It's so nice having a full length strip down vid again, have missed them and yourselves!
@chemcody5119
19 күн бұрын
So glad to see you posting videos again!
@mdeodar
19 күн бұрын
We love you and Theresa.. 'Keep On Truckin'!! (And Annie, of course) 🐕
@jamesragus1577
19 күн бұрын
Good to see you back!😊
@howardlaunius7484
3 күн бұрын
Richard I have enjoyed so many of your videos as you not only explain how things work, you also point out how to properly do the many steps in building a transmission, but you also explain on what NOT to do with is probably even more critical for us amateurs..Thanks
@cullendolan5619
19 күн бұрын
This is a weird thing to say but watching you remove bolts is so satisfying. Glad to see the videos again
@kaisersoze1745
10 күн бұрын
Wow, Richard you make this look so incredibly easy!!!
@victorthecarguy3126
12 күн бұрын
Your videos are great and extremely helpful. I rebuilt a 4l60e that ate the forward planetary bearing using your videos and a few others. I just drove it and works. I'm very grateful to you for your work. Thank you and your family for making and uploading these videos.
@allenpence8948
19 күн бұрын
Glad to see a video again from you.
@robert64impala
17 күн бұрын
So glad to she you back again here 👊🏻 Damn missed you Richard🤙🏼😎so fantastic to see your talent Greetz from Holland Europe
@Organicmachine455
17 күн бұрын
Awesome as always. Love to learn all the complexities of transmissions from watching and listening
@sixtyfiveford
18 күн бұрын
Great to see you back!
@adammiller3178
3 күн бұрын
Glad to see you posting again.For some reason I like watching stuff get tore apart and the fact you explain every detail makes it so much better.
@donaldhalls2189
18 күн бұрын
Glad to see you back ,hope life is getting better, thanks for sharing, all the best to yous and your loved ones
@drewdougan
15 күн бұрын
Richard is the Transmission God!
@andrewelliot9723
15 күн бұрын
You're back ------ awesome !! ----- love the new shop !
@karlstrasen4758
9 күн бұрын
Happy you are back! Hope all is well and thank you for sharing your expert knowledge and hard work with us!
@donaldboyett2571
18 күн бұрын
Hey I want to tell Richard thank you for these videos. I have a 2004 Chevy Tahoe, and I built my 4l60E 2 years ago, and it's still going strong. It feels like another gear when my convertor locks up. I really pay attention to everything you say. I feel like with your help not only did I do the rebuild. I was able to make it better. Thank you
@Bootzey73
16 күн бұрын
WOOT!!!!!!! They’re back!
@thor6580
13 күн бұрын
What makes that Roots blower beautiful is the Pontiac that it's wrapped in.
@HypocriticYT
16 күн бұрын
Keep the videos coming 🎉
@wezos20
19 күн бұрын
Nice to see videos of y’all again
@tjs2047
19 күн бұрын
Welcome back.....cool cool
@scowell
9 күн бұрын
If you watch this at 2x you will see God. Love that Pontiac, went to HS with guys that had 66-67 Goats, uncle had a 67 2+2 with a 4spd... nice patina! Looks like it's got some Sweet Patina sauce on it!
@ghost13829
6 күн бұрын
Morning rich! Such a Kool intro
@bunning63
19 күн бұрын
I was at a drag race event in New Zealand, late eighties held on a closed road. Mustangs clutch exploded and a piece hit someone in the crowd.
@Mech7.3
19 күн бұрын
Good to see your videos again. Hope everyone is doing well. I have been wondering where Trent is now?
@richardteresacricheducatio3542
18 күн бұрын
He’s doing good
@mosessranchito0494
13 күн бұрын
What’s a shop without a cuss word. 😂
@sergiobollana
13 күн бұрын
Someone said that you can spot the true masters because they make it look easy.
@AndresMartinez-lk3nb
3 күн бұрын
You are back wooohooo
@ronwade2206
Күн бұрын
We started calling them Exploditions because of the transmissions even before the Goodyear tires started blowing up😊
@revzone3544
19 күн бұрын
Good to see you back..
@HypocriticYT
16 күн бұрын
When I was a teenager I blew a turbo 400 in a Pontiac Catalina with a 400 ci
@akvansky
19 күн бұрын
Nice to see you posting vids again!
@jerryhuff86
19 күн бұрын
So cool
@brianelleman3494
19 күн бұрын
Thank God you’re back!!
@WorldPowerLabs
14 күн бұрын
I have 339,000 miles on a 4R70W. It still shifts well. I do change the fluid every 40k miles. Maybe I've just been lucky.
@rtz549
19 күн бұрын
If you want to experiment with different thickness steels; find a machine shop with a grinder setup to change the thickness.
@user-xg4ux5qh2i
17 күн бұрын
Nice work Rich you didn't mention the O/D servo pin with the oring on it seals better did you recommend using the. That's the 4r75w
@PrecisionTransmission
16 күн бұрын
I will try to do that next time thank you for mentioning it
@lesliebrailsford1090
16 күн бұрын
Glad to see your channel back on, I really enjoy your videos and all your knowledge. I have a question not related to this video. I have a 2017 Allison transmission and I just drained the oil and changed the inner and outer filters. How much oil to refill, I'm thinking 8 quarts?
@BillGilpin
15 күн бұрын
Good to see a new video y'all " had me worried something happened! " hope y'all are liking your new shop!!" Got a ? Have a 1997 chevy tahoe 2wd had the 4l60e rebuilt, my ? Is that it shifts hard from 1st to second all the time, it goes in every gear 1 through 4 but first is a s.o.b...lol" my question is why 1st hits so hard? I'm on my 4th trans mount because it shifts so hard it ripped the rubber right off the mount...
@BillGilpin
15 күн бұрын
Zolman is who did the rebuild says the trans fine, it never did the hard shift to begin with before the rebuild..
@frankvitullo4925
19 күн бұрын
I’m so excited to get to watch your videos again Richard and Theresa!! Great job on the new shop and wish you guys the best of everything!!! And let’s not forget Annie. Glad to see her doing well too.
@builtbyme
19 күн бұрын
@frankvitullo4925 he has another channel. Been on it for a while.
@Pitsrforidiots
19 күн бұрын
I wish I had money to burn I would put you in a new AC unit
@frankvitullo4925
19 күн бұрын
@@builtbyme thanks I didn’t even know. As soon as I saw this video I clicked on it right away.
@builtbyme
19 күн бұрын
@frankvitullo4925 look for Richard and Teresa educational tranmission videos. That's the other channel
@felicitous48
9 күн бұрын
I wonder how many miles were put on it since the last rebuild? Great video, thanks!
@regentsuper3086
19 күн бұрын
Hi Richie and Family,.🙏, Biiiig greetings from Here BROOKLYN NEW YORK CITY. ❤❤❤
@mikecrout1214
6 күн бұрын
Enjoyed the program. Rebuild in 2015? Seems like a short life. Maybe the owner, when the rebuild was done, should have rebuilt the transfer case or installed a beefier unit. I've got a 2002 Dakota with 220,000 miles, parked 2 to 3 weeks when I'm on the road. Mechanically a sound runner.
@norrisfamily7868
13 күн бұрын
best
@shadowopsairman1583
19 күн бұрын
I wouldn't leave that Pontiac unpainted
@Brickland1951
19 күн бұрын
Very informative
@davidwood351
18 күн бұрын
Back to using the air wrench?
@hokie9910
15 күн бұрын
I’m not sure I’ve ever seen an Aisin transmission on a dodge need to be rebuilt on this channel.
@paulschoppe1448
7 күн бұрын
Hey Richard. I stopped at your shop on the way home from the Grand Canyon back in October of 2021 and got my 2003 Crown Victoria transmission serviced. It’s time to drop the pan and replace the filter. Did y’all go back with Mercon V? Don’t want to mix fluids. Thanks
@Megabob777
19 күн бұрын
Oh my god, im so excited
@randomkind1001
19 күн бұрын
I do have a question. How can fluid in the outside part of the connector burn up the trans when the inside part of the connector is submerged in fluid?
@frankpatterson9453
5 күн бұрын
yea i ask him that question and he deleted my post. i call BS
@chrismarsh9978
19 күн бұрын
Richard do you do mail order ??? i want you to build a Trans for my 2002 4x4 Excursion ???
@PrecisionTransmission
16 күн бұрын
No, sir, we only install all of our units
@12345.......
19 күн бұрын
Was the other one demonetized because he said bull poop? Im still watching it again. Nope 35:58 still there, and still love it. Oops, just realized it was on the old channel. STILL WATCHING IT!!!!!!
@dragonridertv5641
19 күн бұрын
How do I get a transmission to y’all for a rebuild on a built 4l60e in a 2005 Tahoe with a forged cammed 6.0 ls
@FDXman65
9 күн бұрын
So am I correct that they do not except a transmission shipped to them to rebuild but must have the entire vehicle?
@GTFCEO
19 күн бұрын
Why did they get a new shop? I didn't think the son leaving would cause that, are the two things related?
@PrecisionTransmission
16 күн бұрын
Retired and built a 60 x 60 shop at home three lifts and working there to make race car money lol and what else I need to enjoy life
@louisharris6398
19 күн бұрын
The big question is are you going to warranty it or charge for another rebuild
@PrecisionTransmission
19 күн бұрын
No, you answer this question for me. What would you do? After nine years?
@louisharris6398
19 күн бұрын
@@PrecisionTransmission after nine years I would charge again
@chrismclain8769
19 күн бұрын
Some of fords better ideas 💡😂 happy 4th
@desolategrey
10 күн бұрын
I need a 4r110w converted to PTO case would you be able?? thank you
@anthonylawrencesnow
17 күн бұрын
Are you using this channel from here out or the new one?
@PrecisionTransmission
16 күн бұрын
We believe that it is best that we go ahead and use both that way a lot of our audience does not miss out on our videos
@ludvigjakobsson9347
17 күн бұрын
So what happend with your old garage?
@billynomates920
19 күн бұрын
good to see this.
@obocecha
19 күн бұрын
Can’t believe how quick I clicked on this video.
@builtbyme
19 күн бұрын
I guess for those who don't know or didn't know Rich has been making videos on his channel. @Richard and Teresa Educational Transmission Videos. He's got tons of stuff he made on there.
@chosenone2856
19 күн бұрын
man Richard you are a master at these transmissions. i absolutely love watching your videos. I'm a gear head myself. But don't dare open up a transmission for anything serious..😂 so much to know about before even attempting to try anything. Thats why we have masters like yourself. keep up the great work. looking forward to the next one.
@mikeycornwell0138
19 күн бұрын
That catalina is the car is the car to sneak everyone into the drive in back in the day.
@oldguy2082
19 күн бұрын
It's great to see all of again,especially Richard. Looking forward to finally seeing more videos from you.
@builtbyme
19 күн бұрын
@@oldguy2082 they have another channel. He never stopped making videos.
@MsLoneWolf4
19 күн бұрын
Second gear is just like but not quite as a th350.
@rickmarr4744
12 күн бұрын
I never see you putting a tranmission back together.
@PrecisionTransmission
12 күн бұрын
Unfortunately, customers don’t wanna pay me to videotape putting a transmission back together. They would rather me concentrate on what they’re paying for.
@markmichlewicz5141
19 күн бұрын
Transtar.what a great company for trans parts.
@VicFix
19 күн бұрын
We love a company that sells inclusive parts.. 😎🏳🌈
@joseserrano9275
19 күн бұрын
I love your vídeos Richard and Teresa! Good Luck in your new beautiful shop.
@timprussell
6 сағат бұрын
That thing has a four b̶o̶d̶y̶ golf bag trunk.
@peteysquirrelchaser9028
19 күн бұрын
Hey Richard Teresa & Annie, glad to see you back!
@markmichlewicz5141
19 күн бұрын
I love the 4r70w.I've done 100s of them.easy and cheap to biuld.I'm so excited to see you do a ford trans.
@joehalliday4989
2 күн бұрын
There's a whole lot of people thinking you and Theresa for coming back and videoing again what I want to know is if it's your transmission work why did it go down never mind welcome back and all that let's find out your mistakes
@Mark_C1
19 күн бұрын
So so good to see y’all back. Never going to work on an American transmission but honestly, watching you guys tear these down and explaining them in detail is absolutely fascinating ❤ Again, so pleased you’re all back and keeping a similar format !
@mark98070
19 күн бұрын
So good to see y'all back doing transmissions
@jfezziy
19 күн бұрын
Im glad to see you guys are back. I really enjoyed your videos
@user-gd3fo4kt1l
19 күн бұрын
Glad you’re back!
@user-zr2lg8tl9h
19 күн бұрын
i absolutely love your intro! simple and perfect!
@rodneymiddleton9624
19 күн бұрын
Thanks Richard!!! Good to see you have your shop in order!
@builtbyme
19 күн бұрын
Wait, did you get access to the original channel back?
@12345.......
19 күн бұрын
Right!? We are just time travelers
@WvFisherman90
13 күн бұрын
Yes he did. He mentioned a few videos ago. Said he'll be posting some stuff over there as well.
@builtbyme
13 күн бұрын
@WvFisherman90 nice, I never stopped following cause he started the other channel. But having the original channel with 250k subscribers, I know he don't do it for the payout from youtube. But it does help keep things going. And honestly I hope him and his son worked out whatever was going on. I've been there with my own dad, and I can say today we are both great friends and father and son. Idk where id be without my old man. Hopefully them boys worked things out.
@hh-qc7rp
15 күн бұрын
Algorithm booster
@Mike88GT
19 күн бұрын
Good to see that you went back to air impact. you always seemed more comfortable with that.
@Garth2011
19 күн бұрын
Pretty sure if you are really good with the trigger on those electric tools, you can prevent the electric brake from engaging by releasing the trigger switch somewhere between half way and off which will allow the chuck to freewheel or cost vs. stop.
@ChrisB257
19 күн бұрын
Great to see back Richard. :)
@12345.......
19 күн бұрын
Please pin a comment for your new channel, or put it in the description. I did research to find your new channel.
@wesleypulkka7447
19 күн бұрын
Richard and Theresa, I'm very happy to see you back on You Tube! I've always enjoyed your transmission autopsies! Good to see you in good health and spirit!
@HamRadio200
19 күн бұрын
So glad you are back on this channel!
@katiejameson
19 күн бұрын
I got ao excited when I saw this notification!!!! I'm loving seeing you back Richard!!
@throughmylens5127
19 күн бұрын
Glad y'all are back
@wizerd5150
19 күн бұрын
WAHOO! CLICK ! PLAY !
@joehalliday4989
2 күн бұрын
So it's your transmission work that's coming back did I get that right
@joehalliday4989
2 күн бұрын
I just don't understand my transmission man would be upset if this shit only went 9 years
Пікірлер: 119