanation thanks brother!
@AlbertBrotherProductions
Жыл бұрын
So was your amp powering your subs and speakers or do you have 2 amps?
@TheGreaterThanClub
Жыл бұрын
Amp powering both I had a 5 channel amp
@AlbertBrotherProductions
Жыл бұрын
@@TheGreaterThanClub ahhh okay I’m getting ready to add subs and new sound bar with 2 amps. My concern is PAC AP4-CH41 (R.2) not supporting multiple amps.. Factory amp Speaker amp 4 channel Monoblock amp for subs
@TheGreaterThanClub
Жыл бұрын
@@AlbertBrotherProductions you can buy rca splinters to send the signal from The pac to both amps the issue is it will be full range signal so your sub will play audio as well and not jus bass notes. I would look into the lc6i or that pic series in general to s the which fits your setup mends best
@AlbertBrotherProductions
Жыл бұрын
@@TheGreaterThanClub I’ll look into that! Last question as I’m trying to wrap my brain around all of this.. would the LC6i be in replacement of the AP4-CH41 or would they work together?
@TheGreaterThanClub
Жыл бұрын
@@AlbertBrotherProductions replacement
@Byrdmann_TV
Жыл бұрын
At least do a trunion upgrade to the rockers. The needle bearing in the rocker are a failure point.
@mirabalmedia
Жыл бұрын
Are you in Florida?… I see the Florida tag on the wall. I love what you are doing. I been building a 2000 Silverado doing a 6.0 swap. Next is to lower the truck which I will need to do a step notch. I already have the 3link coilover kit. Also, I have a set of Intro wheels 24/26.
@TheGreaterThanClub
Жыл бұрын
Thanks… I’m not in Florida anymore. Im from tampa I live in Cali now…. I wanna do one of those too street truck style
@TruckThisGarage
Жыл бұрын
How many bolts actually held the bed on? 4 Trying to figure out where the main bolts go
@TheGreaterThanClub
Жыл бұрын
I believe there was 4 main bolts in each corner but I can’t actually remember
@TruckThisGarage
Жыл бұрын
@@TheGreaterThanClub no that Sounds right. I think they go all the way through the frame. Ok thanks man.
@hangemhigh64lv
Жыл бұрын
Thank you for your service 🇺🇸
@stevestock2439
Жыл бұрын
Good vid thanks!
@ericb1324
Жыл бұрын
Thanks man for this video!
@jumperdp
Жыл бұрын
Did you have to plug in the two smaller harnesses together for the amppro and are you still using factory sub with aftermarket one?
@TheGreaterThanClub
Жыл бұрын
Are you talking about the 2 little white connectors? And yes I still had the factory amp hooked up
@socalcdm6497
Жыл бұрын
Great video, continue I’m learning just watching you. I am working on a 64 c-10, thank you bro
@rodneyhaskins7782
Жыл бұрын
What is half ride?
@TheGreaterThanClub
Жыл бұрын
If you are talking about when I said half travel it’s half the distance from the lowest your suspension goes to the highest it goes
@shirleyewing7304
Жыл бұрын
Lighting is terrible. Can you shake too much?
@malnik77
Жыл бұрын
great video. thank you
@rickyspeakes1114
Жыл бұрын
The first keep dealer told me that’s how keeps drive. Mine is a 2020 JL. The second dealer replaced steering gearbox and dampener under warranty.
@TheGreaterThanClub
Жыл бұрын
Some of the people a some dealers are crazy
@biggins-2178
Жыл бұрын
Looks amazing thanks 😊
@scottcarder3569
Жыл бұрын
Your video helped big time man! We all make mistakes an I'm really glad you stopped an showed us the good the bad an the ugly of it good job over all !
Пікірлер