One really good piece of advice, put at least 6 gallons of gas in a brand new tank with a brand new fuel pump. I spent a day and a half wondering why my new tank and new fuel pump wasn't working. It just wasn't pushing gas out of the fuel pump. I had 4 gallons of gas in there. I thought that was plenty as it was covering the bottom of the fuel pump. But what I found out is, you need more than that to pressurize the system so it will prime the lines and everything. I was almost ready to take the fuel pump back. I decided to put a couple more gallons of gas in there and everything works perfectly.
@danielhucklebridge5006
Жыл бұрын
I've changed front pumps in those trucks before. I just lower the tank about 2-3 inches, and the slanted contour of the tank makes it possible to pull the pump out.
@crbourret
3 жыл бұрын
I love the floor in your garage!
@UncleRobsGarage
2 жыл бұрын
That's my favorite way.
@Robin-bv4is
3 жыл бұрын
I have a 91 f150 5.0. I'm trying to change the valve cover gaskets closer to the drivers side. There is a wire harness type thing attached to the top of the valve cover. Can you tell me how to get it off? The bolts are off it's just got this locking metal clip inside the plastic that will not free up. Any suggestions? Btw my son and I removed the bed about a month ago and replaced the fuel pumps. We are in Tampa so if you get bored and would like to help us for FREE we wouldn't argue with that....lol
@devonmcintire7652
Жыл бұрын
How’d your get the trailer light harness disconnected? I need to get that undone so I can get my bed off
@kevinscarrescue6864
Жыл бұрын
Mine had a plug ahead of the rear bumper to the left of the spare tire.
@drannonbrown8102
2 жыл бұрын
Ok what size socket did you use for the bed bolts?
@jf5016
2 жыл бұрын
It's 18mm
@87Lowbird
3 жыл бұрын
How much did the carriage bolts on the bed fight you??
@kevinscarrescue6864
3 жыл бұрын
Not at all. The truck has always been in central Florida so there was no corrosion to fight. My impact wrench helped a lot too.
@mattreyes79
2 жыл бұрын
@@kevinscarrescue6864 Nice. I've seen people ask about removing the bed and how the bed bolts can strip, break off, etc. from removal. I've been spraying my bolts down every few days so hopefully that helps me get them off without destroying them.
@mattreyes79
2 жыл бұрын
@@kevinscarrescue6864 I want to use an impact wrench as well. After taking a look at my bolts I'll need to get some good attachments to reach under there. Some are not a straight up shot to get to. Which extensions did you use to get those off?
@kevinscarrescue6864
2 жыл бұрын
@@mattreyes79 I also have a 3’ extension I picked up at a garage sale. It worked perfectly.
@jesusruizroque8483
2 жыл бұрын
Ola no sé si saben español pero mire su video y me gustó quisiera saber porque mi troca no enciende es el mismo modelo que la que estas arreglando
@kevinscarrescue6864
2 жыл бұрын
¿cuales son los sintomas? ¿Es la bomba de combustible con la que tiene problemas o el motor?
@jesusruizroque8483
2 жыл бұрын
@@kevinscarrescue6864 sorry no se predio pero otro día nada
@augieh6146
2 жыл бұрын
Hey I have the same color f150 lol
@kevinscarrescue6864
2 жыл бұрын
It’s a beautiful combination.
@augieh6146
2 жыл бұрын
@@kevinscarrescue6864 everyone in town knows me and I won’t get another truck as long as this one goes down the road. It’s an old clunk lol but I’d rather put my money into it rather than anything else because of the sentimental value. First truck at 16 and maybe my last lol.
Пікірлер: 20