Thank you just completed a solo mission dropping the tank and this video really clarified what a lot of videos lacked. Thank you my brother and my truck green too :)
@darkdelta
2 жыл бұрын
Nice move with the folding chairs, cuts down on back and knee stress, Thanks, Not sure I'd come up with that on my own. You helped an old man today, me.
@joeltysver6811
2 жыл бұрын
Thank you for doing it the right way and NOT cutting a hole in your bed. I see all these videos of people doing that without realizing how badly it effects the structural integrity of the bed. Don't believe me? Drop a brick on your 'access' flap and see what happens. Also applies to couch or table legs. It was at least a thousand dollar deduction at the dealership too. Good job but please get yourself some electric ratchets Tony. Rigid stuff works great and I have adapters for 1/4" 3/8" & 1/2" sockets.
@klizzyykicks1712
Жыл бұрын
Why can’t u just weld it back up ? Integrity would return
@cj8172
2 жыл бұрын
Well done man, dropping the tank plus all the camera work, good job.
@how-2-tony145
2 жыл бұрын
thanks I'm trying to show a more realistic side of the jobs so people won't be as intimidated.
@melissaebling3008
5 ай бұрын
Thank you! I was able to get my tank dropped without taking the bed off 👏
@lexpro2239
7 ай бұрын
OBS baby, OBS
@daniellands
Жыл бұрын
Jesus loves you very much
@843LoJb
7 ай бұрын
Jesus loves you more than
@DanielBelmontes-hp2hk
3 ай бұрын
😂
@tonyalopp1730
3 ай бұрын
❤❤❤❤❤Jesus loves you MOST😊
@jro6070
2 жыл бұрын
Good video. About to tackle this over the weekend on my 95'. Try Kroil Oil, you won't ever try anything else. It is good $hit !
@CRAZYBUILD349
2 жыл бұрын
thank you man, your a big help!!!
@georgep-v9005
2 жыл бұрын
Thank you for showing what reality looks like when doing these jobs. Earned a sub today, gotta replace the whole tank on my k1500 cause a rust hole but you just saved me a headache, so thanks!
@jakegarci5693
2 жыл бұрын
Thank you!! Great how to video detailed enough to make the job easier my props to you
@mikebaird6788
9 ай бұрын
Just recently I had to replace my tank 1988 GMC k 1500 newer body style had a 25 gallon in it I ended up going up to it 35 gallon it fits for regular driving and everyday use but this was a long bed regular cab pickup so there's room
@thedukeofarchibauld
Жыл бұрын
Where's the rust at??! Thanks for the help man.
@bdwren
Ай бұрын
Goggles will work better than the glasses
@jamesm568
Жыл бұрын
I found it easier to remove the bed.
@emilytomulty2722
Жыл бұрын
Thank you! First time doing this job, need to cut of the forward strap…bolt is so badly corroded. Very good video, cool as a cucumber!
3 ай бұрын
These chevys have a real bad rust problem especially the pre 96 trucks and they were built cheap.
@kellismith4329
2 жыл бұрын
It’s a good video, I have 2 of these trucks and have had to replace both pumps - I opted to undo the bolts and hardware from the bed and use a comealong and small scaffold to lift the box off, then you can work on the gastank easily
@donjuan4925
Жыл бұрын
Muchas gracias Toñio 🍻
3 ай бұрын
The hose fittings can be very rusty. Pull the truck bed off.
@Bullet91
Жыл бұрын
I need to do this my tank is bad what gallon size is that tank
3 ай бұрын
If you need to take the bed off, replace the pump.
@angelmedina7738
2 жыл бұрын
remove fuel lines at gas tank 1998 Chevy pickup
@13634landing
4 ай бұрын
Thanks for posting. 🍻
@DIXIEMAFIA251
7 ай бұрын
What’s up Tony?! I am literally dropping my fuel tank now as we speak…Just came across your video! I am your newest subscriber! Great video and to the point! Btw,How is this pump holdin up these days?! Hope so!I look forward to much more content from your channel! With Love from Gulf Shores,Alabama!! ~ROLL TIDE~
@utahyork3338
2 жыл бұрын
I've used my ratchet as a hammer many times. That retaining ring gave me a little trouble, but eventually came off.
@darkdelta
2 жыл бұрын
Every tool has a hammer side!
@fpsnashamdan7362
2 жыл бұрын
Why GM and some other manufacturers stopped using the old fantastic reliable metal gas tanks ???
@fauxque5057
2 жыл бұрын
Rust
@MacAutoDiag
2 жыл бұрын
Reliable? Please
@CC-xs1hh
Жыл бұрын
Same reason you cannot find metal gas cans....condensation
@phillipisaacson5931
Жыл бұрын
Plastic is better when dealing with flex fuel/e85
@eternalthread7846
4 ай бұрын
Metal is a horrible material for gas tanks, moisture and corrosion usually end up killing fuel pumps or fucking up the fuel system, fuel cells are the only things that should be metal
@treybutler3766
5 ай бұрын
Now how do You get it back in by yourself lol
@Ridesmoothbrother
3 ай бұрын
Excellent video Tony. Thank you
@cybergrindin
Ай бұрын
U did show shit. Camera 10 feet away when u takin out pump 😢
@danlafond6905
8 ай бұрын
Awesome video
@Watchout1010
2 жыл бұрын
Years are incorrect-87 to 95
@Chevy4Life350
Жыл бұрын
87 was the last year of the square bodys and the obs lineup went from 88 to 98
@juancarlosgarciaalarcon1677
2 жыл бұрын
Cual es el orden de encendido de Chevrolet Silverado americana 4x4 v8 motor 5.7
@how-2-tony145
2 жыл бұрын
1-8-4-3-6-5-7-2 en las que yo e trabajado.
@fauxque5057
2 жыл бұрын
@@how-2-tony145 I memorized that firing order when I was a kid and 40 years later I have never forgotten it
Пікірлер: 48