For people who don't get tunes or already have tunes but no deletes, you can buy resistors
@fewminutestudio959
Жыл бұрын
Yes a resistor will work as you said but you can do this without a tune. Just leave it plugged in and tuck it out of the way. No light or anything and will be deleted out of system.
@glendekoker3682
Жыл бұрын
I have one great for off road
@Super_SonicR1
2 жыл бұрын
There’s something wrong with my Audi TT after it warms up if I get to high rpm it looses power and then if I shift it’s all good again and does it every now and the
@Super_SonicR1
2 жыл бұрын
Almost like a sputter don’t know the issue changed the spark plugs and that’s it
@Super_SonicR1
2 жыл бұрын
Literally the best video out there yet that explains where the hoses go thank god
@dragos7886
2 жыл бұрын
thank you very exploratory accurate.could you tell me please the size of silicone hoses how much it is?4mm or 8mm?
@fewminutestudio959
Жыл бұрын
I believe I used 4mm but 5mm may work too with a small zip tie. You can get about 10 feet for like $12 on eBay or Amazon.
@bialyabnormal
2 жыл бұрын
Finally I found an answer what to do with the second line that goes from N112. Thanks man!
@chriswise6374
2 жыл бұрын
Hey man, where can I read up to understand this system better? I’m building a 1.8t and I’m worried about all of the vacuum hose routing. And turbo hose routing. I am doing UROTUNING SAI evap n249 delete. So I wanna learn how to route n75, diverter valve, and any other vacuum hose necessary
@chriswise6374
2 жыл бұрын
@@fewminutestudio959 thanks dog. I’m debating whether or not to delete this still. I might try it with a check valve first
@rubenaguilar4314
2 жыл бұрын
Do a video on it
@Yori-i1k
2 жыл бұрын
My uncle found one but its in bad state
@jordansluka6288
2 жыл бұрын
What size line did you have to buy?
@user-zd5ix2ep6g
2 жыл бұрын
Бля на русском бы, мне так де надо только не понимаю не хрена
@aboamaar2066
3 жыл бұрын
Really great, I wish you good luck
@tommy_rotten3984
3 жыл бұрын
Whats the point of deleting that thing?
@louiswooley966
3 жыл бұрын
I have a 88 and a 90 cool rides!
@thevermagamers3249
3 жыл бұрын
Are you that guy that made those car beat sounds
@shafaqaman9809
3 жыл бұрын
He ded
@lkz6696
3 жыл бұрын
If we can simply connect the vacuum line from the Diverter Valve directly to the Intake Manifold then why did Audi/VW invent the N249 system?
@fewminutestudio959
3 жыл бұрын
If you can get a tune and unlock 60 more horsepower then why didn’t they just send the car from factory with 60 more? It just gives it constant vacuum instead of the system deciding to bleed off boost when it wants.
@pucchardthegamer1156
3 жыл бұрын
We have Suzuki samurai 2020 still in production in India for army and police hehehehehhheh
@fewminutestudio959
3 жыл бұрын
That’s awesome!!
@pucchardthegamer1156
3 жыл бұрын
@@fewminutestudio959 if you want to get a new samurai you should come to Delhi capital of india and from there you can get samurai by your choice.....and simply export it to your country. You can buy both junk and complete samurai ..
@chasesmith1880
3 жыл бұрын
What line is t off the fuel pressure regulator
@fewminutestudio959
2 жыл бұрын
I T'd my boost line off of it for my gauge.
@trevor959
3 жыл бұрын
where is the fuse boxes
@werewolfpixies123
3 жыл бұрын
How do I like a video twice?
@stargazer2504
3 жыл бұрын
Pro tip: because of some sort of aerodynamic crap, the exhaust needs to exit to the left side behind the rear wheel (factory locaton). Been there, done that, and nearly died from CO poisoning. Turn the exhaust out to the left side if you want to live.
@tiktoktrends4098
4 жыл бұрын
How does it sound making boost and going fast?
@tiktoktrends4098
4 жыл бұрын
And can you hear the turbo whine when it’s cold more?
@fewminutestudio959
4 жыл бұрын
It sounds AMAZING!!! It’s very loud and you can hear the turbo very well. I run about 35psi of boost with a tune so the turbo is screaming. It’s not as loud as a 6.0 turbo but sounds very good. As far as cold starts when I did this video I had just got home from school so it was hot. When it’s cold you can definitely hear it more. I have a high idle tune too so when you turn that on with the cold start the turbo sounds like a jet.
@tiktoktrends4098
4 жыл бұрын
Few Minute Studio ohh okay gotcha, and I’m assuming this is straight piped ? I have the same exhaust setup and really want to hear that turbo more!!
@tiktoktrends4098
4 жыл бұрын
And what about an intake? Do those make a difference when it comes to sound? I’m trying to make it sound somewhat like a 6.0 when it’s making boost. Like this for example kzitem.info/news/bejne/uaFrxWyag3aBfKw
@fewminutestudio959
4 жыл бұрын
Hate to say it but that’s just not gonna happen. 6.0 have a VGT turbos. The 7.3 will just never sounds like a 6.0. The 7.3 will sound way better motor wise but turbo wise it just isn’t gonna sound like that. Now as far as exhaust I have a 5 inch exhaust all the way back and in the video that was a 6 inch tip but I now have a 9 inch tip and believe it or not the tip size makes a difference. It has a lower noise now with the 9 inch tip. And YES a intake will make a huge difference. Putting a intake on any supercharged or turboed car will make the turbo or supercharger louder. Get a 6637 cold air intake. There about $50 and are the best for these trucks. They are a plain white intake but they are massive and used in semi’s. Doing both of those will definitely help. Also take the metal wrapping off the charged pipes. This will make it louder too. And just paint the bare pipe to whatever color you want. You can also take the insulation off the bottom part of the hood and that makes a good difference too. Hope this helps!
@purgervngyt6yearsago154
4 жыл бұрын
Remember that video that you made to teach ppl how to make car sounds with you’re mouth
@cattydaddy7224
4 жыл бұрын
I just bought one myself Wanted to know if the they have front gaurds and quarter panels or you cant buy them seperate? You might call them Fenders.
@cattydaddy7224
4 жыл бұрын
The one I bought has rust at the quarter panel right hand side and rust on the front right guard. Two door
@fewminutestudio959
4 жыл бұрын
I’m not a 100% sure tbh. I’m sure you probably can but I don’t know for sure.
@theeptimeinthegameforthepl4471
4 жыл бұрын
Do you have more videos about ur Samurai
@ericsauvageau223
4 жыл бұрын
If you want to keep the SAI functional you need to tee the inlet of the N112 to your intake manifold. Do not plug it.
@yahirmenjivar3905
4 жыл бұрын
Hermoso carro
@SpyderBiscuit
4 жыл бұрын
How difficult was it to reach the connections to the intake manifold? Did you have to remove any extra parts in order reach everything for disconnecting / connecting?
@fewminutestudio959
4 жыл бұрын
It wasn’t too bad. It would be easier to maybe remove the charge pipe and maybe a couple hoses but they are accessible without needing to remove anything they are just harder to make sure you get the line on good without removing anything.
@SpyderBiscuit
4 жыл бұрын
@@fewminutestudio959 gotcha. thank you!
@derrunnerkim
4 жыл бұрын
Hi, nice video, i will do the same on my tt 8n... So you just closed the valve in the front on one site and the other side you connected with the secondary air? Thanks
@fewminutestudio959
4 жыл бұрын
The other side was already connected to the secondary air so I just left that alone. All I did to the was change the line to a red one. On the other side it went to the actual N249 and that side I plugged just in case there was a vacuum leak or something like that.
@ablejimenez6975
4 жыл бұрын
What size vacuum line? 3 or 4mm?
@fewminutestudio959
4 жыл бұрын
I used 4mm but I honestly think that if you want a really snug fit 3mm might be better. I just went with 4mm because there was no way I was gonna for 3mm over my DV.
@johnsalazar4461
3 жыл бұрын
@@fewminutestudio959 so 4 feet 0f 3mm hose,? An 1 1/2 foot of 4mm hoses
@chuckjeannessr8682
4 жыл бұрын
Can anyone show me how to replace a side window in my 1988 Sammy? Thanx
@Slidedriver89
4 жыл бұрын
I am having a laugh at the moment, my neighbour is the one who bought this off of you, it is in good hands, he aswell as myself have been building it up, we rebuilt the engine (I know you said it was rebuilt but there were some issues we found, it had low compression and when we opened it it had issues) aswell as we have put some lower gearing in the transfer case to regear it for the 31's, we also redid the interior with new foams and seat coverings aswell as the carpet, and we threw in a locker rear diff and got the A/C blowing cold. He plans on getting a new suspension package plus he has put a new top on it, he loves this thing and has really put alot of care into it, its in good hands!
@codyswilley
4 жыл бұрын
Do you need to buy drive shaft spacers for the spring over axle lift
@fewminutestudio959
4 жыл бұрын
CODY SWILLEY I did not buy them and I didn’t have any problems as far as I know.
@codyswilley
4 жыл бұрын
@@fewminutestudio959 what about the steering. Any thing there
@fewminutestudio959
4 жыл бұрын
As far as I know no. Just like a small lift on a normal truck. Most of the time all that is fine unto you start getting into big lifts.
@elubaofficialvevo2787
4 жыл бұрын
nice video man!
@hollywoodhustlng4071
5 жыл бұрын
Correction,you have a header not HEADERS😂🤣
@fewminutestudio959
5 жыл бұрын
True lol but I think most people understand what I mean.
@hollywoodhustlng4071
4 жыл бұрын
Few Minute Studio I have a 88 and it has the big webber carburetor,black horse racing header,Cam,2 inch lift,lockers and I reduced the weight by hundreds of pounds by getting rid of everything that you don't need like,air conditioner,back seat and all emissions,open header😁Suzuki says the samurai's top speed is 71to 75 and mine gets up to 85 and with 31inch tires.I have the original engine 1.3 but it has over 150hp instead of the FACTORY 63HP lol.i kept the original engine because they are almost indestructible and are extremely reliable.Anyways I really like your Suki.The only problem with it is we had to rewire the ignition coil to the starter because it kept blowing fuses and the peice that goes from the distributor and plugs in by the top right kept blowing off and it would make to car shut down because I have to much power so if I really jump on it hard for awhile it will pop off from getting vibrated around so hard because it has alot of power now.Ps Suki's are the best 4x4 ever made and still is and that's a fact jack😉have a blessed week bro
@TProfileG
5 жыл бұрын
I think the JB43 is the one to buy. PAS and Coil Springs , Fuel Injection. They all made the Samurai better.
@brahim20112010
5 жыл бұрын
How much tourk the engine have?
@disastreee
5 жыл бұрын
Remember the car noises in 2013
@davidcraft4909
5 жыл бұрын
Its called a spoa spring over axle. And its supposed to be worth like 4.5 inches. Not sure but i read that on a forum from someone who seemed like they knew stuff lol.
@fewminutestudio959
5 жыл бұрын
Yea I know the name I just couldn’t think of it and I would say maybe 3 inches it raised it but I never measured when I did it. All I know is it was well worth it!
@davidcraft4909
5 жыл бұрын
@@fewminutestudio959 yeah mine has 3inch springs a spoa and longer shackles, im actually about to drop it 1.5 inches lol, it sits too tall. I just took a measuring tape to measure the difference of where it was mounted and i got 5.5 .
@fewminutestudio959
5 жыл бұрын
Wow that thing sounds like it would fall over lol. Thats awesome!
@kylemas2005
5 жыл бұрын
I remember my Zuki Sami. I always thought I was going to die taking turns on hwy exit roundabouts. lol. Great lil car. Its a shame Suzuki abandoned the US market.
@ysfma755
3 жыл бұрын
Car buyers in the US abandoned Suzuki. They had to leave.
Пікірлер