Nice build. I’m doing similar swap into a Jeep. What size turbo/model did you end up using?
@therallyguy1
6 ай бұрын
What is this slice of steel round stock pictured in your hand at 1:39? It's has many groves cut into its face giving it the resemblances of a clock face
@nissannation
6 ай бұрын
That’s the weighted fuel pickup for in the fuel tank. It sits on the bottom of tank
@conradnear4068
7 ай бұрын
Is the factory gm ecu and engine harness still there or how did you keep the gauges working and the bcm stuff functioning?
@dylananez6936
8 ай бұрын
Plz make more videos on this truck !
@dylananez6936
9 ай бұрын
Hey man sell this truck to me I live in Canada
@nissannation
9 ай бұрын
Make me an offer
@dylananez6936
9 ай бұрын
@@nissannation I know there is A LOT of time and money in that truck from what I seen I wouldn’t even know where to start on a price range tbh .. but throw a number at me plz !
@dylananez6936
9 ай бұрын
I’d trade my civic typeR plus cash for it or if you want just straight cash we can do that too if it’s not something crazy crazy
@nissannation
9 ай бұрын
Well after it rolled over 40,000km on the kubota engine, I sold my new truck and it is now my daily driver. I dont really want to sell it but thank you for the interest!!
@nissannation
9 ай бұрын
I am currently working on a 9sec 8th gen civic. Caged, awd, 1000hp.
@sdrexpressllcsdrexpressllc2838
9 ай бұрын
Grate job guys!
@markm0000
Жыл бұрын
Sweet 👌
@hunterswiski8398
Жыл бұрын
This is really cool man could you make more videos on it?
@stevegaspar4089
Жыл бұрын
3:49
@stevegaspar4089
Жыл бұрын
3:39
@stevegaspar4089
Жыл бұрын
3:24
@stevegaspar4089
Жыл бұрын
0:05
@Justintimegarage
Жыл бұрын
Could you make a video going over the wiring on keeping the factory gauges and transmission working with it? I have 2010 gmc 1500 with a 5.3 and want to put a Cummins in it! Thanks
@Justintimegarage
Жыл бұрын
Also how to get the fly by wire pedal to work
@xlisajade
Жыл бұрын
How much for the truck?
@2ndMomentumGarage
Жыл бұрын
Does your machinist still have the files to duplicate the accessory brackets and bell housing adapter bracket?
@BradenBuildz
Жыл бұрын
Awesome job. Hope to get on this level some day.
@nissannation
Жыл бұрын
Thanks Man. Appreciate the comment :)
@c.i.m.1600
Жыл бұрын
👍👍
@tim_t777
Жыл бұрын
Is the truck forsale if not how much would you charge for the same swap ?
@nissannation
Жыл бұрын
I suppose that everything is for sale for the right price? :) it’s my daily driver so I wasn’t really planning on it. It was a very time consuming project and I wouldn’t be interested in doing it again.
@PoptropicaMs123
Жыл бұрын
I’ve got an engine same as yours with the ecu but no wiring harness. From a 2015 Yale forklift. Did you have a harness that you modified or start one from scratch? Thanks
@nissannation
Жыл бұрын
Made a harness from scratch. The hardest part was sourcing all of the connectors. The biggest was the 2 ecu plugs, found them on Alibaba I believe.
@WJCTechyman
Жыл бұрын
I wonder what the Kubota dealer thought of this mod? I wish I had the time, money, knowledge and patience to do something like this.
@nissannation
Жыл бұрын
I was a mechanic at the kubota dealership for 11 years:) they were very supportive of me doing it after hours in the shop. Took 1 year to make the engine and electronics work together, and another 4 months to mate the transmission and accessories. Over 30,000 km without issue, and 0ver 30mpg
@WJCTechyman
Жыл бұрын
@@nissannation Nice. Better than the old engine, I would think, it probably increases resale value too...now if Diesel fuel could drop in price.
@HRTBRKD0G
Жыл бұрын
Considering doing a Kubota into a S10. Or first gen tundra what will be the best fit for that vehicle?
@theman68and1
Жыл бұрын
This man has single handily made a gm reliable
@littledeel
Жыл бұрын
I don’t get it… gm vehicles are typically pretty reliable in general.
@WJCTechyman
Жыл бұрын
@@littledeel Until GM skimps on working ignition switches and kills a baker's dozen of people. I would rather have a Ford. Too bad Honda or Toyota doesn't make utility vans and trucks. EDIT: Toyota makes trucks, almost forgot about that.
@codyschultz2507
Жыл бұрын
That hurts since it’s true for the last 10+ years. Bout to break and buy a Tundra. Take it back to my high school years and my 85.5’ Supra! Don’t tell anyone, but she was 1 and 0 in the highest of stakes racing… So was my 84 GTI. Bwahaha Pps my tadpole count has plummeted since those day.
@grc8242
Жыл бұрын
It's sad really
@Heatherder
Жыл бұрын
@@WJCTechymanimagine still talking about that stupid scam of a lawsuit because you consoom muh media stories like the dumb boomer cattle you are
@justinm1506
2 жыл бұрын
I have the just newer model v3800 common rail. How did you do the wiring?
@nissannation
2 жыл бұрын
What year of engine is it? Where did it come from? I built my own harness from scratch.
@mr.nobody68
2 жыл бұрын
Looks like it was a real pain in the cunt swapping that in there
@nissannation
Жыл бұрын
It took a bit of work yup
@ntsoylu
2 жыл бұрын
Awesome guys
@tarasdrozd
2 жыл бұрын
Nice photos, Tim Hortons coffee, drive by Kubota dealer, and even turned the truck off at the end, what a beauty Great video!
@taylor2105
2 жыл бұрын
I wish Toyota would build a truck with an engine like this. Nothing fancy needed. Just cheap and reliable to run
@Bmr4ten
2 жыл бұрын
They do.....
@taylor2105
2 жыл бұрын
@@Bmr4ten but.... I can't get it..
@WJCTechyman
Жыл бұрын
Cheap to run...can't say that about the price of Diesel fuel, currently. In my community it's still CA$2/L or above, or not available at fuel stations.
@jesses1589
Жыл бұрын
The problems all come from government regulations so you've got to do it yourself.
@_P0tat07_
2 жыл бұрын
Very nice!
@BlackRedsPlaneSpottingChannel
2 жыл бұрын
UNIQUE pickup engine swap, NICE!! (I also got a GMC Sierra 4 door, 2012, and is white.)
@zeitlerusmc
2 жыл бұрын
Outstanding work man. Just finished a 2203 in my 48 Willy’s
@adriangospodaru9733
2 жыл бұрын
More reliable than the chevy powertrain :))))))
@frios011
2 жыл бұрын
That is BADASS!
@nissannation
2 жыл бұрын
It’s been a while now since I built it. But I have been driving it daily, approx 20,000km so far, with no hiccups. Getting over 30mph now on highway, 25 in town
@johnsipes4422
2 жыл бұрын
Mph or mpg? I assume mpg but just curious
@nissannation
2 жыл бұрын
Mph:) the engine rev limit is 3000rpm so top speed is 140kph
@johnsipes4422
2 жыл бұрын
@@nissannation oh wow. Ok I didn’t expect that haha. That’s a cool build regardless. It would be cool to see you do a rear end swap for higher speed or something like that.
@nissannation
2 жыл бұрын
Flying Saskatchewan 1 second ago It’s currently only 70hp with 205-215ft/lbs torque… so it wouldn’t have the power to go any faster . I need to find something or someone that can tune a Kubota (Denso) ecu
@johnsipes4422
2 жыл бұрын
@@nissannation ah ok.
@coryquinn7225
2 жыл бұрын
Please do a more in-depth video, Awesome build
@nissannation
2 жыл бұрын
That post was supposed to be a reply, thank you Cory for the compliment 👍👍
@skyraiderjet
2 жыл бұрын
@@nissannation What transmission is that? 4l80E? Did you get a low stall converter?
@josephgraziano9144
3 жыл бұрын
How many hp and torque you putting down thinking of building a Kubota engine
@johnsipes4422
2 жыл бұрын
Description says 70hp 200lb/ft
@WARD5KUSTOMZ
3 жыл бұрын
I like it! Thinking about the F5802 in my F150
@maxpat82
3 жыл бұрын
Lot of work for those low number. A bit like Shifted Interest from ontario with his kubota powered Ranger Nice work none the less!!
@nissannation
3 жыл бұрын
Thank you. 70hp is just the stock ecu program. We will bump it up a little more in time, but the main goal of this project is to have a full size truck with a kubota engine that gets 30mpg+ and does highway speeds.
@dreece2000
2 жыл бұрын
Man that really is some quality work, Is it getting 30 mpg and will it do highway speeds. Did you go with a lower stall converter. As the stall on that tmbx converter a little high. I cant think of the code that uses a 1100-1300. Been wanting to do the same thing except to use a mercedes/dodge sprinter drivetrain.
@red666A
5 жыл бұрын
Good work check out my 240sx.
@Skidmarkmotorworks
7 жыл бұрын
I'm attempting to do the same swap on my drift car and would like to see more on the motor and trans mounts !
@bonifaciomendez5891
9 жыл бұрын
Bro one question is the ka24de-t pushing more hp than the vg30ett or do you feel is it better to have the ka24de-t than vg30ett
@LEterribleONE
11 жыл бұрын
Damn shame this probably never got finished.....
@rydazim
12 жыл бұрын
How do you like that intake manifold?
@LEterribleONE
12 жыл бұрын
Owner must have died or went back in time before youtube with his fc..... Rippers are manlaw after you build something like that and post it on the internet.
@LEterribleONE
12 жыл бұрын
The timing marks are about dead center lined up with the top of the head. U can use a square and line em up. I got lazy and took my gears back off and put the rear timing cover back on. lol. Seemed easier.
@jameswoodsist
12 жыл бұрын
@ImRichRu BECAUSE RACECAR!!!!!!
@A2J_Tim
12 жыл бұрын
bring it out to castrol race way, would love to run you with my 2j powered fc.
@boardinrider
12 жыл бұрын
lololololololol
@SublimeSati
13 жыл бұрын
Great song and great car.... peace out, love in God bless bro
@nissan240driver
13 жыл бұрын
@mrZdude thank you, do you know anything about the swap into s13? i cant figure out what mounts to use i heard j30?
Пікірлер