Salut my friend super car super video subscribe subscribe .....
@mohd.ramzirahimih6518
2 ай бұрын
Thanks! I will share new videos in the near future.. been busy lately with non RC stuff.. a lot of contents coming up.. haven't uploaded them..
@aryan42162
3 ай бұрын
Does the counter rotating gearbox eliminate torque twist?
@DIAZDIAZ2672
3 ай бұрын
Hello, could you tell me how I can search for tires for this type of 1/16 model…thanks in advance
@viko207
5 ай бұрын
Looks like they changed it up a little bit, the 2 gears you hold at 0:57 are molded as one gear on mine. Also the plastic is not as white as seen on video, its a lot more yellow-ish. Maybe they saw that as a weakspot and fixed it.Quite impressive.
@ariefyuli3303
5 ай бұрын
Great vids, i still waiting for your next c54-1 tips or trick vids.
@skullcrusher8581
6 ай бұрын
What motor did you put in it? It doesnt look like stock one. Thanks.
@mohd.ramzirahimih6518
6 ай бұрын
Its a 370 motor thats usually used on the wpl 2speed gearbox.. any 370 will fit in that gearbox.. it increases the control and torque of the car.. the stock motor just wont cut it. With the 370 motor, it will crawl better.
@skullcrusher8581
6 ай бұрын
@@mohd.ramzirahimih6518 Thank you . Good video and review.
@reylenzaaa
7 ай бұрын
keren bang, punya gw masi dalam proses perbaikan soalnya gearnya pecah
@anthonyaviles8665
7 ай бұрын
What motor are you using have any links to it
@mohd.ramzirahimih6518
7 ай бұрын
Any 370 motor would do.. the one i have here is something that i found in my toolbox of parts.. so i dont exactly remember where i got them.
@anthonyaviles8665
7 ай бұрын
Their new update to the gear box has changed that the gear has a additional shaft to it
@CustomRcGarage
8 ай бұрын
Wpl always looks good 👍
@WildCaptures
8 ай бұрын
This is a great fix! Have you ever repaired the stock plastic wheel hexes this way? My C24 rear hex is slipping on the axle. Do you have a link to the 370 motor you used on your C54-1? 👍
@mohd.ramzirahimih6518
8 ай бұрын
Yes.. that is also an easy fix.. kept the wheel screwed on the hex and pull it with the loosen hex.. put a dab of super glue and let it cure for 15 minutes and you're good to go..
@bang_wahid_qubeat_hamra
8 ай бұрын
Hi uncle, my name is Wahid, I'm from Singapore, thank you for the tutorial, I just added gluing with super glue to each gear iron rod so it's strong enough to climb 40 degrees.
@mohd.ramzirahimih6518
8 ай бұрын
This probably quite a late reply.. haha.. been busy lately with non RC stuff.. but im glad my repairing method works. I will post more videos in the future.. stay tuned!
@user-pt5pf5lj3h
10 ай бұрын
开头那顽皮龙C24用的什么电机呢,真的猛,我现在用无刷5600kv
@Wild_Buggy
11 ай бұрын
Thanks for the tip! I have the same problem and was considering replacing the stock gearbox with the 2-speed gearbox, but I will try your idea first!
@mohd.ramzirahimih6518
8 ай бұрын
I still used the stock gearbox even after 6 months.. but i jusy swapped it with the C34 gearbox and put the C54 gearbox on my C24.. i love that gearbox especially with a 370 motor.
@Wild_Buggy
11 ай бұрын
👍👍👍
@gjw35057
11 ай бұрын
Hey mate what brand wheels and tyres are you running they look sweet .. 👌
@mohd.ramzirahimih6518
11 ай бұрын
They're wpl C34 wheels.. i painted the mid section in chrome.. tires are B36 kit tires
@NXCboards
Жыл бұрын
What motor in it ?
@mohd.ramzirahimih6518
Жыл бұрын
A high torque 370 motor from a metal single speed gearbox.. ones with the blue butt.. i love the smooth crawl with that motor
@King-Bob-on-the-Rocks
Жыл бұрын
Nice men, i Love to See it shacking 😉 i am searching for a big Rig but i think 1/10 is to big for my Backpack. And 1/24 has to much Trouble at the trail. Did U Hit the trail with IT Kind regards Thomas
@mohd.ramzirahimih6518
Жыл бұрын
Yeah.. the stock shocks with shorten springs gave this truck that nice scale shaking effects on the body. I love seeing the body moves around on uneven surfaces and yes, i always bring this truck on the trails more than my 1/10 Axials since i love going around places and needed something that is not too big or small. This C54 fits right in between.
@mohdmirza1228
Жыл бұрын
Hi def!
@RCManiacs
Жыл бұрын
Looks great 👍🏼
@mohd.ramzirahimih6518
Жыл бұрын
The crawl is good but not good enough.. the gearbox is probably a perfect ratio for portal axles.. im probably gonna swap it with C34 gearbox with custom ratio.
@fwfefrtefdv4719
Жыл бұрын
Hi, may check the front wheels loose when use finger to move them? There are a small gap, is it normal?
@mohd.ramzirahimih6518
Жыл бұрын
This is the stock axles.. and yes, they had a lot of play on the front inner knuckles that connects the dogbone joint but it works just fine and doesn't effect the performance. The only way to solve the wobbling problem is by upgrading the front knuckles to aluminium knuckles and metal universal joints. But i will make a video about some upgrade for this guy in the future that includes installing an upgraded knuckles and universal joint.
@fwfefrtefdv4719
Жыл бұрын
@@mohd.ramzirahimih6518 Thanks for your reply! Will look forward to your next video share!
@Papa_Shorty
Жыл бұрын
I’m glad I caught this channel while it still new. Less content to catch up on.
@mohd.ramzirahimih6518
Жыл бұрын
Ive had my YT channel for quite some time.. but never had the time to do any contents.. but now i am definitely gonna share my knowledge and works process.. of course i will improve my videos over time.. ive already shot tons of videos for contents and probably gonna upload at least once a week.. lots of videos but haven't edited and upload the rest.. so stay tune.. cheers!
@Papa_Shorty
Жыл бұрын
I have a RBR/C flat bottom 2 speed metal transmission. I wonder if it will fit without mods.
@mohd.ramzirahimih6518
Жыл бұрын
Since the dimension is almost the same as the C34 gearbox, i think it will fit nicely.. ive sold mine few months ago so i couldn't test or make some comparison out of it.. but i intended on swapping the stock gearbox to the C34 gearbox.. but i will cover that in my HOW TO video series..
@EdwardChew
Жыл бұрын
Hoho way better video quality ah hahaha
@mohd.ramzirahimih6518
Жыл бұрын
Definitely miles difference than previous one.. now i can capture things in detail..
@TapakBand
Жыл бұрын
I think i must buy,...😢😢😢 Nice unboxig auto sub
@EdwardChew
Жыл бұрын
Sexy voice
@mohdmirza1228
Жыл бұрын
Handy!
@johnalexanderayudan9229
Жыл бұрын
This one really helpful thank you for those idea bro😊
@mohd.ramzirahimih6518
Жыл бұрын
Thanks! This also applicable on your wpl axle gear.. Instead of using superglue, you use red threadlock..
@johnalexanderayudan9229
Жыл бұрын
Very informative bro keep it up 🎉❤
@mohd.ramzirahimih6518
Жыл бұрын
Thanks man..
@mohdmirza1228
Жыл бұрын
This RC definitely worth every penny
@jpak1130
Жыл бұрын
I should have got the "yellow". That is a cool tan color. Looks good. The red one does pop though.
@mohd.ramzirahimih6518
Жыл бұрын
Yeah.. I love the "yellow" version.. Nice tan color.. Actually looked even better in person!
@stevemorgann
Жыл бұрын
It this 180 moter?
@mohd.ramzirahimih6518
Жыл бұрын
The new C54 rtr version had a new 280 motor specific only for this truck.. Even the gearbox is new..
@abrahamjimmy7559
Жыл бұрын
😮😮.. ni kli lh kwn sia.. bh ada bidio tuk crawler dy khh😅😅😅
@mohd.ramzirahimih6518
Жыл бұрын
Otw.. Haha..
@mohdmirza1228
Жыл бұрын
Sweet! How much for this bad boy?
@mohd.ramzirahimih6518
Жыл бұрын
It's around under $50..
@mohdmirza1228
Жыл бұрын
That is cheap af
@SuperBEE911
Жыл бұрын
😢 but this is not 1:10 scale
@mohd.ramzirahimih6518
Жыл бұрын
Sadly it is not.. But hey, at least its an all new chassis..
@morrisrc
Жыл бұрын
Nice bro! Hows the gearbox? Can you compare the performance from existing gearbox for wpl and mn.
@mohd.ramzirahimih6518
Жыл бұрын
The ratio is better than one's on MN99s from what I see because I once own it a year ago but sold it off.. But in terms of performance, definitely this new gearbox is better since it almost has no torque twist at all.. But I will cover the other details on my next video that will be uploaded tonight or tomorrow.. The nex video will cover a more thorough review, comparison and running video.
@morrisrc
Жыл бұрын
@@mohd.ramzirahimih6518 thanks bro, will wait for the next video 🙂
@RCManiacs
Жыл бұрын
Nice and informative video, keep it up 👍🏼
@mohd.ramzirahimih6518
Жыл бұрын
Thanks! Gonna improve my videos on each upload.
@kennyharnesstaas8891
Жыл бұрын
Mantap bro.
@mohd.ramzirahimih6518
Жыл бұрын
Next video baru full review + running video.. Haha..
@johnalexanderayudan9229
Жыл бұрын
I love the painted suspension bro and the chassis as well🤩🤩🤩
@mohd.ramzirahimih6518
Жыл бұрын
A more thorough review will be up in few days. I'll talk about more about it..
Пікірлер