A 5/16 drill bit works well to remove the old clips. Gently drill the clip and it will spin right out! It doesn't damage the clip either. I only got 5 clips with my step and had to use one of the old ones.
@JPIERCE80Sbby
2 ай бұрын
The middle of the new mirrors not made like the original and don't pop in
@ktthomas7714
3 ай бұрын
Those heated mirrors burn up all the time...i had one get color- distorted on my 2005 corvette...so i ordered a mirror overlay and stuck it on...the heated part doesn't work anyway and i didn't have the built-in turn signal anyway...just some ideas for someone who doesn't have to replace the whole mirror ...blessings be upon us all
@steveloux4709
4 ай бұрын
It's worth mentioning that in addition to the heat and turn signal circuits, the third pair of wires visible in this video serves the electrochromatic function which "dims" the mirror during hours of darkness.
@evanwinters31
6 ай бұрын
My mirror is not popping in
@KyleBuilds
Ай бұрын
Had same issue got so irritated that it broke
@roberttheriault5166
6 ай бұрын
Good job thank you Mr.
@user-ng9jj4gz5v
8 ай бұрын
Excellent video…lost step pad to car wash after 7 years, was going to take it to shop. Your video showed how easy this is, so I plan to save cash and do it myself. Thanks!
@jesusadam62
10 ай бұрын
Thanks quick and simple straight to the point 💯👍
@michaelfuller2378
11 ай бұрын
Good job!
@Lathe-Lizard
Жыл бұрын
Lol I wouldn’t “fix” it that way.
@Shanonmcnab576
5 ай бұрын
How would you fix it?
@michaelmccrimmon
Жыл бұрын
Well done! Thanks!
@alejandrorangel6588
Жыл бұрын
Morning bro and thank you. Question can I just replace the light bulb on the arrow. ??
@wilsonburgess432
Жыл бұрын
That’s why I’m here, just orders new mirror and want to change the bulb before placing the em in.
@marcoarreazola7906
Жыл бұрын
You saved my money , rhanks a lot ,broth
@ronthompson5702
Жыл бұрын
Thanks for the tip brother! I just got my 2500HD out of the body shop... They replaced the bumpers of the brackets but of course has body will do... It's the details that that matter I figured that was the culprit but had not been under yet... Good to have confirmation. Thank you for your efforts!
@ronaldedwards2465
Жыл бұрын
Thats jacked up😂
@ChevyARt15
Жыл бұрын
I like the idea, bottle jack on floor jack.
@michaelmccoy2621
Жыл бұрын
Great video really helpful
@flyurway
Жыл бұрын
Don't suppose it ever occurred to you to just loosen the 3 bolts on those brackets and just readjust it rather than trying to bend them?
@lizard944
Жыл бұрын
Doing things by the service manual. What fun would that be?
@ALiEIV
Жыл бұрын
Well don’t you suppose that he made this video because he has already tried that and it wouldn’t work, so in turn, he made this video
@brewerbi
Жыл бұрын
Wow Well done
@miguelrios5870
Жыл бұрын
Where can I buy 1 like it?
@mojogartor25
Жыл бұрын
Great video thanks!
@isleta521a
Жыл бұрын
Thanks for your time to make this vid. There's two bolts on each end of that bumper arm that if loosened (on my truck, they weren't tight) , may give you a mm or more to tighten that gap which I tightened under pressure.
@DarleneRennie
Жыл бұрын
Dang while trying to get old pegs out one dropped right inside my nerf bar .. any suggestions?
@suvandtruckaccessories7528
Жыл бұрын
i don't have a remedy for that one.
@MikeMaldonado
10 ай бұрын
Can’t you just leave it in there?
@joeyseabaugh6742
Жыл бұрын
Too bad they don’t make a heavy duty pad that you can actually step on in sun freezing weather. They tend to shatter very easily
@markdrake2715
Жыл бұрын
Nicely done.
@eileenheitman4351
Жыл бұрын
Beautiful truck! How much lift?who’s kit? Tire size? Just bought a 05 zZ71 Dave in omaha
@suvandtruckaccessories7528
Жыл бұрын
Thank your for the compliment! It came like you see it. I believe its a 3 inch lift. Im not sure on the brand. The tires are 285-70-17. Cheers!
@joyfamily2413
Жыл бұрын
Good example! My replacement pad, the plastic pins were slightly misaligned. Caused a slight ripple in the appearance. Oh well.....
@frekkledipped
Жыл бұрын
when pulling out the old insert I would put in a screw not all the way and pull it out I would also put like silicone RTV or something else under the pad. I would do it all around the outer part try to keep the water out. My bar has alot of water in it or had I drilled a holei n the bottom. Harder to remove later but if you put it around the outside its easy to cut. Mine are 10 years old need replacing still looking or the right ones. Nice vid thanks
@babeonboard6
Жыл бұрын
Thank you!
@clydeespinosa6286
Жыл бұрын
Thanks man those don’t last too long in the New Mexico sun. Your video helped me out on my weekend project
@Wrench7532
Жыл бұрын
Thanks for the great idea on how to fix. Strait to the point.
@Wrench7532
Жыл бұрын
Thank you for a straight forward and quick to the point video well done 👏
@Bama1963
Жыл бұрын
Thanks, I’ll be replacing mine soon on my 05 Silverado.
@cletheilman2778
Жыл бұрын
great video sir!
@kash4072
Жыл бұрын
Good job
@t.j.h2810
2 жыл бұрын
Man, that's great info and a very good shot of where to place the jack. Thanks !
@chrisrector7903
2 жыл бұрын
Easy to understand. Quick and to the point. Very well done video. A+
@danielochoa831
2 жыл бұрын
will these work on stock bars on an 08 extended cab..??
@suvandtruckaccessories7528
Жыл бұрын
I think you will need to know the exact step bar model that is installed on your truck to ensure that you purchase the right replacement pad.
Пікірлер