Whoever designed a pump inside a tank, without access, is a genius. especially when these are notorious for failing.
@angelotillas9782
Жыл бұрын
Good job, James was outstanding. He is a really good mechanic, you guys must have truck owners lining up for work.
@Me-dh5go
5 ай бұрын
Outstanding, no shaky cam, no over blown explanations, to the point and got it done. Kudos to the boys, they were great. Just a suggestion, use a brass punch to loosen the locking rings next time. It's just me, but sparking up isn't fun.
@BenFierro79
5 ай бұрын
Thank you
@ffhasselhoff
Жыл бұрын
Just wanted to say thanks for giving me the knowledge and confidence to tackle this job. I replaced both of my fuel pumps following this video. Saved a ton of money by not taking it in to the shop and I upgraded my bed bolts (access from the bed) to make it easier if there is ever a next time. Thanks for making this video!
@BenFierro79
Жыл бұрын
Thank you, glad this helped
@drefun9249
Жыл бұрын
How did you upgrade your bed bolts?
@CH-cd5um
10 ай бұрын
Thank you for this video, taking the bed off is much easier than dropping the tanks.
@BenFierro79
10 ай бұрын
Thanks for watching
@Cherokee93
5 ай бұрын
I disagree
@roberthayes5037
Жыл бұрын
Outstanding! Taking the bed off is easier than taking the tanks off. Great job.
@kennynewell85
2 жыл бұрын
Thanks for the video. Doing my front pump tomorrow. Wish I had an extra hand to remove the bed. Just going to drop the tank.
@zaczanenghi5240
Жыл бұрын
Nice video. Great to see father and son working on the truck
@BenFierro79
Жыл бұрын
Thank you
@Dave52732
9 ай бұрын
I have this "opportunity" in my immediate future, thanks for the demonstration, time to order fuel pumps...
@mickarps4397
Жыл бұрын
Great video. Busted loose bolts today, bed off next weekend looking for leak and will change out fuel pumps while there.
@davidreynolds4684
Жыл бұрын
I'm surprised the butt connectors weren't marine shrink insulated. Good video. I've done several of these. Bed off and bed on. The bed off jobs were no fun but I wasn't doing two at the time.
@JohnSmith-cf4gn
4 ай бұрын
I had to replace both fuel pumps on my 1990 F150. Had to take the bed off to do it. Great engineering Ford. 🙄😁
@esegoldberg
2 жыл бұрын
Great video sir. I like the idea of removing the bed to access the tanks instead of trying to do all the work from underneath. I'm also debating on whether to order the tanks with fuel pumps already installed. I have a couple of months before I have to make a final decision(I plan on renewing the Texas Inspection and License plates before I get it repaired.). I might have the bed removed first to see if the gas tanks are good enough to where replacing the fuel pumps will be enough or if the gas tanks are bad to where it's better to replace the tanks and fuel pumps. Again, thanks for taking the time to make this video...:)
@ebaht7468
2 жыл бұрын
Awesome video i hate tight spaces and i have to replace both pumps this video just took a load of stress off my mind and no dealing with emptying my full tanks ! Ima just remove about 5 gal each just in case give myself wiggle room lol
@dronejunkie2951
Жыл бұрын
I’m working on mine right now replacing both sending units, fuel pump and gas filter under the frame… I will need to disconnect the battery and let the air out Thanks for your advice 👍
@cashncoffee
9 ай бұрын
I have the same problem with my 96 Ford F150. My front tank has a large rusty hole in it and the rear one works but very rusty. I plan on replacing both tanks and install new fuel pumps. Those bolts that holds the bed was a job!!! I had trouble getting the ones at front to come free from the large bushings even after spinning them with an impact and lubricating them. Not lifted the bed yet but wish me luck!!!
@BenFierro79
9 ай бұрын
With that much planned work, I'd just cut the bad bed bolts and replace them, good luck
@JimmyHarrison-yz2pt
4 ай бұрын
3/31/24 7:30pm nice Vidio very helpful. Fixing to do both on my truck and planned on removing the bed . Great job and God bless.
@BenFierro79
4 ай бұрын
Thank you
@drivewaygarage1561
Жыл бұрын
Nice video. I think if a guy had a parking structure or a tree, you could pick up the bed with some come alongs or straps. Then a guy could probably do it by himself.
@Vic9mm
9 ай бұрын
Great video only thing I'd do different is solder the wires instead...I don't wanna take a chance of a bad crimp and have to remove the bed again.😅👍
@arturorangel1710
9 ай бұрын
That boy,he's a pro!!
@chrislangston929
Жыл бұрын
Great video! Thanks for walking though step by step.
@hotrodgavin6543
2 жыл бұрын
i tried my hardest to remove the lines with the plastic tools but they just didn't work the one-pice Metal tool that's like $30 at Napa works the best i have a 1992 F250 and its the same setup but different connecters on fuel pump mine has female connecter right on the top of pump they are not made anymore auto parts stores have given me a hard time trying to get the right pump right after i replaced the rear pump i noticed my gas was going out very quick it was going into the front tank from the return line i used the old fuel filter and put a piece of hose on the other end and put a screw in it because there is no line block offs that i can find for it front tank pump assembly is $250 and same for rear it's very expensive
@salvadorsalustiano5911
4 ай бұрын
Great presentation!
@BenFierro79
4 ай бұрын
Thank you
@biglazybilly
Жыл бұрын
that truck is worth some money! dont beat it too crap please!
@BenFierro79
Жыл бұрын
Never, we take very good care of our vehicles , no worries 👍
@thomasament4639
Жыл бұрын
I changed Both fuel punps but whth the rear tank Selected All the retun fuel imstead of going ban to the Rear rank ends Up filling the front tanks Am at a loss. Luckily I have the bed off. Since Both pumps Are new I can’t imagin I have a bad pump. Ideas😊
@chuiisenseii5885
Жыл бұрын
Great video i need to get that done on my 94
@oscarpuente2029
Жыл бұрын
outstanding!
@user-jm3bd1nt6r
22 күн бұрын
What size are the bed bolts??
@paulsopak984
29 күн бұрын
Do the front and rear in-tank pumps, push fuel to the dual tank selector valve on the frame rail ?? There is another fuel pump just fwd of that....to push gas to the engine ??
@wordsboldpublishing
7 ай бұрын
Great job
@BenFierro79
7 ай бұрын
Thank you
@fernandoescobedo5750
Жыл бұрын
Nice job !
@BenFierro79
Жыл бұрын
Thank you
@tylerrigdon6795
Жыл бұрын
Man that’s an awesome job guys
@user-rz6kj3cm8l
Жыл бұрын
Nice job guys!
@BenFierro79
Жыл бұрын
Thank you
@randalynfierro5430
2 жыл бұрын
Good job James
@343Talent
Жыл бұрын
Great video
@BenFierro79
Жыл бұрын
Thank you
@brucecubie6656
Жыл бұрын
Noticed your exhaust, looks good I'd like to copy it on my 96XLT, can you explain it?
@BenFierro79
Жыл бұрын
I got an aftermarket Y pipe, bought 3" single pipe exhaust with Jones Turbine muffler, did axle dump with a 3" inlet 5" outlet tip
@randomguy459
Жыл бұрын
Love the video, very helpful. Im having an issue with my 95. The front fuel pump is returning fuel to the rear tank. When i switch to the rear tank, it runs for a bit, then the truck sputters for a bit then will die if you dont switch tanks. I was told by a mechanic that the check valve in the front pump went bad. Just wondering if the pumps you got had the check valves?
@BenFierro79
Жыл бұрын
I was told the check value was built in when I bought the new pumps
@Teleman01
2 ай бұрын
So I have a dual tank 1993 F150 5.0. Front tank runs perfectly. The rear tank I replaced along with the fuel pump a couple days ago. I'm finding that I could not start the car with that fuel pump. I finally had to hook a clear hose to the output of the fuel pump and run 12 V directly to it to see what was going on. Basically on this new fuel pump, when I do that, I just see fuel puttering out in tiny quantities. Should I see a solid column of fuel coming out of that fuel pump with it running with 12 v directly connected to it? It's obviously running, but for some reason only a little bit of fuel comes out. I'm either thinking the fuel sock is blocked somehow or it's a brand new fuel pump. Any ideas? Thank you!
@BenFierro79
2 ай бұрын
I would check the sock or you may have gotten a bad pump, I have had it happen before, broken right out of the box.
@jamesweaver4021
2 жыл бұрын
Great video, thanks
@randylee2549
7 ай бұрын
so I guess Delphi's strong recommendation to drop tanks and clean the tanks and flush with S&W then dry, doesn't matter when doing a fuel pump repair, OK!
@BenFierro79
7 ай бұрын
That's a good recommendation, thanks for the info
@danemartin5674
Жыл бұрын
Thanks.
@BenFierro79
Жыл бұрын
You're welcome
@keithmuhle
11 ай бұрын
Great job.
@BenFierro79
11 ай бұрын
Thank you
@ippolitius
Жыл бұрын
Great video.
@BenFierro79
Жыл бұрын
Thank you
@trilliejames6872
Жыл бұрын
what size extension did you use?
@kennethsmith1744
2 жыл бұрын
Good job
@BenFierro79
Жыл бұрын
Thanks
@UCcYiOpTJtZPmtbRaE-JWt0w
2 жыл бұрын
Isn't there supposed to be a check valve on the pump for the front tank?
@BenFierro79
2 жыл бұрын
The fuel pumps have check valves made into them. there used to be a check valve kit that was added to the fuel lines where they hooked on the tank, but these are now obsolete.
@trashman1694
Жыл бұрын
They're not "obsolete" the old fuel pumps had check valves as well the problem was they kept failing prematurely because ford removed the fuel tank selector valve on the later ninth gen trucks, and would pressurize both supply lines causing fuel pressure constantly on the opposite tanks check valve. They'll probably fail on these new pumps same way.
@davidcarter8268
Жыл бұрын
Great job , question why did you not replace the whole unit on the front tank Thank You
@BenFierro79
Жыл бұрын
Our parts store did not have 2 and it gave us the opportunity to show both ways
@willspeak6661
5 ай бұрын
Did you get the same pump for the front and rear tanks
@BenFierro79
5 ай бұрын
No I was not able to due to what parts store had on hand and I needed sooner than later
@tidefan4987
Жыл бұрын
Can you please tell me how or where to purchase the correct pump assembly for both tanks that have the required check valve to keep the fuel from transferring tank to tank? The 94 and up do not have the tank selector valve so the check valves are built in to the pumps. I replaced both of mine but the fuel transfers from front to rear tank. All the pumps I can find show 92 to 97 and none appear to have check valves. Thank you for any info.
@BenFierro79
Жыл бұрын
I bought both of mine at O'Reilly, did not give me options about check valve but I lucked out and worked, everything I have read recently does state that the check valve is built in, sorry can not be more help
@tidefan4987
Жыл бұрын
@@BenFierro79 thanks for the reply Ben. I have found a way to tell if the valve is there. You can blow into the return line with your mouth. If the air goes through the valve is not there. If the air is restricted it has the valve. Thanks again
@neilious1
Жыл бұрын
@@BenFierro79 curious if you found an awnser to this. In the same spot
@bryancollins3622
2 жыл бұрын
What size socket for the bed bolts?
@BenFierro79
2 жыл бұрын
18mm
@JustWithJosh
Жыл бұрын
What is the name of that shim kit you used to remove the hoses?
@BenFierro79
Жыл бұрын
I got them at O'Reilly right off the shelf, can't remember brand though, sorry
@JoseLopez-tb5mk
Жыл бұрын
So my "pointer" on the fuel gauge on dash is way past the "full" mark when i switch to using the front tank What would cause this ,"specificslly" ty.
@BenFierro79
Жыл бұрын
Possible bad sending unit, or float on pump is stuck upright
@JoseLopez-tb5mk
Жыл бұрын
Not a bad ground??
@BenFierro79
Жыл бұрын
Yeah it could be a bad ground
@TheAdam61904
Жыл бұрын
What about the check valves?
@BenFierro79
Жыл бұрын
Mine the check valves are built in to the pump assembly
@chuiisenseii5885
Жыл бұрын
Do you guys have a shop here in az?
@BenFierro79
Жыл бұрын
We are just father and son working on stuff at the my house
@chuiisenseii5885
Жыл бұрын
Nice nice . Do you know of any good shops here in az. My truck is running alil rough cant figure out whats the problem i really think its the fuel pump though
@BenFierro79
Жыл бұрын
Sorry I don't, that's another reason I do most of my own work
@PeterHatch-mx7zc
Жыл бұрын
How many gallons is the back tank thks
@BenFierro79
Жыл бұрын
rear tank is 18 gallons
@josuecitoflores5224
2 жыл бұрын
Are both fuel pumps the same for the rear and front tank?
@BenFierro79
2 жыл бұрын
Front and rear are different
@tenochzepeda5287
2 жыл бұрын
@@BenFierro79 I’m looking online for the front and rear pumps, how do I tell the difference so I don’t purchase 2 of the same ?
@Xmd16163
2 жыл бұрын
It would of been good if they provided us with part numbers and brand
@franklopez4603
2 жыл бұрын
What tool model / size did you buy to remove the fuel lines. I rented a set and they don't fit. Thank you.
@BenFierro79
2 жыл бұрын
I got a plastic set from harbor freight
@TxParkerd
Жыл бұрын
What did you use to clean out the old gas from the rear tank ?
@BenFierro79
Жыл бұрын
A gallon of diesel
@hoodgamingswizzycole6969
2 жыл бұрын
What size are the bolts under the bed
@BenFierro79
2 жыл бұрын
18mm
@dustinkamery6530
Жыл бұрын
What size is the front tank and pump Where did you buy fuel pumps
@BenFierro79
Жыл бұрын
These are these part #s for my truck, My front tank is 19 gallon, I bought both from Oreillys Front pump only is - MasterPro Fuel Pump Part #: MPA23000 Line: MPF Rear complete assembly is - Precision Fuel Pump Hanger Assembly Part #: A46087 Line: PFP
@dustinkamery6530
Жыл бұрын
Thank you, I got 16 gallon front tank figured i needed a 16 gallon pump but won't pull fuel to motor
@martlymar1
2 жыл бұрын
Does the fuel gage automatically set itself?
@BenFierro79
2 жыл бұрын
I did not have to do anything for the fuel gauge, its working and accurate so far
Пікірлер: 111