I thought you were playing about putting it in the oven lol
@anthonywhite9443
22 күн бұрын
Update: It worked for like a week. Then stopped working
@adrianosuna2739
Ай бұрын
Bro is actually works 😂 just tried it
@ricka0917
2 ай бұрын
So just curious if the clock is flickering, is it worth it to check the fuses first?
@joedevoe7097
2 ай бұрын
Worked for an hr then stopped again. Honestly I don't think this is the problem c. It just works sometimes from taking it out and in
@joedevoe7097
2 ай бұрын
200 is not hot enough to melt solder
@haloosee-nation2231
2 ай бұрын
I was surprised this worked considering I had to use my barbecue because my oven was in use. Thanks for the help
@jamesmilamjr7025
2 ай бұрын
You need to disassemble it all the way down to the chip board and put it in the oven 375 degrees for 6-7 minutes and it will work. Take it all the way apart. The plastic on the cd player will melt. 375 degrees for 6-7 minutes REALLY DOES WORK!!!
@brayke7647
3 ай бұрын
I did it at 385 for 10-15 minutes two different times and it works at first but then after like a day it goes back to broken again. Weird
@chemy182000
3 ай бұрын
Thanks a lot the oven thing work with mine
@atrufriend2u
3 ай бұрын
Did it work??? How did you go through all that and not show us if the radio is working.
@trinidadtorres6973
3 ай бұрын
I really worked thanks
@user-by3ie1be9p
4 ай бұрын
My radio hasn't worked for about 2 years now in my 2014 F150. The video was very helpful, thank you. I did try this method last night but unfortunately it did not work.
@jusscap3854
5 ай бұрын
I have a 2011 f150 and only have 3 volts going to the radio and I tried the fuses but does anyone know if it would be anything else
@kingclarity2377
5 ай бұрын
I have a method that works, but you have to do it after checking the fuses.. if that doesn’t work, you’ll be frustrated enough because you don’t know what’s wrong, take your fist and hit the media center near the USB port. Radio cut right back on for me and hasn’t cut off since.. may take a couple hits
@jt2112able
5 ай бұрын
I've done this with success but recommend NOT baking your cd player if you want that to work...the circuit board can be removed from the frame/cage. Bake only the circuit board!!!
@The_Active_Region
5 ай бұрын
Resolder by hand Q201. It is a 8 pin IC or transistor pack. Heating in the oven trying to reflow lead free solder without flux on the board is pointless. It may work but not for long. You also risk further damage to the board and or connectors. The only way to reflow the board properly is to get it hot enough that it may melt or deform those connectors. The connectors are most likely added on after the main board is produced in another machine that wave solders them on. Also there is components on the the bottom side of the board that can fall off during the reflow if it is moved before cooled.
@noramennitt4562
5 ай бұрын
20 minutes at 200 degrees worked for me
@anthonywhite9443
6 ай бұрын
This worked!! I thought everyone who commented was just making shit up and going along with the joke. Turns out I was wrong. I seriously can't believe this worked. I don't know how or why but it fixed the radio and Bluetooth issues I was having
@Stewartmotorsgarage
6 ай бұрын
Awesome!
@josetierra8504
6 ай бұрын
It work thanks brother! I didn’t have the money for new radio at the moment!
@josetierra8504
6 ай бұрын
Thanks!
@lisastreminski4045
6 ай бұрын
The radio in my 2013 Ford F150 quit working about 3 years ago. I’m off for the holidays so I decided to be froggy and try this. I didn’t have any faith that this would work but what did I have to lose? To my amazement, it fixed everything. I was able to set my clock, listen to the radio, and sync my phone!! I’m pretty sure it ruined my CD player because parts melted but who uses a CD player anymore 🤷🏼♀️. Wow!!! Great video.
@anthonychapman7114
6 ай бұрын
Another waste of time, I'm calling bs on all you shadetree mechanics that don't your ass from a gopher hole.
@nonamesixx
7 ай бұрын
honestly didn't think it'd work, did 15 min 200 and 10 min 300. only problems was that the plastic on the front where the cd player is located got messed up so I took it off, it also didn't actually work at first and the cd player kept spinning but stopped and then the radio came on. Nice 🫡, nvm stopped working again 😐
@82raptor
7 ай бұрын
You lost me at wire brush! If you do this hit the board with electrical contact cleaner or compressed air. Showing us where the bad connection is would be nice to see so I can re solder it not put it in the oven and risk damage to other parts. I had a similar problem with my 25 year old home unit and cleaning it out worked just fine.
@samsungcore3185
7 ай бұрын
Me tienen arto los comerciales😡🤬
@RoloAtWerk
7 ай бұрын
Another success history over here! I bought a 2012 F150 with radio doing the blink thing on the dash. Following previous comments, First I’ve removed CD stuff - ribbon included - and then baked for 15 minutes at 200 F (100 Celsius) and inmediately just to be sure another 7 minutes at 300 F (150 Celsius). Works just fine!! Thanks a lot!! Greeting from Chile!
@memolucy
7 ай бұрын
Realmente te funcionó? @RoloAtWerk comentar algunos detalle para hacerlo, tengo una f150 2014 que no le funciona el radio, el reloj parpadea. Me funcionará este proceso? A ti te funcionó?
@RoloAtWerk
6 ай бұрын
@@memolucy así es, funciona!
@gisellemena1750
8 ай бұрын
Omgggggggg literally just saved me 300😭😭🤍🤍🤍🤍🤍
@Stewartmotorsgarage
8 ай бұрын
I got you🫡
@sassyshea1914
9 ай бұрын
I just took mine out but I had a 4th one on back
@MrBenzzz190
9 ай бұрын
It worked for me in the oven at 385 for 10 minutes. I turned the oven off and opened the door until it cooled before I removed it.
@masterlee4370
9 ай бұрын
I changed my battery on my ford f-150 2012 model and now the radio and clock do not work. Screen displays "Built Ford Tough" Everything else works fine.
@ArthurSperotto
9 ай бұрын
THANK YOU!! This worked!
@MatrxBstr
10 ай бұрын
What about preheating the oven? I assume oven was preheated before putting it in? Also, it should sit with our movements during cool down, yes?
@MatrxBstr
10 ай бұрын
Welllll… it didn’t work for me. Tried it in preheated oven of 200 for 15min. 2nd attempt 250 for 15min.
@billhegner9878
10 ай бұрын
Do I have to put radio all back together before trying to see if it works
@Stewartmotorsgarage
10 ай бұрын
Yeah did you get it workin?
@billhegner9878
10 ай бұрын
How long before u can put it back in after the bake?
@Stewartmotorsgarage
10 ай бұрын
I would snap it back in when its cooled down
@billhegner9878
10 ай бұрын
I’m going to try it and hopefully it works
@Stewartmotorsgarage
10 ай бұрын
@@billhegner9878 if not, you can always try a little bit longer in the oven
@billhegner9878
10 ай бұрын
@@Stewartmotorsgarage sounds good I’ll let you know if it works
@billhegner9878
10 ай бұрын
@@Stewartmotorsgaragewhat should I put the radio on when I put it in the oven?
@SteveParton
10 ай бұрын
@tunanocrust302 I wonder if a heat gun would accomplish the same thing? If the point is to heat up that connection, it seems like a heat gun would work. Thoughts?
@SirSmokesAlott
8 ай бұрын
it will, it's most likely the main chip on the board that's causing this issue, happens to lots of other radios as well. blast that with a heat gun at a decent temp without melting everything and it should be good. i've done it on my kenwood, will be trying it on this ford radio later.
@mr_jake.y8348
10 ай бұрын
My raido is working but the screen turns off after a while. Can you help?
@albertatrucker332
10 ай бұрын
Works 💯 but had to heat it at 250 for 15 for it to work
@nmrobinson7806
11 ай бұрын
Did exactly what you said. Worked for 2 minutes then stopped working again.
@Stewartmotorsgarage
11 ай бұрын
Maybe put it in oven for longer and then try it? Youll get it!
@symtex36
11 ай бұрын
But your radio display wasn't flashing before you took it apart.
@VALERIAA210
11 ай бұрын
In my f150, fuse 28 (radio muting) has no power I changed the fuse and still no power. I have no sound and blinking display
@yologravy1755
11 ай бұрын
I have a 2013 f150 single cab . I got an amp set up and I’m wondering which colors are the front speakers. I have to hook up a line output converter for my stock radio
@ryanyarnell1
11 ай бұрын
I've been beating my and getting it to come back on haha. Gonna try this for sure!
@Marvelous3215
Жыл бұрын
Will it not work if I don’t take it apart ?? I mean could I technically just pull it out and pop it in the oven without taking the sides off ?? lol
@Stewartmotorsgarage
Жыл бұрын
It should work if you just stick it in there
@assult537
Жыл бұрын
Good tips, I baked a little higher, 175 for ten mins then 375 for 6 and it worked!!
@assult537
Жыл бұрын
Unfortunately it only worked for like a day and then it broke again :( I tried rebaking it to no avail.
@cmasters1474
10 ай бұрын
@@assult537im in the same situation.. have you figured it out yet?
@jasondorst13
Жыл бұрын
Did this a couple days ago. Thank you for the tip. I did 15 minutes at 200 degrees and then ramped up to 300 degrees for 10 minutes. Worked like a charm!
@danielmcdougle6925
11 ай бұрын
I tried the 200 for 15 mins he recommended but it didn't work so I tried this. 200 for 15 mins with 10 mins at 300 after. Works perfectly now 👍
@billhegner9878
10 ай бұрын
@@danielmcdougle6925hey did u do the 300 right away ?
@danielmcdougle6925
10 ай бұрын
@billhegner9878 right after the 15 mins at 200 I turned the temp up to 300 for 10 more minutes.
@paddyslawnandleaf2631
Жыл бұрын
The radio in my 2011 f150 quit 5 years ago. Just came across this video and tried it. Radio now works including Bluetooth but no CD. I had the oven too hot. 200 F is actually hot enough. Thank you
@hotpursuit58
Жыл бұрын
What kind of seasoning did you use? Lol Going to try this tomorrow, with all the positive feedback I feel a little more confident in this fix Great video
@mfmonthefmf
Жыл бұрын
will this work if I have the sync version? Also my F150 is the platinum with center console, assuming same procedure?
Пікірлер