I just watched your videos dude, at least mines only a few seconds of wasted time 😂😂
@bobdidit55
Ай бұрын
Wipe them with some ACF 50 and it will stop any corrosion.
@C6MSX
Ай бұрын
That’s a good idea! I didn’t know titanium corrodes like that but will bear it in mind
@АлексСереденко
Ай бұрын
Судя по тормозным дискам ,она или не ездит или хозяин забил как и на повороты😂
@C6MSX
29 күн бұрын
It was a wet day haha it’s just wet discs! Even when you wash car discs look like that.
@just_willow
Ай бұрын
Rust looking nasty
@C6MSX
Ай бұрын
Good job it’s only surface and behind the cap 🙂
@panchopistola8298
Ай бұрын
That doesn’t make their drivers any less shitty
@C6MSX
Ай бұрын
😂😂 I’ve had a varied past of what I’ve driven so I know where my indicators are mate
@C6MSX
Ай бұрын
#carporn
@notverysmartstudios6813
Ай бұрын
Some fake ass mods lol. Rice shit right here
@C6MSX
Ай бұрын
They’re genuine M performance exhaust tips on a M performance Exhaust bro… 😂
@notverysmartstudios6813
Ай бұрын
@@C6MSX still a pointless ass mod
@C6MSX
Ай бұрын
@@notverysmartstudios6813 sure bro 😂
@Arty-o2v
Ай бұрын
Car+10000aura
@C6MSX
Ай бұрын
Let me know if you want to see any more videos!
@lonewolfe7343
Жыл бұрын
Next time ur in that asda, av a luk over the wall by the ATMs, to the rhs, u'll c my Suzuka Grey.... 😂
@tishawnlopez1518
Жыл бұрын
🔥
@Desyboy-jj1zq
Жыл бұрын
Can you put on a3 2008 tdi?
@C6MSX
Жыл бұрын
Would sound completely different mate, different engines altogether
@TheDnzZx
2 жыл бұрын
What % tints you got all around mate?
@C6MSX
2 жыл бұрын
It’s privacy glass on the back and 50% on the front bud
@askbats5407
2 жыл бұрын
Correct me if im wrong but does this have an rs3 engine or exhaust??
@C6MSX
2 жыл бұрын
Neither mate! S3 2.0 TFSI engine and aftermarket exhaust system
@askbats5407
2 жыл бұрын
@@C6MSX do you have any info about the exhaust. Because this shit sounds exactly like an rs3. The tone at least
@fullstrbull
2 жыл бұрын
Did the bad wheel bearing give you any steering wheel shake?
@C6MSX
2 жыл бұрын
Hey man, yeah it did around the 80mph mark, had to get it tracked back up after we changed the Wheel Bearing to make sure everything’s still straight too, always worth it
@travisfs7526
2 жыл бұрын
Keen to get my B7 A4 sounding like this
@C6MSX
2 жыл бұрын
Get them cats gone bro
@eduardopizarro3692
3 жыл бұрын
👍🏾
@marijn8579
3 жыл бұрын
What kind of lamps do you have?
@C6MSX
3 жыл бұрын
These are standard xenons
@ym6390
3 жыл бұрын
Got a same s3, your videos help me a lot Continue bro💪💪
@C6MSX
3 жыл бұрын
Love to hear it bro! 👊🏽👊🏽
@deansteedman2016
3 жыл бұрын
Did you have to get it mapped after fitting the downpipe mate mine has a stage 1 just now. I’m looking to get some set up as yourself already have the milltek catback
@C6MSX
3 жыл бұрын
Hi mate no mine was already mapped hence I have an EML for emissions, I’ll need to get it mapped again ideally, see if your mapped will do an adjustment to map the cat out 👍🏽
@sahinsalim3696
3 жыл бұрын
Can you explain how to wire the auto start installation please any link ?
@C6MSX
3 жыл бұрын
Hey mate, see if there’s a link online or a forum, mine is wired to the ignition
@MadbazNZ
3 жыл бұрын
Love the car mate. I have the same model, same colour here in New Zealand. Where did you get that rear spoiler extension from? Cheers.
@C6MSX
3 жыл бұрын
Ayyy greetings to you in New Zealand dude!! I got it from Maxton Design 👊🏽👊🏽👊🏽
@MadbazNZ
3 жыл бұрын
@@C6MSX Thanks for that. I've had a look at their website, they have some great stuff. Cheers.
@fibrex_942
3 жыл бұрын
Can u give me some info about the autostart amd the beautiful flip thing that u have , the one that u can hide the lighter i love those two mods there to add to mine . Also the grill is a genius rs3 mask or a replica one cheers
@C6MSX
3 жыл бұрын
Hey man I appreciate that! The button, surround and 12V socket are all from the RS4 B7, the wiring is quite simple and the Grille on mine is a replica 👊🏽👊🏽
@fibrex_942
3 жыл бұрын
@@C6MSX thanks for reply
@jays9213
3 жыл бұрын
Man like Big Waq's 💪🏽 Great video and production 🙌🏽
@jays9213
3 жыл бұрын
Beautiful 😍
@henrysprake4243
3 жыл бұрын
Hi mate, love the centre console mods, was wondering where you got the parts for that from?
@C6MSX
3 жыл бұрын
Thanks man I appreciate it! For which bit mate the Start button and flip 12v?
@davidkane8660
3 жыл бұрын
I'd like to know where to get the start button and flip 12v from too bud
@C6MSX
3 жыл бұрын
They both come from the RS4 B7 as an OEM part, the entire plastic insert, including the 12v and start button, you just had to relocate your aux and do some wiring 👍🏽
@davidkane8660
3 жыл бұрын
@@C6MSX decent cheers buddy ill have to look into doing it
@C6MSX
3 жыл бұрын
@@davidkane8660 No problem, just be quick on breakers because it’s a part that goes fast 😜
@aminkhan1292
3 жыл бұрын
id like to race you bro, i have a fwd a4 b8 1.8tfsi
@C6MSX
3 жыл бұрын
I’m always down 🤪
@jakuub8355
3 жыл бұрын
Hi, Can you provide the dimensions of the rims? Like ET etc.... thanks
@C6MSX
3 жыл бұрын
Hi mate these were 19x8.5j et 43
@N1NJAKIDD
3 жыл бұрын
Good vid. It would be good to see a journey to stg2+ or maintenance tasks, as a lot ppl are picking up these cars recently
@C6MSX
3 жыл бұрын
Hey thanks! Yeah I kinda messed up and done a lot of the mods early on before I started recording and documenting but I’ll find some more stuff to get onto! Appreciate the message man 🙏🏽👊🏽
@lowkeybrian1323
3 жыл бұрын
What do you use to play music bro?
@C6MSX
3 жыл бұрын
Hey bro I use a Tune2Air Bluetooth module which runs alongside the factory AUX 👍🏽
@aidanmunro7186
3 жыл бұрын
Might be buying an s3 weekend given me a couple ideas for when I get mine, class video mate
@C6MSX
3 жыл бұрын
No worries man! Glad to help 👊🏽
@sire5582
3 жыл бұрын
A bit too loud for my liking but a nice aggressive rasp for sure.
@rosscarstories
3 жыл бұрын
That's a lot better than the stock backbox 😁👌🏼
@rosscarstories
3 жыл бұрын
I don't like this sound because the stock backbox isn't made with a free flow pipe inside of it
@C6MSX
3 жыл бұрын
Me neither bro! That’s why I ended going for a Milltek backbox after this, see my other video
@dennisultracep8746
3 жыл бұрын
😍😍😍😍😍
@C6MSX
3 жыл бұрын
❤️👊🏽
@tyronedelgado3474
3 жыл бұрын
We’re you buy that’s rims ???
@C6MSX
3 жыл бұрын
Hey man, I got them from Facebook used!
@tyronedelgado3474
3 жыл бұрын
@@C6MSX but you don’t know the brand or were I can found it???
@tyronedelgado3474
3 жыл бұрын
@@C6MSX they looks like a Vensa
@C6MSX
3 жыл бұрын
@@tyronedelgado3474 what’s Vensa mate?
@C6MSX
3 жыл бұрын
@@tyronedelgado3474 These are 19” Audi Rotor Alloys friend, the same wheels that come on the RS3 and various black edition audis have the same style wheel, different fitment, hope this helps!
@Luk1000slowracer
3 жыл бұрын
I'm thinking of buying one, please more videos
@C6MSX
3 жыл бұрын
Hey man sure! What do you want to see?
@BR4DMAN
3 жыл бұрын
Sounds ace, what fitting did you need to join the milltek to the trackslag? or does the fitting supplied with the milltek catback do the job?
@C6MSX
3 жыл бұрын
Thanks mate! I took it to my local exhaust shop to weld a slight reducer on it to make it fit 👍🏽
@BARZERKAZ
3 жыл бұрын
This sounds absolutely menacing. I have a 2.0TSI A3 K03 turbo. Do you think a trackslag downpipe, resonated with a back box delete will sound nice or too much? I want it to be LOUD. I like the idea of having no backbox as I like mine loudish all the time.
@C6MSX
3 жыл бұрын
Hey dude thanks! I think you're right, you can go straight through but a resonator is needed, this was res delete with a stock backbox and it sounded farty and not nice as the backbox couldn't handle the increased flow, So after this I swapped my stock res delete catback for a milltek nonres, sounds much better now. I will have to grab some videos but I need to get someone else to record it or drive haha.
@BARZERKAZ
3 жыл бұрын
@@C6MSX Thanks for the reply, loving the fitment also, sits lovely! Are you on the gram bro? Yeah some more videos would be great, I've not purchased mine just yet!
@C6MSX
3 жыл бұрын
Yeah man sorry for the late reply, I’m on Instagram under @thatblacksportback for more photos! Thanks again 🙏🏽
@C6MSX
3 жыл бұрын
Also I’m thinking about jumping into this video stuff but i don’t know the first thing about doing it! I think I’ll watch some videos on how to edit and record and give it a go.
@jamesc_s3
3 жыл бұрын
Got a milltek sport cat downpipe, I was going for the Trackslag cat back but now I've heard it I'm leaning towards a Cobra cat back as they get good reviews.
@C6MSX
3 жыл бұрын
Hey man, it’s all relative really, the price tradeoff and the noise you prefer, there are small gains to be made from the Cobra but i think you only see that higher up the power scale. Either way they’re both good setups man, you could give yourself a bit more power with a decat as well
@thiashennaik5154
3 жыл бұрын
Hi bro..was it in raspy or to noisy? I had an Mk5 gti and did a decat and res del and it was way to raspy and tin like. I was hoping with the s3 being a different engine and k04 turbo, it will sound much nicer with a decat and res delete. And did you lose power or did it remain the same?
@C6MSX
3 жыл бұрын
Hey man! Yeah it was disgusting hahaha, invest in a decent Catback otherwise it sounds like you’ve disconnected the exhaust from the flange. It felt flatter going through the Rev range whereas now it has a bit more back pressure you feel more of a surge.
Пікірлер