Dude, you saved my bacon. I got in a jam trying to replace my turn signal switch, this video showed me where I messed up, and it's all sorted now. Big thanks!
@unclebucksgarage7695
Ай бұрын
VERY HAPPY THAT IT HELPED.
@herculesinwyoming
Жыл бұрын
Uncle buck is a car guy! It took me a while to figure this out. I bleed 10w 30 myself. ❤
@unclebucksgarage7695
Жыл бұрын
LOL have a great weekend
@herculesinwyoming
Жыл бұрын
@@unclebucksgarage7695 I saw the hat on another video 😉
@unclebucksgarage7695
Жыл бұрын
yep
@Edgarbopp
2 ай бұрын
Very helpful. I’m working on the same thing.
@unclebucksgarage7695
2 ай бұрын
Glad it was helpful!
@bearsstuff
Жыл бұрын
Tearing apart an 84 column right now. This was useful for my first time. Looking forward to the next video on this column.
@unclebucksgarage7695
Жыл бұрын
I think your going to like it, have a great weekend
@warrenvinansky4771
Жыл бұрын
Nice work especially when you have the right tools
@unclebucksgarage7695
Жыл бұрын
thank you very much
@Eightupman
2 ай бұрын
2:10 the flat part of the puller goes out so the heads of the bolts stay flat. 😢
@Eightupman
2 ай бұрын
3:43 it's bent because you have the puller plate on upside down.
@fernandoramos7597
3 ай бұрын
That is a wonderful video step by step instructions Thank you so much God bless you
@unclebucksgarage7695
3 ай бұрын
You are so welcome
@thewoodsman5261
Жыл бұрын
Ahh the goid old days when there were no airbags
@unclebucksgarage7695
Жыл бұрын
YOU BETCHA
@jcanfixall1585
7 ай бұрын
At 3:00 it's not "tweeked" cause it was on so hard, it's cause you have the puller on backwards!!!
@unclebucksgarage7695
7 ай бұрын
LOL yeah i figured that out. Have a great week
@loboxx337
2 ай бұрын
Sure is...good eye.
@felixcalderon574
6 ай бұрын
Very good job thanks
@unclebucksgarage7695
6 ай бұрын
So nice of you. Have a great weekend
@martinolivas319
24 күн бұрын
Hey brother, I’ve got a 1976 Silverado with the tilt steering column and for the life of me I can’t get the new ignition switch adjusted to where I can both fully crank and all the way turn back for the accessories. I have to pick one or the other obviously The crank position but brand new ignition switch brand new turn signal brand new everything thinking maybe the ride desert cylinder is not getting pushed to the extremes all the way forward all the way back. I don’t know if that’s possible, but I definitely appreciate that. You would have to get an order for me to, get this admission adjusted properly or potentially extending the range of the rod
@unclebucksgarage7695
24 күн бұрын
Thats atough one, i wouldn't know exactly what to do with it without looking at it for myself, good luck
@duanemmitry8370
Ай бұрын
Hello. What kept the steering shaft from sliding up and down the column while you worked it on a bench? I am rebuilding a 82’ that is still attached in the truck but the shaft slides up/down about an inch making it where I don’t need compression tool when installing the plate and ring. Any help/ advice would be greatly appreciated!!
@unclebucksgarage7695
Ай бұрын
It should not move like that. Something is wrong
@duanemmitry8370
Ай бұрын
@@unclebucksgarage7695 that’s what I thought but can’t figure out what. Do you have any thoughts what it may be? Thank you
@unclebucksgarage7695
Ай бұрын
ACTUALLY WITHOUT GETTING MY HANDS ON IT NOT A CLUE
@Frma-ro7sh
Жыл бұрын
You skipped the same parts as everyone else the rod and rod for actuator for dimmer
@grantslater2485
Жыл бұрын
Doesn't have a rod, dimmer switch is on the floor
@unclebucksgarage7695
Жыл бұрын
yes that rod is in the newer models, my truck has the foot switch
@loboxx337
2 ай бұрын
Foot switch
@lookyluwe
8 ай бұрын
I had to replace my ignition sector gear on my 77GMC High Sierra along with cylinder and ignition. When I tried to connect the ground cable. the horn would go off. What did I do wrong? Please reply. Thank you.
@grantslater2485
8 ай бұрын
Check the button isn't contacting the column
@lookyluwe
8 ай бұрын
@@grantslater2485 are you talking about the locking button?
@lookyluwe
8 ай бұрын
Are you talking about touching the locking plate
@grantslater2485
8 ай бұрын
No the plastic ring in the horn assembly make sure it is not cracked or making contact
@lookyluwe
8 ай бұрын
@@grantslater2485 thank you I'll check that out tomorrow.
@jcanfixall1585
7 ай бұрын
The funny part is you took the column apart just to fix that!!! And I'm the idiot who watched this whole video...
@grantslater2485
7 ай бұрын
Thanks
@unclebucksgarage7695
7 ай бұрын
Thank you so much for watching the whole video! I appreciate your support and hope you found some enjoyment in it, even if the outcome wasn't what you expected.
Пікірлер: 45