Holy crap!....you really kept my biscuits from burnin....and that amazon link fer that pivot tool was super.....thanx
@spaight711
2 жыл бұрын
Thanks, bro. The more people show me how they did it, the easier it is for me to do mine.
@TheBlazerBeam
2 жыл бұрын
It can seem daunting but, for the most part, just doing it is pretty easy to figure out. This was the first time for me and I just wanted to help others figure it out with me
@stoneshrink
Жыл бұрын
thanks for documenting this... I've done dozens of columns - and each seem to have their own puzzler. Love seeing your take on this
@justin________7477
2 жыл бұрын
Thanks, this was really helpful. Needed to get the steering shaft out of the column on my 81 Camaro for electric power steering conversion.
@TheBlazerBeam
2 жыл бұрын
Glad I could help!
@mikegellner2253
2 жыл бұрын
Good video ! Had a chuckle when you paid up for the pin removal tool when a couple of #8 screws would do the same thing for about 30 cents !!!
@Tarheelnative
2 жыл бұрын
Bad@$$ man, Been around squares for most of my adult life so you have helped a lot of folks i learned along time ago but you have hit the nail on the head and its great to see such a great video
@opaleirosolitario4497
2 жыл бұрын
Hello how are you? I'm from Brazil! My Opal (GM of Brazil), has the same steering column, and your video will help me a lot! Thank you very much!
@TheBlazerBeam
2 жыл бұрын
So glad I was able to help! Nice to hear from our Brazilian friends!
@49BigPoppa
2 жыл бұрын
Just so you know if you ever lose some ball bearings, they are 5/32” I just ordered some for my rebuild, I’ll be watching your video, awesome step by step
@TheBlazerBeam
2 жыл бұрын
I’m glad I could help! I finally got it installed and have that video coming out next week
@edpowell9968
11 ай бұрын
Where did you order ball bearings from, can you order them already in the housing, I think my housing is bad
@rogeliorodriguez5427
Жыл бұрын
Thank you my guy.
@DoggyDogYT
5 ай бұрын
Dang it! I want to change my setup to electric and rid myself of the P/S pump, but I need to place the electric module inside the cab, and it looks way more complicated than I thought :(.
@theresabouray552
Жыл бұрын
I put a wiper bypass one stroke on the floor
@robertfernandez7413
5 ай бұрын
Bad ass vise
@taylorsopko5807
2 жыл бұрын
I got the pivot pins out on my g body Cutlass by running in self tapping screws and prying them out with 2 wrenches only because someone stripped them out before me saved me some heart ache otherwise use the tool
@kaneholcomb5358
Жыл бұрын
My 84 c10 has whipers on the steering column and not the dash and I also have powered windows. And I've seen 86 c10s with manual windows so I just think it depends in what package you got for your truck back in the day when they came out.
@toddstevahn3526
8 ай бұрын
Do you have a place to get new replacement parts
@mitchellbutler3517
2 жыл бұрын
Great video! I'm currently putting a 1983 back together and can't figure out how that actuator rod goes back, do you have any advice?
@TheBlazerBeam
2 жыл бұрын
It depends which actuator rod you’re talking about. There’s a detailed pdf on the crankshaft coalition website showing all the pieces and how they’re situated. It was a big help to me when I was doing my rebuild.
@4THAFALLEN
Жыл бұрын
How did you remove the plat that bolts to the firewall?
@TheBlazerBeam
Жыл бұрын
The plate comes apart in two pieces. There are 6 or 7 bolts around the edge of it but once you get them all out you can pull the lower part of the plate and it should disconnect. There are some rubber tabs from the gasket you’ll want to push out of the plate but then you should be totally free.
@Tarheelnative
2 жыл бұрын
13:50 I think she asks that LOL😂
@smokeydabeecharlescoleman8365
2 жыл бұрын
So hard watching you destroy the very thing I need for my k10,lol.Please tell me i can buy the extra parts from you.
@TheBlazerBeam
2 жыл бұрын
What parts are you looking for? I have a full manual steering column and a full automatic column. Both are non tilt though.
@TheBlazerBeam
2 жыл бұрын
And don’t worry, I put it back together!
@smokeydabeecharlescoleman8365
2 жыл бұрын
@@TheBlazerBeam I saw, over and over. The one thing I needed help with was that last collar separation. After a few blood blisters and 10 other videos I finished the teardown. Turns out I did not break anything, but I never would have attempted this without your video. Looks like I can get the parts I need new, but thank you. Who new this thing took a jeep bearing at the base ,lol. Great videos.
@hondaman4423
2 жыл бұрын
You have some good info I think, but I can't see anything. Your camera is potato quality terrible.
Пікірлер: 31