Hope this was cool guys! Just please remember if you decide to try this to always use extreme caution, these PTC elements are like little stoves and can cause VERY severe burns or cause fires. And obviously don’t keep any flammable materials around/under where you’re using it.
@NaN-0x-n1m
3 күн бұрын
Try car cig lighter as infrared reflow thing
@LyLeap
3 ай бұрын
We all know , he lost the diode in the end xD
@Traper_T
3 ай бұрын
[*] for 1N4148
@KeonsLab
3 ай бұрын
Hahaha yeah…. It just flew out of my tweezers and I heard it land in front of me but couldn’t find it :(
@dadassery8506
3 ай бұрын
@@KeonsLaboh, the amount times i’ve lost tiny things..
@BDYT1422
3 ай бұрын
@@KeonsLabthe pain from losing something super small that flew. And even though it sounded close, you can’t find it.
@Marmelade3
3 ай бұрын
yeeted into the ninth dimension
@Ferzon_YT123
3 ай бұрын
OMG!!!! Thank you soo much for this video!!! This quite literally saved me 40 bucks from buying an air solder. What a life saver
@KeonsLab
3 ай бұрын
Glad it helped! :) Just make sure to stay safe!
@IceofDream.
2 ай бұрын
That thing is cool but can't replace the hotair
@_EasyOnEasy_
3 ай бұрын
Why did you use a heat sync for low surface area?
@KeonsLab
3 ай бұрын
It’s all I had on hand, I tried ceramic fiber insulation sheets but the element got so hot it started leaving a brown ‘charring’ on it.
@samueljoseph6370
3 ай бұрын
I need one of these - I've thrown away boards before because I messed up an IC and couldn't get it off
@KeonsLab
3 ай бұрын
Oh I know that feeling, my old GPU’s (RX480) fuse burnt so I got replacements but couldn’t desolder it. I ended up having to get a new GPU even though I don’t even use it much lol. It just sort of feels like a PC isn’t complete without a GPU. The only time I’ve actually found my GPU super handy was when rendering my CAD models with raytracing in Autodesk inventor. Something that took my CPU 40 minutes took my GPU seconds and it’s not even a fancy one
@avri210984
3 ай бұрын
Very cool 😎 Where can we purchase the heating element?
@KeonsLab
3 ай бұрын
They’re usually just called PTC heating elements that can be found on sites like ebay Amazon or Aliexpress. They come in different voltages and temperatures though. Also please be very careful if you do decide to get one because it’s basically a tiny stove so there’s a fire hazard as well.
@Traper_T
3 ай бұрын
Now should I regreet buing sugon 8620dx?
@KeonsLab
3 ай бұрын
Oh absolutely not! That’s an actual proper device for this kind of stuff, the hack I’m showing here is mostly useful for assembling one-off small pcbs or fixing small parts.
@satrah101
3 ай бұрын
So just use mums iron and ssve 2 dollars
@KeonsLab
3 ай бұрын
You know, I’ve never thought of that, I guess it might work, but I’m not sure getting flux all over a mom’s iron would be a good idea 😂
@deathrider310
3 ай бұрын
Know how to make that there heating pad
@KeonsLab
3 ай бұрын
Not quite sure what you mean but ok! 👍 ‼️IMPORTANT EDIT: PLEASE READ MY REPLY TO YOUR FOLLOWING COMMENT!!!
@deathrider310
3 ай бұрын
@KeonsLab I was asking if there's a way to make a heating pad yourself. Like a DIY type of thing... I know they're inexpensive but I like making my own tools if I can
@KeonsLab
3 ай бұрын
Ooh like those personal heating pads? I DEFINITELY WOULD NOT RECOMMEND IT!! While they ARE simple devices, the ones you get at the store are required to meet certain safety standards, and the companies making them are incentivized not to put out a dangerous product to avoid being massively sued, resulting in a pretty safe product with proven safety features that are usually hidden from sight. But if you try to make your own, there’s just SO MANY things that could go wrong that’s it’s not even worth it, and worst of all, if you hypothetically DID end up making one and severely hurting yourself or burning down a building, you wouldn’t be able to take any legal action against a manufacturer because you *were* the manufacturer (legally). I HIGHLY, HIGHLY URGE YOU NOT TO TRY THIS I love making my own tools and devices as well just like you, it’s super fun to make something yourself instead of buying it, but for some things it’s not advisable, for example things like space heaters, circuit breakers, heating pads, etc.
@deathrider310
3 ай бұрын
@@KeonsLab you've got to be the best youtuber
@deathrider310
3 ай бұрын
@@KeonsLab and thank you for the tip
@Python-yq3gm
3 ай бұрын
Nice job burning all your components
@KeonsLab
3 ай бұрын
Not sure if it burned them or not but the board worked afterwards… could’ve damaged them maybe? I tried to see if I could find a maximum temperature for the components and a few sources said that ~290°C should be fine for them 🤔 Not sure but I’ll keep looking
Пікірлер: 32