This is a video to show that the Turnigy 500 class heli motor - 1600KV - size - failed in my Align Trex 500 . It had issues from the start - what occurred was I got about 2 minutes or so of flight time - just enought time to get my heli trimmed nicely for a solid hands free hover when the eingine stopped suddenly. I though perhaps it was the battery - so changed up the battery - then it would not start all together - I changed up the 3 wires and managed to get it to fire up again - (strange eh?) - but again it only hovered for a 1minute this time - each time a bit less - until now it won't run at all. I also suspected the ESC so I took that out and bench ran it with a eflight .46 670KV motor and it worked perfectly - nearly dragging my 2X12 work bench across the room with a 14X8 triblade. No issues with the ESC - it had to be the motor. I took the motor out and bench ran it - I discovered that the wires coming into the engine from the bundle look like they may be at fault - I managed to get it to work just enough to hear the noises from the ESC but the engine did not run - I tried moving around the 3 wires - same thing - nothing. So - moral of this story I should have spent the 139 bucks and got the Align 70amp ESC and 500 class - heli motor bundle for my Scale build. All that effort and Nothing - only blessing is my heli is fine and I've got a new motor on order. This video is for HOBBY KING - support. Please send me another motor.
Негізгі бет Автокөліктер мен көлік құралдары 00045.MTS
Пікірлер