Thanks for this. My husband and I are aircraft mechanics, not car mechanics, but figured from looking at it it shouldn't be too hard. Really appreciated you giving what size everything was. Got it changed in less than an hour
@TheOriginalBeeCee
Жыл бұрын
Awesome glad you got it done thanks for the comment!
@dnice583
8 ай бұрын
Same situation.
@fefefilmprod8688
Жыл бұрын
Just changed my own alternator for the first time. This video was a tremendous amount of help. Thanks for making it. I appreciate it.
@TheOriginalBeeCee
Жыл бұрын
I appreciate the comment, glad it helped 👍
@DouglasPaige-w6o
6 ай бұрын
My Goodness I just found the BEST Mechanic on KZitem! You did not miss a thing! And you explained everything in perfect order. No stumbling over your words or next steps. And you kept it PG with no foul language. LOL on the battery terminal crap! Your a Natural teacher! Just had to subscribe so I can watch more of your videos. Now on to replacing an alternator for my sister. Thank You and wished we worked together.
@TheOriginalBeeCee
6 ай бұрын
Thank you! I truly appreciate your comment!! 🙏🙏 good luck on the job, hope all goes smoothly!
@joroboyvn
Жыл бұрын
Just replaced a 4 year battery thinking it was dying on me, the new one had a great start, then after a few days was behaving as the old one, hard time starting the car. On further inspection my alternator was intermittently charging going over 14V, then dropping to 12.6V (not charging, pulling from the battery). Time to replace the alternator. Thanks for the video!
@TheOriginalBeeCee
Жыл бұрын
Awesome job on figuring it out. Voltage tells all! Thanks for the comment!
@kylieknight3334
2 жыл бұрын
For anyone having trouble installing the new one and getting bolt holes lined up, I cleaned the mounting ears with a wire brush and lubed them with wd40 and I could adjust it so much easier to get that lower 14mm in. Took me way longer than it should have lol.
@TheOriginalBeeCee
2 жыл бұрын
Lol 👍👍
@vteciguess
Жыл бұрын
You the real MVP, thanks man
@DarkSygil666
Жыл бұрын
That helped, thank you
@savannamm
Жыл бұрын
Bless you for this comment. Went on so easy we thought for sure it wasn't where it was supposed to be with how difficult it was to remove
@Magelia
7 ай бұрын
Thanks for this I’ll try tomorrow cause this whole thing is such a bitch to do. I have the alt in there but the bottom bolt is taking so much effort I’m afraid the thing is cross threading or something. Hope to god it isn’t. 😢
@LifeIsGood-qg3xv
11 ай бұрын
One of the greatest videos I've seen on KZitem
@TheOriginalBeeCee
11 ай бұрын
Thank you! I appreciate your comment 🙏🙏
@markrobinson2086
Жыл бұрын
First time changing an alternator and this video was emormously helpful. Many thanks.
@TheOriginalBeeCee
Жыл бұрын
Awesome glad it helped! Thanks for the comment 🙏
@DarkSygil666
Жыл бұрын
Thank you so much! This video helped me a ton tonight! It didn't take me too long to do it for the first time, either. That 14mm fought me for a while, but it finally gave way. I'm sincerely grateful for the thorough step by step instructions.
@TheOriginalBeeCee
Жыл бұрын
Awesome! Glad it helped! Thanks for the comment!
@guyfromflorida6228
7 ай бұрын
Just changed my own alternator with no real mechanical experience besides doing oil changes & changing tires. Just wanted to say thanks, you saved me a few hundred dollars in labor 🙏
@TheOriginalBeeCee
7 ай бұрын
Awesome! Glad to hear 🙏
@jamesdevore4443
Жыл бұрын
Thanks I knew there had to be some removable items in order to clear a path you did marvelously.
@jamesdevore4443
Жыл бұрын
You seem to be very knowledgeable and you produce well your voice is pleasant and clear you just a winner that's all keep moving forward
@TheOriginalBeeCee
Жыл бұрын
I appreciate it!
@kandaman304
Жыл бұрын
Great video! Extremely clear and precise. I'm having the exact same issue right now with my car and contemplating fixing myself or towing it to the shop.
@TheOriginalBeeCee
Жыл бұрын
Thank you I appreciate the comment 🙏
@joegroft5944
2 жыл бұрын
First time changing an alternator for me. It took about an hour and 45 minutes. Thank you so much for your video.
@TheOriginalBeeCee
2 жыл бұрын
I appreciate the comment! Glad it helped 🙏
@KLK01
8 ай бұрын
Thank you for this homie. I did this with my brother and it was awesome when finally got it working.
@TheOriginalBeeCee
8 ай бұрын
Awesome man glad to hear!
@justinpulu3984
5 ай бұрын
Thank you man!!! First time replacing one and couldn’t have done it without the vid!
@TheOriginalBeeCee
5 ай бұрын
Awesome to hear, I appreciate the comment!
@BeKlickin
Жыл бұрын
Really a well made video. Detailed with all the sizes and tool combos involved
@TheOriginalBeeCee
Жыл бұрын
Thank you! I appreciate it 🙏
@XCHANGEDAVE
2 жыл бұрын
Great video I've watched it at least three times.
@TheOriginalBeeCee
2 жыл бұрын
I definitely appreciate it! Thank you 🙏
@BillyJackCaldwell
2 ай бұрын
I'm curious, what all tools are needed? And about how long should it take, to remove the old alternator? And how long should it take, to install the new one? If you actually read this comment and you wouldn't mind replying, I would sincerely appreciate it. And thank you very much, for sharing this video. It seems to be very helpful. Keep up the great work.
@TheOriginalBeeCee
2 ай бұрын
Appreciate the comment. All the tools needed are outlined in the video in text bubbles when utilized. Everything needed/used was mentioned. Also…There are multiple tools you could technically use in multiple instances as well…but all tools I personally utilized are mentioned. As far as time, its kind of a subjective question. Depends on your experience, patience, tools, etc. when it comes to time what i say/suggest is do it at a pace you feel comfortable with where you are not rushing. Give yourself enough time that you can get it done without feeling like you have a time limit.
@pablodiaz-dz8jl
Ай бұрын
Well done brother , you know how to teach very well 👍
@TheOriginalBeeCee
Ай бұрын
Appreciate the comment!! 🙏🙏
@malikcunningham6771
5 ай бұрын
Hey could you possible reply back with the list of tools you used? Amazing video btw you explaining everything very very clearly.
@TheOriginalBeeCee
5 ай бұрын
Appreciate it! But every tool used was both mentioned verbally in the video, as well as outlined in text bubbles when mentioned. There was nothing used that wasn’t mentioned in the video!
@amandaclark73
3 ай бұрын
Diag/signs of bad alternator: Battery light comes on. Check volts on the battery and on the alternator with a voltmeter. Good battery should be 12.5 V car off and cold, 13.7-14.7 V while running, alternator should match battery V. If V are good from alternator but not the battery it is probably a bad battery. Car won’t start. Check volts on battery and on alternator with a voltmeter Check serpentine belt to make sure it is connected Check computer for codes Procedure to replace alternator -Remove battery connections (negative first, then positive, make sure the connections are clear) -Remove coolant reservoir to make space -move power steering fluid reservoir but do not remove -loosen the tensioner pulley to pull the serpentine/drive belt off the alternator - remove wiring harness (push tab in and pull to unplug) -remove 2-3 bolts (depends on year) that are keeping alternator in position (you can use a magnet to catch bolts, or hand loosen -Now the alternator will move, remove bolt from from the positive cable wire -Install new alternator in reverse order and replace items that you removed. Ensure serpentine belt is on correctly -Test new alternator and battery voltages
@mtraven23
3 ай бұрын
if anyone else is uncomfortable about the "feel it" torque spec: the upper, 8mm bolt (12mm head): 16ft lbs (22Nm) lower, 10mm bolt (14mm head): 33 ft lbs (45Nm) everything else he did was solid.
@elangokaliamoorthy7465
10 ай бұрын
It's a tremendous video, Thank You.
@TheOriginalBeeCee
10 ай бұрын
Thank you! Appreciate the comment!
@TruEnuffdTb
Жыл бұрын
Hey man thanks a lot you have helped me make $225 I worked on a friend car
@TheOriginalBeeCee
Жыл бұрын
Awesome man glad it helped 🙏
@Jmayer1911
Жыл бұрын
Great video . I think i can tackle this job after ur informative video. Thanks u saved me alot of money bro
@TheOriginalBeeCee
Жыл бұрын
Awesome bro appreciate the comment 🙏
@LandonTroyer
11 ай бұрын
2011 accord owner here, man these 08’s had so much more space. Managed to get it off the mount but then realized that no matter where I try and pull it I can’t pull it out. As someone who’s never done this before, should I take out those front fans to make space then reinstall them?
@agracer1000
2 жыл бұрын
Take a small Phillips head screwdriver and stick it thru the bottom hole to work the alternator back and forth to get it lined up. Use the screwdriver like a dowel to get it aligned. Also, when you put the bolt in, screw counterclockwise first (wrong way) until you feeel it “click” then you know the threads are aligned.
@sbickmore15
Жыл бұрын
I imagine there was some colorful language on that bottom bolt pause. It's pouring outside and I get to do one today.
@alexismichos2642
17 күн бұрын
Can you list the tools I’ll need to do this job I really don’t feel like taking it somewhere and spending a lot of money to have someone do it but I just don’t think I have the right tools
@calilivin5167
Жыл бұрын
I’m using a 1/2 ratchet extended with a 1/2 14mm basically the same technique and there is no room at all to even set the ratchet on the bolt idk how u made it look so easy to have it fit in there
@TheOriginalBeeCee
Жыл бұрын
Because I used a 3/8 drive ratchet & socket, not a 1/2 lol. 1/2 is too big, at least the 1/2 tools I have are…and sounds like yours are as well.
@calilivin5167
Жыл бұрын
@@TheOriginalBeeCee yep that fixed the problem got the bolt out first thing this morning thanks 🙏🏽
@TheOriginalBeeCee
Жыл бұрын
@@calilivin5167 nicee glad you got it done
@Lulu31712
5 ай бұрын
Thank you for your Sir!!, extremely helpful and very well explained!👏👍
@TheOriginalBeeCee
5 ай бұрын
Thank you for the comment! 🙏🙏🙏
@dankucker5973
Ай бұрын
Very helpful thank you. You do good videos.
@TheOriginalBeeCee
Ай бұрын
I appreciate the comment! Thank you!
@gesleyfenelus
Жыл бұрын
the first video i actually was able to follow properly
@TheOriginalBeeCee
Жыл бұрын
🙏🙏🙏🙏🙏
@gesleyfenelus
Жыл бұрын
@@TheOriginalBeeCee I took the alternator out just waiting for the other one
@TheOriginalBeeCee
Жыл бұрын
@@gesleyfenelus nice…good luck with install!
@SJB956
2 жыл бұрын
Thanks for the video! My electrical clip is hard to remove, any suggestions?
@TheOriginalBeeCee
2 жыл бұрын
I would say try to remove it once you have the alternator unmounted. So once alternator is off the bracket and you can freely move it, i would try to pop it off then because you have better access to it. You can also try to use a small plastic pry tool on the clip, or a metal pick or small flat-head, but you really wanna tread lightly when using a metal tool on the plastic clip.
@SJB956
2 жыл бұрын
@@TheOriginalBeeCee How long did it take you to fiddle with the alt until it came out? I’m at that step right now, everything else prior was easy thanks to you.
@TheOriginalBeeCee
2 жыл бұрын
@@SJB956 maybe 2 mins tops? I recorded pretty much the entire removal process starting @ 9:39. Just make sure that A/C line is out of your way and not blocking you…and you should be able to work it out!
@lilpoppy360
2 жыл бұрын
Maybe turn ur back towards the car and use your right hand. Your thumb will align with the clips button
@michaelchristmann4980
Жыл бұрын
Thanks buddy just put one in myself in a 2011 coupe. Tough stuff with the provided space but doable with some patience
@michaelchristmann4980
Жыл бұрын
I did crack my power steering tube though 😂 guess I’ll be replacing that shortly
@TheOriginalBeeCee
Жыл бұрын
@@michaelchristmann4980 awesome man glad you got it done! But lol yea man the PS is in a bad spot im sure that’s probably what happened to the car in the video as well!
@benjaminszubajr7071
3 ай бұрын
I bought the same brand you did but the alternator won’t budge into place
@TheOriginalBeeCee
3 ай бұрын
Something has to give my man. It does need some persuasion to find its way home
@fabiolamerritt9789
2 ай бұрын
What’s the name of that volt device? My daughter’s Honda accord 2013 has problems. It doesn’t start up and after they charge the battery it would do it
@TheOriginalBeeCee
2 ай бұрын
volt-meter/mutlimeter
@alexismichos2642
17 күн бұрын
I had just bought a battery and it was running on the battery alone for like two days and now is completely dead once I replace the alternator is that battery still good since I just bought it or do I need to get a new battery as well
@TheOriginalBeeCee
16 күн бұрын
The battery could probably be charged back up. Since it’s new, there’s a good chance it probably can be brought back to life. Just needs to sit on a charger for a while then be tested after to ensure its good. As for your other comment in regard to tools…everything used was mentioned & outlined in text bubbles throughout the video. Nothing was used that wasn’t mentioned in the video.
@byronchavaloc9351
Жыл бұрын
Thank you for your time,it helped me alot.
@TheOriginalBeeCee
Жыл бұрын
Thank you I appreciate the comment!
@The0fficial.i
Жыл бұрын
This is what I needed to know . Could you have used a breaker bar on that bottom alternator bolt ?
@aftlxunknownx731
Жыл бұрын
That’s what I did to break the bolt loose and then went back to my regular socket wrench
@aftlxunknownx731
Жыл бұрын
I’m having a lot of trouble actually getting the old alternator out it feels stuck and I’ve tried wedging the breaker bar behind it like you did with the pry bar but no matter how hard I pull wiggly or anything it will not budge. Yes I did take all two bolts and one nut out. If anyone could give me some ideas or if using a pry bar is the only way just lmk
@donmynack
Жыл бұрын
Looks like this thing is spewing power steering fluid too, which is common with these. Mine leaked out of the pump and a ran down on the alternator for so long it hosed it (this had been going on long before I bought the vehicle). Edit: Missed that the reservoir is totally broken...how do they even have power steering?
@TheOriginalBeeCee
Жыл бұрын
I don’t think they did have power steering lol
@andrewpate9157
Жыл бұрын
Don’t know what happened to the reservoir!!! It was not broken at first of the video. Did you charge them for that?
@TheOriginalBeeCee
Жыл бұрын
Oh it was broken. It was only initially cracked…as you can kinda see @ 2:45, & you can obviously tell it had been leaking. I actually completely separated it, but it was already broken/cracked nonetheless. In between clip ending @ 3:02 & clip starting & 3:03 i literally put my index finger on that cracked outlet just to see how bad it was before I was gonna pull the res out, and the outlet completely separated @ the crack. The customer told me he had PS pump replaced not to long before this alternator issue, and said it was still loosing PS fluid pretty quickly. I told him i would check it out while i was in there doing the alternator and I noticed the reservoir. So it might have been cracked during that pump replacement, or age could have just simply taken its toll on the plastic.
@WildNwhEELING
6 ай бұрын
So if I slide out the power steering reservoir do I need to disconnect the lines to it or will I have enough room to slide it out the way , I more less am going to change mine in a parking lot and wondering if I should bring extra ps fluid or coolant lol
@TheOriginalBeeCee
6 ай бұрын
Should be able to slide it out with no issues without disconnecting anything. Just be careful with it and working around it thats all.
@crowbaril903
Жыл бұрын
What about the weird load monitor on the bus bar in the fuses under the hood? I heard that can be why alt not working
@TheOriginalBeeCee
Жыл бұрын
Well with vehicles really anything is possible lol…so that could always be a possibility. I would probably say most of the time its going to be a bad alternator. But thats why you need to utilize a volt meter, and thats why i utilized one in the video and reviewed what to look for! Volt meters tell you almost everything.
@cichlidfrontosaguy9141
Жыл бұрын
Worked great thanks!
@TheOriginalBeeCee
Жыл бұрын
Appreciate the comment 🙏
@jeffsmith9389
10 ай бұрын
In your opinion does it matter if you buy it remanufacured or brand new? I noticed you installed a remanufactured and don't want to waste money if you think it is just as good.
@TheOriginalBeeCee
10 ай бұрын
OEM is more than likely always going to be better quality than remans. But I don’t mind remands and use them 99% of the time because if you ever were to have an issue with it…they have lifetime warranty & somewhere like autozone or advanced will swap them no issues.
@jamesdevore4443
Жыл бұрын
Obviously I will have no choice but to subscribe thank God you're not a talker lazarbeam focus that's the way to produce a video some of these channels are ridiculous I really don't care why you had to move last week please let's get the transmission out of the truck
@TheOriginalBeeCee
Жыл бұрын
Haha i hear ya! I appreciate your comments!
@iai2306
2 жыл бұрын
How do you tell the difference between a clutch pulley and no clutch?
@dereksanchez1289
2 жыл бұрын
How long from start to finish does it take to put it on..thanks...
@TheOriginalBeeCee
2 жыл бұрын
Probably about an hour roughly.
@joegroft5944
2 жыл бұрын
Took me about 1:45.
@alro7582
2 жыл бұрын
Hey when I pulled the harness off there is a thin red and white wire hanging what could it be it's not the two main ones to connect it's part of the harness
@TheOriginalBeeCee
2 жыл бұрын
Unfortunately I can’t say I know off of the top of my head what it is, as I only did the job on the vehicle….its not mine and I don’t have it readily available to go check for reference. But just from briefly looking I don’t believe there is red/white wire in the 4-pin navy blue alternator harness?
@joshuasepulveda3145
2 жыл бұрын
For some reason the 14mm bolt by the alternator belt is really hard to even loosen my belt. When i pull down it release some tension but the bolt never moves. I have to use a great amount of strength to keep it down . Can you help on to loosen the belt. You made it seem so easy . Btw i used wd40 in case it was rusty. Help
@TheOriginalBeeCee
2 жыл бұрын
Are you using a breaker bar, or a long enough breaker bar..like the one I utilized in the video?
@joshuasepulveda3145
2 жыл бұрын
I just got it to release and realize my bar probably doesnt have the strength. Im limited with tools ar the moment but thanks
@TheOriginalBeeCee
2 жыл бұрын
@@joshuasepulveda3145 got ya! But yea man, bar leverage can make or break you when dealing with releasing belt tension on most vehicles.
@joshuasepulveda3145
2 жыл бұрын
After lots of hard work was finally able to get it done. Thanks again great vid.🙏🏾
@TheOriginalBeeCee
2 жыл бұрын
@@joshuasepulveda3145 nice glad you got it done!
@SilentMusicNote
11 ай бұрын
Im on my 2nd day and for the love of gos i canr get the belt back on and you did it super damn ez :(
@TheOriginalBeeCee
11 ай бұрын
Lol ive done my fair share of belts so that helped. But are you using a long enough breaker bar? That could be your issue if not. Make sure you are outside of the a/c line when pulling the breaker bar. Worst case scenario you could have someone pull the tensioner with the breaker bar…while you route the belt so you don’t have to focus on both.
@marshalmitherz3352
Ай бұрын
Take it from me. Be careful tightening the power cable back on. I've turned the whole post off w the nut and everything breaking off. Anything copper will bend like butter if you're a stronger guy.
@TheOriginalBeeCee
Ай бұрын
Turning wrenching into a powerlifting meet 🤣
@mohammedmegag687
7 ай бұрын
Thank you that was helpful 👍🏾
@TheOriginalBeeCee
7 ай бұрын
Thanks for the comment man!!!
@mysteryy234
Жыл бұрын
Did you change out the alternator pulley or was the old pulley the same size as the new one? Just put a new alternator on but the belt is not long enough to go back on and everything is still routed right
@TheOriginalBeeCee
Жыл бұрын
Same size. Can’t say I’ve ever heard of that issue. Might wanna take the alternator back off and sit them on top each other…pulley to pulley…to verify they’re the same. If they are the same, then something is definitely not right and i would go back over everything and double check.
@mysteryy234
Жыл бұрын
@@TheOriginalBeeCee yeah pulleys are the same size and the belt is seated in all it's grooves. Idk why it's not long enough now
@derekbenn4620
9 ай бұрын
This video was awesome. Thank you so much. God bless you.
@TheOriginalBeeCee
9 ай бұрын
🙏🙏 appreciate the comment!!
@charlesduffy4363
8 ай бұрын
What's the mileage?
@TheOriginalBeeCee
8 ай бұрын
Been a while i forget, but I wanna say 180k’ish.
@kurttanner6362
2 жыл бұрын
life saver mate, cheers
@TheOriginalBeeCee
2 жыл бұрын
Appreciate it! 🙏
@Svdhxbdau
Жыл бұрын
What if it dies after driving won't crank shows lights on in car but doesn't carnk and it doesn't jump start
@TheOriginalBeeCee
Жыл бұрын
Need to do some voltmeter testing and see where you’re at, and see if power is your issue. I reviewed what voltages should be what in the video, so you can use that for reference
@Jzzonem
Жыл бұрын
So was the power steering pump shot?
@TheOriginalBeeCee
Жыл бұрын
Actually it wasn’t.
@Jzzonem
Жыл бұрын
@@TheOriginalBeeCee wow must not have happened long before this. Thank you for the video, helped me out a lot!
@TheOriginalBeeCee
Жыл бұрын
@@Jzzonem awesome, glad it helped! But as far as the PS I think something happened when it was towed because the person told me the tow-guy had the hood open and was looking around as if they were trying to figure out what was wrong and all that. So who knows lol
@Jzzonem
Жыл бұрын
@@TheOriginalBeeCee that makes sense actually. Lol
@Zbest36
Жыл бұрын
Know any reason why an alternator would start smoking?
@TheOriginalBeeCee
Жыл бұрын
Either electrically failed really bad, or its overheating/over-charging. could even be the bearing going bad, but you would probably be getting a bad belt squeal if the pulley bearing was bad. I would get it replaced immediately and not let it happen again though because it could potentially damage the rest of the charging system.
@danjones3402
2 жыл бұрын
How many miles when replaced?
@TheOriginalBeeCee
2 жыл бұрын
Not 100 percent, as its not my vehicle. Although I believe is was 165K-ish IIRC.
@Bailes1983
2 жыл бұрын
Mine just went out and I’m at 150k. The D started to blink on my dash to let me know it has enough. 2009 Accord
@TheOriginalBeeCee
2 жыл бұрын
@@Bailes1983 got ya! That is probably about an average lifespan of an alternator realistically.
@sammiedopee
Жыл бұрын
Thank you!
@TheOriginalBeeCee
Жыл бұрын
🙏🙏🙏
@jamesdevore4443
Жыл бұрын
That battery is not coming back
@adrien8695
Жыл бұрын
Goddamn alternator broke I see y’all’s too. How’d it happens homie leave a comment
@kazayuki-4416
2 жыл бұрын
How much does an alternater cost for Honda accords lxp?
@TheOriginalBeeCee
2 жыл бұрын
Prices vary, they’re all over the place. Depends on where you get it..if it’s aftermarket or OEM, etc., etc. Check out Advance Auto Parts, NAPA, Rockauto, etc.
@testchannel9164
2 жыл бұрын
Hi, I am interested in buying a used car in Delaware. If you are interested, we can catchup at Hak's sports bar and discuss good places to buy a used car. It seems like you are interested in this field.
@TheOriginalBeeCee
2 жыл бұрын
If you want my honest opinion, there really isn’t a good place to buy a used car….especially these days. More and more cars that are potentially problematic…that would have probably been dumped at auction years ago, are now on dealer lots every where due to inflation, and the overall value vehicles are bringing in these days. That said, there are good used cars available…but you just have to find them. There isn’t one source/dealer that I would suggest and say, “go here..this place as a whole has good used cars.” Now I’m sure there are a couple-few good cars on various dealer lots….but I would say probably more are going to not be, and have had some type of history. The best way to find a good used car is good old fashion research. Start with finding a vehicle you like, that is generally reliable to begin with. I.E. Hondas, Toyotas, etc…NOT a GM with a 3.6, not a Nissan CVT, etc. Then, once you a find a potential vehicle, use CarFax to get a general idea of the vehicles history. You can even use sources like autoauction.io to see if the vehicle has ever been run thru an auction before..with the pictures to match. From there….if the vehicle history/CarFax checks out, and the vehicle looks good….the best thing you can do is get a pre-purchase inspection. This is a huge thing people miss, and how you get stuck with a lemon. Its better to spend $75-$150 on a inspection, than thousands and thousands on a lemon you’re now stuck with. Have it fully evaluated…should be checked for leaks, under-carriage damage, damage in general (potential prior wrecks), suspension play, tire condition, potential codes checked, etc. all before buying to avoid getting stuck with something potentially problematic. And if the dealer isn’t willing to allow you to get an inspection, then you have your answer right there.
@iAmConfusion
2 жыл бұрын
🤙🏽🤙🏽
@TheOriginalBeeCee
2 жыл бұрын
🙏🙏👊👊
@wildhorse1966
6 ай бұрын
junk alternator .. if you can get a denso rebuilt buy one instead of dealing with autozone
@TheOriginalBeeCee
6 ай бұрын
I explained why an Autozone alternator was utilized in the video.
Пікірлер: 155