This guy is very incouraging he makes me want to jumb into it right of the bat. Awesome job dud❤
@horizonview1850
4 жыл бұрын
Who the hell disliked this video . you are a hater guy is 5 star
@alex59606
5 жыл бұрын
u guys are awesome i cant find any video with w204 trans removal
@rommelraj9323
4 жыл бұрын
How did you get to the top bolt? No one is showing how they opened it.
@best_technician
4 жыл бұрын
Just lower the transmission little bit and get it with a long extension.
@anthonymckinley1380
4 жыл бұрын
Moving like a madman..
@DenzellDrew-rx6mo
5 ай бұрын
What about top two bolts
@tomtamshen7277
Жыл бұрын
I'm doing the job now and cannot seem to get the drive shafts to brake free??? Any advice is welcome but I've tapped them with a rubber mallet and they won't budge.
@best_technician
Жыл бұрын
Try to use chisel and Hammer .
@mglsite
4 жыл бұрын
It is so nice to have a lift.
@best_technician
4 жыл бұрын
Yes .
@arthurgevorkyan2788
5 жыл бұрын
Great job Took only 5 minutes
@nickgatt1680
3 жыл бұрын
Good job very well done
@DenzellDrew-rx6mo
6 ай бұрын
Gave me a little bit of hope hopefully I can do it in 5 minutes
@seankellogg6154
5 жыл бұрын
Nice work. Thanks for posting
@lochlandominik9212
3 жыл бұрын
You prolly dont give a shit but if you're bored like me during the covid times you can stream pretty much all the latest movies on instaflixxer. I've been binge watching with my brother for the last couple of months =)
@kodamessiah3582
3 жыл бұрын
@Lochlan Dominik Yea, have been watching on InstaFlixxer for years myself :)
@elliotramon9878
3 жыл бұрын
@Lochlan Dominik Yup, I've been watching on instaflixxer for months myself :)
@zpaliy
Жыл бұрын
How do I turn transmission inside do get all bolts ?
@evotalon
Жыл бұрын
Torque convereter bolts? put a 1/2" ratchet and socket on the front crank pulley and turn engine over by hand. He had someone doing that for him in the video, you can hear him telling that person to stop everytime they turned it over until the bolts lined up.
@whoisryan6680
2 жыл бұрын
Awesome video straight to the point.
@AB-kc9ud
4 жыл бұрын
HELP.... just replaced mine and the GL is not moving... What to do? please help.
@best_technician
4 жыл бұрын
Did you change the transmission Module to
@best_technician
4 жыл бұрын
Y have to program the new transmission
@best_technician
4 жыл бұрын
If you can not do it you have to take it to the dealer . When you take it to them don't Mention that you change the transmission
@samd6601
4 жыл бұрын
Can local shops program the swaped transmission? And where would the new module come from?
@best_technician
4 жыл бұрын
@@samd6601 noooooo . Only dealer , or you have to make sure that the shop can do it for sure.
@anthonymckinley1380
4 жыл бұрын
Wheres the swipe?
@rigovillicana3560
3 жыл бұрын
I swapped my transmission but kept my original module still didnt walk i was told that this way i wouldnt need to program but still didnt walk it moves when it wants but not fully
@best_technician
3 жыл бұрын
There are two modules , one is out side with the range sensor and one is inside the transmission.
@best_technician
3 жыл бұрын
Question , why did you change the transaction?
@michelnadon6243
4 жыл бұрын
where is the oil stick
@best_technician
4 жыл бұрын
There is no oil stich on this car
@jorgegar5055
4 жыл бұрын
no oil stick, these transmissions do not have one, they are filled fom the botom through a level tube inside the tranny
@Apsm403
2 жыл бұрын
Did you have to drop the exhaust and drive shaft completley?
@best_technician
2 жыл бұрын
Nope
@Apsm403
2 жыл бұрын
Thanks, just got it out.. Should i just swap the old module on new transmission?
Пікірлер: 43