Muchas gracias por el video ; como se lee el pin code? Ya que recien estoy comenzando ,adquiri este mismo programador y quisiera aprender sobre immo off, odometros , airbag .
@LOOKATUSCREW
4 жыл бұрын
i buddy, i have the same ecu here but i dont know what type of "liquid" you use to desoldering, can u help me?
@jozefProperty
3 жыл бұрын
How mach power can be gained from this process?
@mohamed299
Жыл бұрын
Good joob
@sforman2622
4 жыл бұрын
Dobře ty! Zkus i VAG-Commander. Vyčteš loginy immo budíků bez pájení.
@iamvehicle8596
4 жыл бұрын
Díky. Commander je dost omezený nástroj, lepší je FVDI.
@sforman2622
4 жыл бұрын
@@iamvehicle8596 dík, vyzkouším
@SKZT412
4 жыл бұрын
После всего этого надо положить новый герметик и закрутить , старый герметик держать не будет и при попадании влажности блок умрет.
@iamvehicle8596
4 жыл бұрын
MSA15, EDC15 does not need a new sealant. Tested on many ECUs. Newer EDC16 and EDC17 needs sealant.
@abdenbielmakhoukhi6757
3 жыл бұрын
hey, your video is really great. I'd like to ask you if it's possible I'd like immodecoding I'm not milk if you want to send it to me if it's possible, thank you
@pjson70
3 жыл бұрын
Is this the only way to get the immo revoved from the Car?
@iamvehicle8596
3 жыл бұрын
Yes.
@agi-vasssoma3354
3 жыл бұрын
I do it same. After immo off car is start but key is flashing on dashboard. What is the solution?
@iamvehicle8596
3 жыл бұрын
Black tape or remove LED from dashboard. Is not solution for this.
@UrbanRave1982
3 жыл бұрын
I bought an ecu that immo is turned of. Can I take the eeprom from the new ecu and put it on my old ecu? Because the old ecu is chip tuned and good.
@iamvehicle8596
3 жыл бұрын
Yes, you can swap eeprom.
@UrbanRave1982
3 жыл бұрын
@@iamvehicle8596 ok. Good. That’s easier then swapping the tuning chip. And I was affrad that the eeprom was specifically for the ecu. But ok good. And the whole immo on and off is only on the eeprom? So I don’t need to do anything else. Just swap it
@UrbanRave1982
3 жыл бұрын
@@iamvehicle8596 Bought ECU’s are the same. It says 0 261 204 184/185 And then some other says 8D0 907 557 T Only difference is where it says the year. The old says 24.01.97 and bunch of other numbers. And the new with immo of says 11.09.96 and some other shit. But when I open them up. They are identical “of course” But when I look on the components and all the tiny chips that are inside them “they look the same but these is difference on the numbers on them. Does it matter or can I still swap the eeprom??? My original ECU whit chip tuning the eeprom says 67AN B58 258 And the new one with immo off the eeprom says 63AD B58 258 So my question is. Does it matter? Or can I still just. Swap the eeprom over to the “old, original, chip tuned” ECU?
@iamvehicle8596
3 жыл бұрын
@@UrbanRave1982 Yes, you can swap old eeprom to the new ECU.
@UrbanRave1982
3 жыл бұрын
@@iamvehicle8596 and even if the letters and numbers on the eeprom are not identical?
@giacomoguajana
3 жыл бұрын
Cosa spalmi prima di dissaldare la eeprom? Grazie
@giacomoguajana
3 жыл бұрын
@@FrancoPN cosi posso fare una scodifica parziale sulla edc15c7?
@VisarLimani
4 жыл бұрын
Thanks for the video! Which software are u using to immo off after reading from eeprom? Thanks.
@iamvehicle8596
4 жыл бұрын
Immo universal decoding
@VisarLimani
4 жыл бұрын
@@iamvehicle8596 its possible to download it anywhere?? Thanks in advance.
Пікірлер: 27