hilarious - I have been looking at all these testers the past few days. Thank you for doing these videos, the reviews are very informative. I appreciate that you are to the point with these testers, no beating around the bush. Pure experience to honesty to the functions it says it should provide.
@stewartclark3259
11 ай бұрын
I'm astounded at the value! that much performance for $25 is really good. Even with a 200kHz analogue bandwidth (which I'm sure is limited by an input filter that could be 'adjusted'😂, it's really great for situations you mention. Heck, you could even use it to explain aliasing and digital down-conversion with a 455KHz IF AM radio. How to use a scope and how to interpret the waveform is 80% of mastery. I'd pay an extra $5 for a trigger input that doubled as a 1-ch logic analyzer. Really cool!
@surferdudemi
11 ай бұрын
Bandwidth is likely limited by the internal A/D sample rate, so while you might be able to "adjust" the input filter, you would not gain much in terms of performance.
@jimomertz
11 ай бұрын
Might be useful for checking Hall effect sensors on my car. Wouldn’t want to drag my expensive oscilloscope out to the garage and risk getting it all dirty or broken.
@MrMersh-ts7jl
11 ай бұрын
I'm an auto tech and having a really cheap one channel battery scope is very useful.
@E-Box
11 ай бұрын
You definitely don't want your scope turning into one of those "pulled from working environment" eBay units where the "working environment" seems to be under the hooves of many cows in a barn.
@DrFiero
11 ай бұрын
Exactly what I was going use one for! See if your cam sensor is pulsing (or whatever), and it's plenty fast enough to check if the CAN bus is alive.
@AnnaVannieuwenhuyse
5 ай бұрын
This one won't even get dirty, 'cause it fits right in your front pockets!
@stefanberggren770
3 ай бұрын
Would this too work to check pickup coil AC voltage on a motorbike?
@iowahank1
11 ай бұрын
Great ringtone. Oh, and the scope is a nice upgrade from a DS0138.
@victorsteerup4582
9 күн бұрын
I must have gotten the next generation of this $20 scope on 07/25/2024 from Banggood. It has two inputs at the top, DSO and DDS, and it displays the stats at the bottom of the screen. Happy with it.
@scottdrake5159
11 ай бұрын
Wonderful video! All of your videos are great, and yours might be the only YT channel that I can say that about.. This fulfills another wish I had, besides low cost. I am excited for more scopes, or other instruments, that don't need to connect to mains.
@IMSAIGuy
11 ай бұрын
Thanks Scotty. Good to see you are still a viewer!
@NitroNuggetTV
10 ай бұрын
I think this might be an ideal tool for setting gains on audio amplifiers. Cheap and cheerful. Useful video, thank you.
@_N4VE_
Ай бұрын
bull shit, i’ve been trying and can’t get the sine wave to show like other people do
@albertolopez07
4 күн бұрын
@@_N4VE_ at first i couldn't get it to read either but eventually i got it to work and it does the job. Don't use auto, try manually using different settings until you get it to read.
@yurkshirelad
11 ай бұрын
For $25 a beginner can’t go wrong for basic electronics and audio work.
@__--JY-Moe--__
11 ай бұрын
U'r fired! 5min early! looks perfect 4 any small electronics sampling & testing!
@alklapaxida850
11 ай бұрын
I CANT BELIEVE ITS 25 BUKS ! waw that blows my mind, this unit is great for on the car use or under bonnet stuff wear you get it covered in oil and soot so many uses such amazing value when i was a young dude i would fantasize about oscilloscopes and could not get one ...
@leandrolaporta2196
11 ай бұрын
I did a review of this a month ago in my channel and I really liked it, it is fast for the price! For audio usage and mains measure (using the 10x probe obviously) is quite neat!
@theprogrammerrolandmc3039
6 ай бұрын
your comment is against KZitem rules just provide a link next time why are you trolling other videos
@paulperano9236
10 ай бұрын
I would have drooled over this when I was starting out in the late 70s !
@paulsherman51
10 ай бұрын
I did. And the drool immediately evaporated when landing on the tops of the vacuum tubes of my first 70s scope. This tiny thing would have been Unobtanium.
@marphymarphy
11 ай бұрын
For 25USD its a great tool. U can check switching power suply, U can check comunication between PCH and BiOS chip, U can check linaerity of Ur suply, U can do many things. Especialy U can teach how to measure with osciloscope AND it is on battery, so U are out of grounding👌🏻
@byronwatkins2565
11 ай бұрын
At 8:00, the vertical ranges will probably depend on the probe attenuation. At 9:40, triggering wasn't a problem -- the pulse train was stationary; the problem was the sampling frequency beating with the pulse frequency... instead of sampling at the peak it sampled half-way down on each side during some traces.
@surferdudemi
11 ай бұрын
There's also noise and possibly some quantization error at that scale (200mV)
@S13Slydeways
7 ай бұрын
Ty for the unbias review! I bought for exactly the reason of room/shop swapping. Ill program in my comfy room, when i need to quickly check low freq comms, or even just snap shot a voltage reading and a curve. ill use this. Would hate to drag out the riglol on a field mission to just to confirm its dacing and not dead. Haha
@pham3383
Ай бұрын
i have been using this,this is enough for me with bachelor level of electronics,small,cheap,not even half bad comparing to those expensive ones
@reiisthebestgirl
10 ай бұрын
This seems like fine companion to Hantek 1008 I have used for years to work on cars. Single channel and sampling rate are limiting capabilities but it being small stand alone device is great to get a quick read from some sensor when you dont want to set up the Hantek.
@surferdudemi
11 ай бұрын
At 9:20, it appears the problem with the sync pulse triggering is not the scope: it's either that the amplitude of the pulse varies, or (at 200mV / div) you're getting quantization error on the signal. That would make it appear to shift slightly. There also appears to be a little noise in the signal which could make it appear to shift.
@hunterwilliams2833
11 ай бұрын
Could be useful cause it’s not connected to mains ground. Being new to oscilloscopes and not having to worry about shorting out parts might be good.
@koenlefever
11 ай бұрын
9:02 When you started talking about a "sync pulse" before zooming in, and I just saw the spikes, I assumed for a moment you were talking about some synchronization pulse. Then you zoomed in and I recognized the function as a "sinus cardinalis" sinc(x)=sin(πx)/πx, and I understood you were talking about a "sinc pulse" rather than a "sync pulse". BTW, according to the cc subtitles you talk about a "sink pulse", which briefly added to the confusion.
@aaax9410
11 ай бұрын
I learned without an oscillicope but i use em now ha
@stevenspmd
11 ай бұрын
Wonder if its source is open like the original DSO Shell ?
@onesikm3
9 ай бұрын
So what is the crosshair “trigger” you referenced on the sides ? I thought it was going to let me shift the wave along the “Y” axis but it does not ? Basically I’m trying to use this for checking a 40hz sine wave for setting my amplifier gain but I’m not able to keep the image within the confines of the screen? I’ve tried to slow it down and get it the smallest but it’s not helping🤔
@gigas27
9 ай бұрын
Funny enough had the same issue today when i thought this would work. I'm at a loss and looking for answers too...
@garylcamp
2 ай бұрын
Actually, it did say it was calibrating on screen but it was brief. Watch your video. I just got mine today and it looks great. I wish you would have gone to a little more detail. I cant get to connect to my PC (W10 sees it but says it is malfunctioning). The instructions are not at all clear to me. And I would like to update the firmware. Some other youtuber fixed an old Commador 64 with 4 problems using this. And I would like to see if this DSO152 would project to the PC screen. Thanks for the review.
@Joe_Blo
2 ай бұрын
The case looks a lot like my 35y old Humminbird Fish Finder
@brianmccafferty1470
2 ай бұрын
I bought one to try to iDenify the wires for my obd2 connector. The port broke apart in my hands!
@glenncummings1326
11 ай бұрын
Surprised you didn't adjust it for a nice square wave
@FloydThomasIII
6 ай бұрын
I bought this to simply test the sine/modified waves for inverters as some of the more expensive ones are listed as sine when in fact they're not. Still trying to figure it out though.
@IMSAIGuy
6 ай бұрын
inverter companies lie all the time
@restfulplace3273
3 ай бұрын
This is the very reason I’m looking. Now I need to know if this has enough resolution to be useful.
@FloydThomasIII
3 ай бұрын
@@restfulplace3273 It worked for my needs. Just remember that there's a switch on the side of the probe.
@niteman555
7 ай бұрын
Nearly forgot what a sinc was, I thought your generator could somehow generate a standardized vsync or hsync pulse😅
@gabaradama144k9
6 ай бұрын
Can you use this to check Main ‘s voltages?
@neonpop80
8 ай бұрын
Can I hook this up to my synths?
@philh9238
8 ай бұрын
Can you use any bnc scope leads? I have a pico lead but not sure if it would fit? I want to use it for automotive sensors and can bus etc but not crazy on the short lead’s like in the video
@IMSAIGuy
8 ай бұрын
should be able to use any BNC cable or probe
@philh9238
8 ай бұрын
@@IMSAIGuy They have a 1 channel scope for 200 but this thing is worth the gamble for 30 bucks in the automotive world.
@philh9238
8 ай бұрын
How would you go about the probe calibrating if you use different leads that don’t have the adjustable screw??
@IMSAIGuy
8 ай бұрын
@@philh9238 you will just have to live with the inaccuracy. for auto work that shouldn't be too bad
@ivolol
11 ай бұрын
1Mhz would be nice, so you can look at boost / buck switchers. I would spend a bit more money for something you knew could do that. Yes it's a slippery slope of how fast to go, but eh these bare-CPU-ADC oscilloscopes are getting a bit old hat, and the interfaces are all sad to work with
@tonypitsacota2513
7 ай бұрын
Hahahahaha.... "Won't Get Fooled Again" is a great spam ringtone you have....
@IMSAIGuy
7 ай бұрын
Baba O'Riley
@tomperli4513
5 ай бұрын
Yust a teenage wasteland 😂 @@IMSAIGuy
@Manf-ft6zk
11 ай бұрын
I could think of high voltage experiments with high voltage probes where I would risk just 25$ to have look at the signals.
@JimmyKay1976
2 ай бұрын
Can this detect the positive and negative of an audio capacitor?
@roelandriemens
11 ай бұрын
Now you don't need your Rigol anymore.😂
@DrFiero
11 ай бұрын
For the price - it's amazing. As usual, it's the 'right tool for the right job'. You're certainly not checking the clock on a 5ghz clock signal with it. Wrong tool. It's WAY cheaper than the first 'cheap' DMM I bought in about 1979. Factor in inflation?! OMG.... SO much cheaper. Still have that meter BTW!
@jeditoto3441
11 ай бұрын
Great video- was going to buy one , but looks really crappy
@IMSAIGuy
11 ай бұрын
that is why I make these videos, so you don't waste your money if this is not for you.
@pkp8559
8 ай бұрын
They have Chip Manufacturing facility. Its Most important thing..
@nikthefix8918
8 ай бұрын
Do you know which processor it's using? Could make a great dev machine if it's hackable. Nice ergonomics. You'd pay more than that for a decent production quality project case. Edit: Found it. CH32F103. It looks like there's a UART header too so the STM32-Arduino framework might be worth experimenting with.
@pkp8559
8 ай бұрын
@@nikthefix8918 AliExpress some European put review photos with opened view. from there i understand FPGA chip company started 2014 have their chip used.
@magnuswootton6181
5 ай бұрын
theres going high hz, but how low in hz does it go.
@IMSAIGuy
5 ай бұрын
6:50
@yornotelppa
11 ай бұрын
Why are his prices always low? In this case it's not $25 it's at $33.
@IMSAIGuy
11 ай бұрын
did you do a search?
@yornotelppa
11 ай бұрын
@@IMSAIGuy just clicked your link.
@IMSAIGuy
11 ай бұрын
do a search I found $21
@halamkajohn
14 күн бұрын
rc/servo pulses
@suyutnoputra4055
6 ай бұрын
Saya beli dapat 1bulan rusak
@JuanSanchez-ik7wx
8 ай бұрын
120 vac would have been something a smart guy would have done.
@IMSAIGuy
8 ай бұрын
220 vac would have been something a very smart guy would have done
@JuanSanchez-ik7wx
8 ай бұрын
@@IMSAIGuy unless you have a broken neutral wire in your box. But you wouldnt know the repercussions of that.
@jeffreywyke368
11 ай бұрын
Too bad it's from Bangbad
@sammin5764
11 ай бұрын
👍🌟🌷🌟
@briansauk6837
11 ай бұрын
Even in the space of cheap crippled pocket scopes, this looks terrible. Pass.
@kenbakker3241
5 ай бұрын
Might I suggest that you oil your squeaky chair.
@IMSAIGuy
5 ай бұрын
I'm buying a new one. tried to fix that one way too many times
Пікірлер: 90