"will require an experienced picker"...."fairly well made"...that's basically a full endorsement.The highlight of the Abus designer's career!
@KeroZimerman
Жыл бұрын
… and still this decent lock takes LPL only 20 seconds to pick 🤣
@Bigrignohio
Жыл бұрын
@@KeroZimerman That's the difference between an "experienced" picker and a "god level" one.
@paxdrago1
Жыл бұрын
A 5 min review Is high praise
@bostonrailfan2427
Жыл бұрын
@@KeroZimerman after he tried it multiple times to lessen the time to make it seem like he did it right the first time he never opens these without have done it multiple times before filming, it’s what he has said repeatedly in his earlier videos
@michaelrios-maldonado5486
Жыл бұрын
I LPL likes it, I like it!!
@panda4247
Жыл бұрын
So somewhere in Abus compound, there exist an opponent for LPL... The Lock Designing Lawyer
@swistedfilms
Жыл бұрын
The laws of physics demands it, just as matter and anti-matter must exist.
@PDeRop
Жыл бұрын
I want to see their videos.
@tychobra1
Жыл бұрын
Great comment 😀 YMMD!
@legallyfree2955
Жыл бұрын
I think the Lock Designing Lawyers main opponent is the Lock Company Accounting Lawyer, not the LPL.
@gingermcgingin4106
Жыл бұрын
@legallyfree2955 Well yeah, why do you think they haven't appeared on this channel yet?
@DSE8991
Жыл бұрын
Lock gutting and destructive opening are something we don’t see often from LPL these days, and I kinda miss them. Glad to see it!
@avinotion
Жыл бұрын
My sentiment as well. Wish he'd also feature more better locks.
@brianhawthorne7603
Жыл бұрын
I love seeing the cores removed and gutted. It makes it so much easier to learn the connection between, say, counter-rotation and the presence of a spool.
@ConstantlyDamaged
Жыл бұрын
Same, yeah. His pivot from locksport to "making people aware of bad security" is understandable, but I really miss the trading of challenge locks and destructive entry stuff.
@t3hd0n
Жыл бұрын
He probably went by the metrics and just focuses on videos more people watch lol
@ConstantlyDamaged
Жыл бұрын
@@t3hd0n Nah, from what he said in the SaintCon talk he gave, it was a deliberate effort to showcase bad locks and shame companies into fixing their crap.
@martinda7446
Жыл бұрын
''Not exceptionally difficult, but will require an experienced picker'' .... fifteen seconds later he is dismantling it....
@RochelleHasTooManyHobbies
Жыл бұрын
He makes it look so easy!! To you or I, these pins would take an eternity to pick because they take a very precise touch. LPL is just that good!
@shroom903
Жыл бұрын
And he practices for hours or even days on some locks until he figures them out
@SpartanIVAlpha015
Жыл бұрын
There are novice pickers. There are veteran pickers. There are experienced pickers. There are exceptional pickers. And there is the Lock Picking Layer. BosnianBill called him a "generational talent" previously. LPL is among the greatest lock pickers alive.
@Radar_of_the_Stars
Жыл бұрын
I like that this lock has a legal protection as well as a physical protection
@1s3ngr1m
Жыл бұрын
Criminals watching youtube in their off time will probably respect LPL opinion on a lock more than any legal or physical protection...
@godskook
Жыл бұрын
The legal protection isn't going to stop anyone who knows how to make a mold. Its likely a cheap protection, but I doubt its a valuable one.
@marchern8526
Жыл бұрын
sounds like a job for.. you know.. Lockpicking Lawyer
@spazoq
Жыл бұрын
ABUS "Look! Nobody can make a blank key for our locks forever and ever! Patented AND Trademarked" China "Here, hold my beer."
@dylandepetro4187
Жыл бұрын
@@spazoq lol. It is true. China don’t care about patents or trademarks.
@TechfulThinking
Жыл бұрын
I swear lock makers have started making their products as shiny as possible just to try identifying LPL. There’s going to come a day where he has to wear a mask to open some of these locks 😅
@kivychan
Жыл бұрын
i recall him having to wear a mask in a video a year or two ago for that very reason
@FelipeGomesProfessor
Жыл бұрын
His left hand movements seemed unsusual for me, and I guess it's not to leave his fingerprints on the top of the padlock. You can see the pattern of his hands on the padlock after he picks it up, but the fingertips just touched its sides, not visible to the camera.
@HIcycles
Жыл бұрын
@@FelipeGomesProfessor I noticed this, too. Someone clever might still be able to get a partial...
@alecweinstein4990
Жыл бұрын
@@FelipeGomesProfessor That grab to pick it was SO smooth I had to rewind it a few times
@MonkeyJedi99
Жыл бұрын
@@FelipeGomesProfessor Someone send him a box of nitrile gloves! He seems to have size large hands.
@Jbot123
Жыл бұрын
The phrase "screw down the shackle hole" made me laugh a lot more than it should have.
@mistaecco
Жыл бұрын
This reminds me of the Famicom Disc system by Ninendo! An expansion device for the Japanese NES, it used what were essentially standard floppy discs to make producing games far cheaper, but consequently they'd be quite easy to make bootlegs of. To get around this, Nintendo added their name to the molding of the disc cartridges, and made it so that if those letters WEREN'T there, it wouldn't be able to close the lid and therefore couldn't boot! Of course, people eventually found ways to get around these measures, but I still think it was quite a clever piece of hardware-based copy protection!
@borisgalos6967
Жыл бұрын
A similar thing was done in the BIOS of the original IBM PC where system software would have COPYRIGHT IBM at a specific location in memory. Some of the system software would look for the letters IBM at the specific spot and fail if they didn't find it. Black box cloners (those who wrote their own equivalent but with no knowledge aside from documented functionality) turned to writing XXXXXNOT IBM at that location so the check for IBM would succeed without them putting in a false copyright statement.
@borrrden
Жыл бұрын
Game boy carts are required by the loader to display the Nintendo logo in order for any cart to be executed (I.e. the Nintendo logo code is verified to be present) for the same reason. If you include it in your non licensed game you will have committed trademark violation.
@adamsfusion
Жыл бұрын
Sega did this with the Genesis by requiring the on-board ROM to start with something like "licensed by Sega enterprises" called TMSS (Trademark Security System). They even took somebody to court over it but ended up losing.
@G-F-D
Жыл бұрын
also similar and from the same era, Sega’s Trademark Security System required writing “SEGA” to a certain address on some Genesis/Mega Drive models during the boot process, which would then display a screen saying that the software was officially licensed by Sega. When Accolade reverse‐engineered this and used it to get their unlicensed games to run, Sega filed a lawsuit. Sega v. Accolade was a very important ruling for copyright and trademark law, and it established that this overstepped the scope of copyright and trademark law, and ultimately held Sega responsible for forcing its trademark on Accolade’s games. So none of this even worked at all, and Sega lost! And now we have a bunch of Sega hardware that has this annoying DRM which was entirely useless even in its day.
@ThePulmentinum
Жыл бұрын
PlayStation one used a similar system. Games were on CDs and the lens of the reader is able to wobble a bit to adjust to the trace of the CD within a certain tolerance. Original games were made to make the lens intentionally wobble and the wobble pattern was the signature of an original game that required a special machine to be burned on a CD. Copied games did not have that pattern and thus failed the authenticity check, unless of course the playstation was modified to skip that.
@rpfour4
Жыл бұрын
My gosh. Picking spool pin is so hard for me and you make it look so effortless. Great video!
@the_undead
Жыл бұрын
To be fair he has probably picked many thousands of them
@echothehusky
Жыл бұрын
I like picking locks with spool pins as they give very good feedback.
@ianbritstone3717
Жыл бұрын
Visited the Factory in Germany where they make these locks. The core is interchangable and you can get some very high security keys/keyways in there. In house we use a ZOLIT system patented to 2032.
@charanvantijn541
Жыл бұрын
patented in 2032?? Typing mistake?
@printgymnast368
Жыл бұрын
@Charan van Tijn the patent expires in 2032 is what I assume
@davidson8939
8 ай бұрын
@@charanvantijn541 its a timelord lock. I wonder if he could pick THAT lock. it does use a key.
@bobs4117
Жыл бұрын
Dolby did something similar with the original Dolby Digital on film encoding. The digital bits were encoded in a patch (similar to a modern QR code) but it had a Dolby logo in the center. The decoder looked for that symbol, and thus no one else could encode the signal on film without violating their trademark.
@TheRavenCoder
Жыл бұрын
So did the Gameboy. The system won't fully boot unless the cartridge displays the Gameboy logo. This prevented third party developers from creating games without Nintendo approval.
@johndododoe1411
Жыл бұрын
Another great example is the CPUID in Intel 486DX2 and later. Intel ones return the phrase "GenuineIntel", others return their own 12 letter trademark phrases such as "CyrixInstead" . Apple machines used to contain a chip returning a copyrighted poem about not copying MacOsX. Not sure how legal virtual machine software emulates that without running on obsolete Apple hardware .
@foogod4237
Жыл бұрын
@@johndododoe1411 I'm pretty sure that CPUID field was originally intended just for informational purposes, not anything trademark or legal related. The point was that there are actually some situations (such a when uploading microcode, or working around CPU bugs, etc) where you actually really do need to know whether you're dealing with an Intel CPU or one made by a different manufacturer, because even if they are nominally compatible on the outside, subtle differences in the internal design from one manufacturer to the next can actually sometimes matter. I've never personally heard of the Apple poem thing, and can't seem to find any references to it online at all. Are you sure that was actually real? In any case, I don't actually see why that would be subject to any better legal protection than the copyright that already existed on the rest of the Apple ROM images anyway...
@kindablue1959
Жыл бұрын
@@foogod4237 Any 'normal' code in a ROM could be argued as independently developed, even if it was exactly the same code. But that could not be argued for a unique poem (unless you subscribe to the million-monkeys theory). Same here with the key channel - any number of slots and grooves could be independently developed, but not spelling out ABUS.
@johndododoe1411
Жыл бұрын
@@foogod4237 Yes, the value has been quoted in technical contexts as a secret hex value. But once I saw that all bytes were ASCII codes for letters, I could read it as text.
@cyborgcoyote3251
Жыл бұрын
Call me crazy, but the way the lock was picked up just before picking it looked remarkably like a slight of hand move. Sliding something into the hand holding the lock unseen. Particularly the way your fingers moved once you had a grip on the lock, like you were maneuvering a hidden thing into position.
@lockpickinglawyer
Жыл бұрын
Astute observation… you will often see me handling shiny locks in peculiar ways, or placing them in positions that I’ve predetermined. It’s the least intrusive way of ensuring my reflection doesn’t appear on video. 👍
@Null--
Жыл бұрын
@@lockpickinglawyer You and AvE, completely anonymous except if someone hears you talk :)
@headintheshedable
Жыл бұрын
How do we know thats his real voice? ;)
@simonw3858
Жыл бұрын
I bet he wears gloves out in public. Those hands are a dead giveaway 👐🥷
@lazarusnecrosis5869
Жыл бұрын
@@lockpickinglawyer I love your tools. The first lock I ever picked was with the Companion the night I assembled it. Any suggestions where to get a tabletop vise like yours without breaking the bank? I can only ever find ones that affix themselves to the side of a table.
@mousseman8239
Жыл бұрын
5 Minute LPL video. This must be a high-security lock!
@RealMTBAddict
Жыл бұрын
Well it is an Abus Rock
@butter262
Жыл бұрын
20 seconds to an open.
@RealMTBAddict
Жыл бұрын
@@butter262 for an experienced picker
@andymanaus1077
Жыл бұрын
That was one of the fastest and smoothest picks I've ever seen from LPL. It was as if the serrated pin and spools were not even there. Amazing skills.
@javaguru7141
Жыл бұрын
When legal shenanigans _and_ locks are involved he's in his element 😄
@johndododoe1411
Жыл бұрын
The many identical pins in known locations helped giving the game away, unlike an unpredictable combination of different security pins with different false sets to skip.
@craigwilson4903
Жыл бұрын
He only picked it once- it was probably a fluke.
@andymanaus1077
Жыл бұрын
@@craigwilson4903 Good point. I didn't notice that. Well spotted, you should be a lawyer. LOL
@P_RO_
Жыл бұрын
He's sure to have picked this lock at least a dozen times before filming, and I'm sure he gutted it at least once too. And then he may have filmed it multiple times to get the best opening. There are several locksport pickers who do locks like these straight out of a sealed package- now THAT is what I call impressive.
@loriw2661
Жыл бұрын
This is probably the best review of a padlock I’ve seen from LPL. I’m buying one. Just checked…they’re around $50.
@RealRickCox
Жыл бұрын
I love how he sings the praises of the lock and all its security features and then bypasses it almost instantly. There's really no such think as a "good" lock capable of keeping LPL out.
@queazocotal
Жыл бұрын
There have been quite a few. Most notably perhaps the bowley lock.
@GuitarsRockForever
Жыл бұрын
There was one challenge lock he couldn't pick, and one lock with weird key way that couldn't be picked. That's what I can immediately remember. There could be more.
@lairdcummings9092
Жыл бұрын
The Naughty Bucket is less full these days, but it's not empty yet.
@timp2751
Жыл бұрын
@@queazocotal Bowley has been picked elsewhere though and the single row variant has even been EPGd, its an interesting lock but certainly not top of the pile when it comes to pick resistance by some way. Don't think LPLs ever shown an Abloy protec. Evva mcs is a another very tough pick, there's a vid of someone doing it but taking 10-20min and using a stethoscope...
@bmw328igearhead
Жыл бұрын
Locks only keep honest people out...
@Madlintelf
Жыл бұрын
I love the picking and gutting videos, yes the other videos are informative, but I still love the basics LPL. Thanks!
@Stuart_Cox1969
Жыл бұрын
Happy memories remembering Bosnian Bill trying to use a C clip remover, miss him so much, hope he's doing well.
@STRAKAZulu
Жыл бұрын
A rather clever way to prevent copying keys.
@ftswarbill
Жыл бұрын
*$20.00 tip will get any key copied.*
@TestECull
Жыл бұрын
Key cutting machines are not difficult to buy and you can make a key blank pretty easily with a hacksaw and a dremel.
@ManunKanava
Жыл бұрын
Well, quite normal. Abloy has patented their newest locktypes, always has. The patent does always expire after enough years. Yes, it's to prevent anyone to just copy any key and also the business reason. For example in a house that has been rented to someone, the tenant cannot just go easily copy the key without permission.
@Alex-og8qr
Жыл бұрын
@@TestECull You already tried? It is definitely NOT an easy task. Oh yes you can set up a CNC machine to do it - but that will copy any key without magnets or really special features.
@brianwelch1579
Жыл бұрын
But the shape of the keyway means a clever aftermarket key would simply not have the "S". A "Compatible" key probably can be found or made pretty simply, too. It doesn't "need" all that fluting and deep grooves, the keyway is *basically* straight across.
@zacharybennett6292
Жыл бұрын
Got into lock picking as a hobby from watching you and Bosnian Bill. Like for years. I bought a cheap Amazon pick set and started learning, then got a better set but can't wait to have some of your tools. The covert Companion, notch decoder, dimple pick and rake, tubular core picks, etc. I love you and all your knowledge you spread! Keep up the amazing work! One day I want to be a true professional lockpicker.
@micahestep7679
Жыл бұрын
I got the covert companion with expansion packs a few months back. It's drawback is that the shortest of the tools takes getting used to and you loose the sensitivity of a longer pick. The upshot is it's way less bulky than my overstuffed pick wallet and can be carried in my top pocket and forgotten about. It also has a lanyard attachment but the stabby parts make it impractical to wear on a necklace. Also, I've found that a rubber band or ladies hair tie is necessary to keep it from unfolding. I would still recommend you getting one.
@dukegust8818
Жыл бұрын
@micahestep7679 rubber band to keep it from unfolding??? if put together correctly all the parts are firm not loose i had to take mine apart because i forgot a rubber washer
@micahestep7679
Жыл бұрын
@@dukegust8818 yeah, it's not super loose but still an issue if carried in a pants pocket. I prefer to secure it with a rubber band or hair tie to protect my genitals which are well above average in size and often get in the way if stuffed down the same pant leg as my pick tools and other e.d.c. 😊
@sophiophile
Жыл бұрын
I really recommend getting into making your own tools. It doesn't take much time at all, saves a ton of money, and you will eventually find that you can make tools that suit your picking technique better than anything you can buy.
@HariSeldon913
Жыл бұрын
Hey LPL, I missed it when you hit 4M subscribers. Probably because you don't make a big deal about it, but belated congrats to you.
@mCblue79
Жыл бұрын
I've never picked a lock in my life. But I watch LPL's videos as soon as they drop. And I can't explain why LoL. 😊
@softweir
Жыл бұрын
Me too, though I know *why* I enjoy them so much: I love to learn about clever gadgets, and there is no gadget so clever as a really good lock. More than that, LPL is way above many other lock-picking KZitemrs in the quality of his presentation:- he *always* knows what he is going to say, it's always informative, his deliver is faultless and he has that relaxed and yet compelling voice and mood. OK, I'm not too enthused by endless "this is a bad lock" videos, but knowing in what way they are bad is informative. However, after all that praise, I have to say it:- his April fools videos do not appeal to my sense of humour in any way whatsoever. Those I give a skip.
@richardhenry5961
Жыл бұрын
This is why I purchase certain padlocks by it will "require an experienced picker" "LockPickingLawyer". And yes I have been picking a little, its harder then you think, its an art form with a very good technique. Its like playing a Piano, practice, practice!
@FelipeGomesProfessor
Жыл бұрын
Well said. I have experience picking in the rake style and disassembling locks, but I've recently tried picking single pins (the right way to do it for tough locks) and I barely could handle the tool.
@TysonJensen
Жыл бұрын
A little odd that the pins could be picked in order like that. Usually with spools and serrated pins it takes a few tries to get the order right since the entire point of security pins is that you can't easily feel the binding order. Having them bind front to back seems like this particular lock either got unlucky, or the design has a flaw that makes the security pins less effective.
@ericpetersen8155
Жыл бұрын
He always picks from front to back.
@TysonJensen
Жыл бұрын
@@ericpetersen8155 It should take multiple passes -- e.g, say we have an excellent but only 4 pin lock it might go click on one, nothing on two, three is binding, got a click on three, four is binding, counter rotation on 4, 4 feels set, something dropped back down, starting over another click on one, two is binding and we got this open. But this lock was "one. two. three. four. five. six." no revisits, no drops.
@R33f4_61
Жыл бұрын
@@ericpetersen8155 That's not the point Tyson is making. He's saying he thought it was odd that all the pins bound in order and didn't need to be reset. I was also thinking the same... maybe its something to do with tolerances???🤔
@davidcovington901
Жыл бұрын
This has happened several times before. (I commented on there being 2 such examples in 2 consecutive weeks, but don't know how to search for old comments, or I would give the episode numbers.) Relieved to see it isn't something I've just misunderstood! I stared at the key bitting here, but saw no clue that LPL could be sub-consciously choosing such locks.
@R33f4_61
Жыл бұрын
@@davidcovington901 Any idea why ? I'm very curious as to how LPL was able to go from pins 1-6 and didn't have to go back an reset any pins. Never seen that myself, but I'm not the LPL, I'm just a mere mortal.
@LikeOnATree
Жыл бұрын
I always, always love watching LPL gut a lock!
@fetsluck5620
Жыл бұрын
Any LPL video that is over 3 minutes is a great day!
@SkylersRants
Жыл бұрын
Wow, that lock got pretty high praise.
@RealMTBAddict
Жыл бұрын
It has always been a quality lock
@TimmyMoza
Жыл бұрын
Really enjoy the vids where you show us the core and inner workings. This is a nice lock and I would use it.
@thunderfire741
Жыл бұрын
The lawyer part coming in clutch, understanding the potential patent intentions of design
@jpendowski7503
Жыл бұрын
I would like to know how a spool adds to pick resistance. Seeing the inside of the lock is a treat.
@t3mtf8
Жыл бұрын
The smaller diameter of the spool middle means that if the middle of the spool is in the shear line, you will have to relieve tension to allow the wider shoulder to pass the shear line. This could allow your other pins to unset, and you start all over.
@JathraDH
Жыл бұрын
In addition to what Andy said the spool will defeat novice pickers because the pin appears to be set (by feel) and they will get confused as to what is holding the lock up. Serrated pins are the same idea, they provide tactile feedback when the pin slides past the serrations that can trick someone into thinking the pin is set.
@dancoroian1
Жыл бұрын
Is this the most secure (non-massive, insanely expensive) lock you've ever shown on the channel? Your commentary (relative to the usual treatment) left me extremely impressed
@mickeymaus1
Жыл бұрын
There was a Abus Granit 37RK/80 version also here on the channel.
@webbowser8834
Жыл бұрын
I would say there's a couple in the naughty bucket chronicles that could give this lock a run for its money, but this is def a solid lock. Easily top 10% of the locks he's shown on this channel.
@caleschley
Жыл бұрын
Not even close. He used to review challenging and secure locks almost exclusively back before episode 500. I miss those days, cause all the shitty locks are getting boring.
@dancoroian1
Жыл бұрын
@@webbowser8834 thanks for the perspective!
@dancoroian1
Жыл бұрын
@@caleschley gotcha, I wasn't subscribed back in those days. Maybe I'll go take a look, thanks for the info
@TheQuark6789
Жыл бұрын
That's a lot more useful and clever than I was expecting. Although it probably also means replacement keys are more expensive.
@lazarusnecrosis5869
Жыл бұрын
Great vid! I love the disassembly ones. I wish every video could end that way. Keep the awesome content coming, sir.
@leh0rla
Жыл бұрын
As soon as I saw it was a 5 minutes video, I knew we finaly had a good lock to look at.
@kanrakucheese
Жыл бұрын
On the potential trademark protection for the keyway and key: While it might prevent exact clones of the lock, I doubt it would stop companies making keys. In Sega v. Accolade the appeals court rejected Sega's attempt to do something that's very similar in concept (system only accepting software if it contained the trademark protected "SEGA" logo) and stated using trademarks to bypass copy protection was protected as Fair Use.
@codybill24
Жыл бұрын
Yes! My favorite videos (besides the April fools ones) are the ones in which we get to see the insides of the device in question. Glad to see another one.
@somejoe7777
Жыл бұрын
FYI, this keyway is called the "888" keyway by ABUS. I have one of these locks and it's one of the best you can get without getting into hundreds of dollar specialty padlocks.
@echothehusky
Жыл бұрын
I like them too, I have 4, I always thought the logo on the keyway was a cute design.
@thisislilraskal
Жыл бұрын
He didn't do it again to prove it wasn't a fluke. Just straight to dismantling.
@SharkDude1
Жыл бұрын
I have always used Abus locks for my business. Never lost one ever. I did use other locks in the past and lost a few of them from crooks banging them open with hammers. Abus is my number 1 lock now.
@tryplot
Жыл бұрын
"you are using a deseku combination lock, it can be opened using a deseku combination lock"
@johndododoe1411
Жыл бұрын
I used an ABUS face shield during the pandemic. Virus didn't get through either . I've since trained my immune system on artificial copies of the SARS2 spike protein so I no longer need masks against it .
@iceymonster4675
Жыл бұрын
I love the gutting videos! Thanks LPL, these vids are the best!
@Mr.Unacceptable
Жыл бұрын
I've found those tweezers are handy for some things when soldering and desoldering. I keep a modified and a standard set around. Grind off the flat end and you have a good lifting tool for SMD parts. It lifts just enough to get both ends up quickly. A standard pair for the times you want to keep the part raised off the PCB a specific height for magnet wire under.
@kaasmeester5903
Жыл бұрын
Mauer did something similar, with a keyway that looks like two "M"s, one of them upside down. They also patented and trademarked that to prevent others from making key blanks.
@chrisdinger5100
Жыл бұрын
Love these kinds of videos. Show and tell with a break down.
@MickeyBerg
Жыл бұрын
Abus seems to make pretty decent products!
@alfredkugler3043
Жыл бұрын
They also make trash tier only marginally better than Masterlock.
@NunoI.
Жыл бұрын
Allthough you are correct in the patent issue, we found that some key profiles that are not patented, fit in patented systems... there for you can replicate the key... and abus counter that with the same profile key but with the Zolit mechanism, and its still hard to duplicate the key without an original blank, but its not impossible.
@barrier1002
Жыл бұрын
Someone please give this man a super challenge lock lol. Not that he won't defeat it just want to see if any video could last 6 or more minutes lol. Great pick LPL
@ThePretender1
Жыл бұрын
There is already a video of him picking some impossible locks from a while ago 😮
@johndemeritt3460
Жыл бұрын
It's always entertaining and informative to see LPL picking locks. But I'd love to see LPL picking lox. That's be interesting for an April Fool's Day joke video . . . .
@thisislilraskal
Жыл бұрын
haha yeah I know right, maybe a high security lock the government use or something from a bank
@Lyme_lyte
Жыл бұрын
There is a video where he visits BB and goes through BB's naughty bucket that BB is having problems with and opens all the ones he selects.
@bostonrailfan2427
Жыл бұрын
he won’t do it, he’s too busy bashing companies to actually pick a lock of his level
@coldwaterjimmy7044
Жыл бұрын
LPL you are amazing! First you talk about all the fancy stuff on the lock and the key and then you open it in less than a minute. 😂 I got to say I giggle whenever you talk about the lock and it's intricacies and then you tear it apart. You are the definition of making something look exceedingly simple but does take an extreme amount of practice and skill to do what you do? Thank you very much. 👍💯
@ThePretender1
Жыл бұрын
He said pick resistance then picks the lock in 5 seconds 😂
@AeroGraphica
Жыл бұрын
The attention LPL puts into avoiding fingerprints is enlightening !
@screeny30
Жыл бұрын
someone at Abus deserves a pay raise. LPL having a video, with more than 5mins and not destroying the brand.... wow, that is great
@tofadeisastart
Жыл бұрын
Nice and quick remembering the binding order
@allenshepard7992
Жыл бұрын
Thanks as always. Nice to see the lock taken apart. Yes, I have seen and remembered several CI shorts on you tube. The AD that comes to mind is the "Rocket" rake example. Might I say the ads seem more "skip the lock" than lock sport. Just my opinion and some feed back.
@justme5384
Жыл бұрын
Abloy does the same with their keys that still has the patent valid. You can only order keys from the locksmith with an plastic keycard that shows proof of ownership.
@johannesviljoen9656
Жыл бұрын
lockpicking, check. law, check. truly the most lockpicking lawyer video yet.
@qsdfcvgyjmkl
Жыл бұрын
More of these videos showing decent locks please!
@LuckyCashews
Жыл бұрын
That's a pretty neat lock idea
@jimmyyu2184
Жыл бұрын
"Very Well", that is high praise/compliment. Oh, also, did anyone read that Master Lock will close their Milwaukee WI plant?
@worldtraveler930
Жыл бұрын
Having the key spell Aabus, I think was a Real Nice Touch!!! 🤠👍
@troya2od
Жыл бұрын
I have missed the disassembly part of these and Bosnian Bill’s videos. Thanks!😊
@Danger_mouse
Жыл бұрын
Watching LPL do an earlier video on an Abus lock is the reason my dirtbike is secured to the rack with one any time its outside on my ute 👍
@IskandrsKnot
Жыл бұрын
Excellent and fascinating example.
@andersjjensen
Жыл бұрын
Spools alone makes the picking easier once you know the feedback of them. The alternating spools and "christamas trees" in my ASSA 700 however really messes with me. And because the tolerances are so tight I can change the binding order by swapping the driver pins.
@treeguyable
Жыл бұрын
Learned locks and lockpicking, 40 yrs ago, and realized, only needed to pick a few locks, for myself ,in that time. Things have changed, apparently, this can be addicting, especially when you become very proficient, plus, it becomes a lucrative on line business!
@communitycollegegenius9684
Жыл бұрын
This is some GREAT content. You truly deserve your success.
@loren481
Жыл бұрын
FYI on all the Abus 83 models I've seen (including this one) you can use the LPL T-pin + master wafer (#2 works for me) trick in pin 4 to brick the lock in the event of a picking attempt, if you want.
@dexhummer1
Жыл бұрын
Awesome LPL!!! A lock disassembled!! Sure miss some challenge locks!
@colorgreen8728
11 ай бұрын
“Require an experienced picker” someone may have gotten a raise for that one
@nealgold8442
Жыл бұрын
Great video and very informative.
@pathsleasttraveled
Жыл бұрын
I do like seeing that ABUS has drill protection in the core in the form of hardened pins. I have been a fan of the American series 700 for quite some time and ABUS is climbing up there with very appealing security features.
@michaelraney6732
Жыл бұрын
Anyone else catch that the awkward hand position was to avoid leaving noticeable fingerprints on the super shiny lock body. LPL is serious about his anonymity.
@corveroth
Жыл бұрын
Hah, I wondered if he'd hurt his hand, but that makes a lot more sense. That or reflections.
@hornsofdio6634
26 күн бұрын
the dissection of your subject pad lock is entertaining !
@donaldhoot7741
Жыл бұрын
You gutted! Cool! Please more gutting, I know it's probably boring to you but I love it! Great video!
@LordPrecision
Жыл бұрын
It's actually also implemented in CISA LIM profile
@drecknathmagladery9118
7 ай бұрын
i think the little detail of the keyway spelling ABUS thats a very subtle thing that id only expect LPL to see despite how easily he picked it. i think its cool to see that attention to detail
@NomadUniverse
Жыл бұрын
The shop I ran used to sell that lock with the standard core for $110. I took an order one day for 60 of them, with a 1 meter section of the 8mm square hardened chain for each, and 60 keys, all keyed alike. It was a government job and all up with the labor and freight it was something around $13,000. I got my two days wages out of that and that's it. Not even a thank you. Kind of soured me a bit cause I took the job for them and the price gouging in the industry is part of why I didn't stay.
@_BangDroid_
Жыл бұрын
100 years of ABUS coming soon next year, be interesting to see some centenary edition locks
@jimbrown9885
Жыл бұрын
If that keyway is trademark protected, that is freaking brilliant.
@Benoit-Pierre
Жыл бұрын
you can still build compatible thinner blancs that will fit without circonvolutions
@Derek_King
Жыл бұрын
Love the tear down videos. Please post more of them.
@Benoit-Pierre
Жыл бұрын
this channel is not about feelings and emotions. He posts gutting when they bring new details not shown in previous videos. this gutting is almost boring.
@CADClicker
Жыл бұрын
@@Benoit-Pierrecringe
@vaderdudenator1
Жыл бұрын
Heck yeah, we’ve missed the full tear down videos 🙂
@MajorHavoc214
Жыл бұрын
Wow, a decently made padlock. Thanks for all the work. Yep, I can tell a master when they make videos that make lock picking look easy.
@erg0centric
Жыл бұрын
Key blank available from China next week.
@FU2Max
Жыл бұрын
Love the way the explanation took longer than picking the lock
@zeanyt2372
Жыл бұрын
On a bit of side note. Those tweezers will be great for small screws and electronic components.
@LadyAnuB
Жыл бұрын
So these tweezers follow Alton Brown's kitchen mantra, no single-use tools other than a fire extinguisher
@OcteractSG
Жыл бұрын
It’s good seeing a competent pin-tumbler lock for a change. Abus could do more, like vary the spring tension and throw in some serrated key pins, but that’s crossing over into challenge lock territory. Not that that is bad, but the current pinning is already reasonable as it is.
@therightarmofthefreeworld4579
Жыл бұрын
Always humbling to watch you pick a lock so quickly 👍
@PocketWomen
Жыл бұрын
Such a beautiful padlock. Shame the binding order was straight through the lock, these are fun to pick. Cheers
@MultiPureEnergy
Жыл бұрын
The binding order would be a bit more complex if it had a couple more serrated pins mixed in.
@ericcarabetta1161
Жыл бұрын
It just cracks me up that even a fairly well-made lock only takes him, like, ten seconds.
@KZ-bx3dp
Жыл бұрын
Nice feature is slot on side of the core wich helps to change key-pins without disassemblying whole core.
@chadoftoons
Жыл бұрын
Very creative use of trademark laws which are saner then copyright laws anyway. They had to go out of their way to design it like this and could even market on it later
@thaphreak
Жыл бұрын
That's a really nice lock, I wouldn't mind owning a few
@achillies40
Жыл бұрын
Up for 6 min and there have already been 1600+ views. Awesome.
@SnakeSnack
Жыл бұрын
"A clever idea" wow, it managed to impress the lawyer part of him, abus should be very proud.
@Pyrolock
Жыл бұрын
Bravo, an actual gutting -- haven't seen one of those in awhile
@cdixy302
Жыл бұрын
Wow first time i was this early master lock was a good security option
@terry_willis
Жыл бұрын
I usually jump forward during picking to get to the gutting part. Man did he pick this one fast!? I had to back track several times to get to "and we got this one open".
@chuck6290
Жыл бұрын
That Abus keyway is actually amazing
@jimmahr.4665
7 ай бұрын
I bought Abus way back because it was a salt water resistant lock, gotta say it's still operating like new hanging on the back of a semi trailer.
@roysammons2445
Жыл бұрын
Most of us would go back and forward through the stack a couple of times before getting the open. LPL slips through the stack just the once, it's like the lock knows who he is, so just gives up 🤣 You do have to love Abus locks, they look good and are built well.
@andymontoya
Жыл бұрын
Praises them and proceeds to open it in less than a minute
Пікірлер: 832