The man is a beast, no matter the weather he shows up, he has to be one of the hardest workers I have ever seen. These customers are privileged to have such a pro work on their car.
@WMCS
3 жыл бұрын
Thanks Kevin. It’s all in our name .,, ✨🎄🎄🎉🍻
@BigBoom92
3 жыл бұрын
@@WMCS Happy Christmas to you kevin. I hope next year is good to you and your channel. You deserve it 👏. P.s please use Jack stands just incase the hydraulic lift fails. We don't want to lose the beast.
@alessandrer3616
3 жыл бұрын
The best mechanic in UK ! Thanks for sharing ! Respect man ! Have a good day boss !
@GlossaME
3 жыл бұрын
Este este
@astralo_tec5759
3 жыл бұрын
Crazy dude! Ohne Bühne, ohne Zentrierdorn. Drei Tage steifer Nacken but jungleman... Respect from germany
@WMCS
3 жыл бұрын
🍻🍻
@jaykent6645
3 жыл бұрын
Brilliant as usual Kevin, some excellent camera work especially right up inside the transmission tunnel showing us all the locations of the bell housing fixings. Thanks again mate. Kind regards Jay
@danielgreenbaum8875
3 жыл бұрын
U must have stomach muscles and spine made out of steel doing all these clutches on floor and not on a ramp I tip my mechanic hat to u
@barneythebear5179
3 жыл бұрын
Good stuff, top man for doing that on your back ive seen blokes struggle in a warm garage with the car on a 4 poster, Also you should do a van/toolbox video be nice to see your set up. Keep up the good graft much respect 🤟
@cetGT3
3 жыл бұрын
I dont think its a good idea for him to advertise his tools for the preying eyes!
@btaylor2112
3 жыл бұрын
Just had my Mini clutch done today. Excellent levels of professionalism all through the process with this company. Can’t praise the business enough.
@WMCS
3 жыл бұрын
Thankyou very much for the feedback.. Kind regards. K-A Williams.
@nomadicmechanic3765
3 жыл бұрын
I love the diesel heater idea 💡 I have one keeping my van warm never thought of using it on a job site
@WMCS
3 жыл бұрын
It’s awesome .,, best thing ever..,, it really blows out some serious hot air. .,, no frozen hands anymore ✨🍻🍻🍻
@maltewolfcastle4306
3 жыл бұрын
All the time I was like "I wonder how he's gonna take out the transmission..." - "oh. he just grabs it with his hands."
@nikolasvelezis3755
3 жыл бұрын
Man Fantastic ☺️ Another 1000 points from Greece for fighting like this !!!!!Cool idea the heater
@WMCS
3 жыл бұрын
The heater is goood.,, very very hot 🥵
@Hammy135
3 жыл бұрын
My sort of Friday night viewing 👍🏼🍻
@markknights5109
3 жыл бұрын
Once again .. all the gear and the idea , top man But one bit of advice plz think about goggles when you need that grinder and they didn’t you use the clutch alignment tool you have 🍺🍺🍺🍺
@andytaylor1562
3 жыл бұрын
I think some of the suppliers and tool companies should be sponsoring you Kevin
@WMCS
3 жыл бұрын
Wouldn’t that be grand Andy. Maybe one day who knows. For now it’s sealey and eBay.
@andytaylor1562
3 жыл бұрын
I love the U J you use
@aston0708
3 жыл бұрын
The master at work,,,,a joy to watch as always,,,,,I see the trolley jack has been put out to grass,,,
@WMCS
3 жыл бұрын
They had the day off .,, 😁😁✨🍻🎄
@abdullahalmamari1064
3 жыл бұрын
To you all greetings, respect and appreciation, a distinguished and hardworking man, and I wish you health and wellness💖💖💖
@WMCS
3 жыл бұрын
Thank you for the generous feedback
@studvickwicklewire8181
7 ай бұрын
best video ive seen on clutch and dual mass replacement
@romelsardar1487
2 жыл бұрын
I have no Idea what to say but you are best mechanic i have ever seen GOD bless you
@WMCS
2 жыл бұрын
Thank you. Blessing has been well received
@jimmyh1008
3 жыл бұрын
I’ve watched many of your videos now Kevin. A true professional. I too am a tech and I’ve often watched your videos and thought, surely he gets that pain in the backside nightmare job we all have from time to time. Well looks like this was one of those jobs, and still you were such a professional. Pleasure to watch your videos man.🍺🍺
@WMCS
3 жыл бұрын
Thanks a lot for the feedback. Really appreciate the support. That’s it. We take it all in our stride. One bolt at a time.
@karoln7078
3 жыл бұрын
Nice to see you using ramp not these axle stands
@SugeRealest
3 жыл бұрын
I understand u cant pick your jobs but really enjoyed this one and i can highly recommend the stubby 1/2 really powerful
@WMCS
3 жыл бұрын
Thanks for the feedback
@oscarmontero5724
3 жыл бұрын
Very good one! It should have been really fast, apart from the delay in cutting off the pressure plate. Were the bolts impossible for the impact wrench? Were they so soldered? Thanks a lot anda waiting for next!
@WMCS
3 жыл бұрын
Yes it got soo hot it melted the thrust bearing and seized the bolts to the flywheel
@jamese2424
3 жыл бұрын
@@WMCS I was curious why the angle grinder approach...Thankyou for explanation 🙏🏻
@alanharwood5966
3 жыл бұрын
Great job .but please get your self a guard for the grinder and a pair of safety goggles.have a good Christmas and happy New year
@WMCS
3 жыл бұрын
Thank you 🙏🏽🎄✨🍻🍻
@josea2286
3 жыл бұрын
Buen trabajo como siempre! Saludos desde España.
@matthiaswerschnitzki1525
3 жыл бұрын
Hallo aus Deutschland, das ist eine SAC Kupplung der „Stern“ bei 35:27 wird erst nach dem festziehen der Druckplatte entfernt! Zum zentrieren benötigt man einen kurzen Zentrierdorn. Nach dem festziehen geht der Stern ganz leicht raus. Außerdem hat sich der Nachsteller schön zu stark nachgestellt.
@johnfittis5764
3 жыл бұрын
Game as a badger you are, you earn your money the hard way. Nice to see u have a heater now at least.
@WMCS
3 жыл бұрын
That heater is a blessing I’m telling you .,, Nothing like warming up the cockles. 🍻🎄🍻
@Humzapakiz
3 жыл бұрын
Why did you cut the pressure plate?
@WMCS
3 жыл бұрын
It got so hot that the bolts welded themselves in the thread .,,
@ralphmillais5237
3 жыл бұрын
All things considered, as long as you can get right underneath the car, I prefer rear wheel drive!
@WMCS
3 жыл бұрын
They’re the quickest., easiest ., and more straightforward repairs 🎄🎄🍻
@titofernandezmeirino9832
3 жыл бұрын
How did you center the clutch disc?
@thinkoutsidethebigbox1002
2 ай бұрын
Master at his craft! Wow
@thebrother987
3 жыл бұрын
Eres un Trabajador tio! Todos mis respetos.
@utente8262
3 жыл бұрын
Bravo ottimo lavoro
@maxthecaddy8451
3 жыл бұрын
3 things you can get me for Christmas kevin, m18 fuel , same ramps you have, and one of them diesel heaters no need to rush still got 7 days lol 🎁🎁🎁👍
@WMCS
3 жыл бұрын
🎄✨🍻🍻.,, that diesel heather is the best thing since sliced bread 🍞
@maxthecaddy8451
3 жыл бұрын
@@WMCS glad you said that might treat my self to one👌
@0dbm
3 жыл бұрын
That was some funky alignment of the clutch disk Must have done that before Uses his middle finger and thumb to tighten bolts I have a new idol
@m2mark1
3 жыл бұрын
great job again and great video. You always make it look easy even though anyone who`s has done a clutch on a drive knows it`s bloody hard work. I`m interested to know why you had to grind the pressure plate rather than unbolt it and centring the clutch was not the usual tool and bolt on?? Keep the videos coming...and the ramps are great but I would be wanting some back up axle stands under there!
@WMCS
3 жыл бұрын
The clutch system got so hot from slipping that it melted the thrust bearing and almost welded all the pressure plate bolts into the flywheel thread. They were not gonna come out for love nor money .,, Thanks for the advice about the jack. 🍻🎄
@m2mark1
3 жыл бұрын
@@WMCS Jesus that must have been hot!! Typical BMW driver lol
@adivarso8175
3 жыл бұрын
@@WMCS some blocks of wood under the wheels as they weren't required to be removed on this job would be a good secondary safety measure.
@robertaccorsini4663
3 жыл бұрын
I have a Quick Jack it is very stable as long as they are parallel to one another. Very safe
@mrgrumpy5116
3 жыл бұрын
hi Kevin, well you always get one .. but I'd rather have that than pull drive shafts and all the stuff from the engine bay, hope you have a nice Christmas mate ..
@WMCS
3 жыл бұрын
Definitely agree with you. RWD over any FWD any day 🎄🎄🍻🍻
@matkliko3309
3 жыл бұрын
Kevin, you are the best. Again a great video.
@WMCS
3 жыл бұрын
Thanks for supporting the channel and for the review
@macardabirturk9380
3 жыл бұрын
beast resbect The best mechanic ever
@WMCS
3 жыл бұрын
🍻😁✨🎄🎄🍺
@gegegege7823
3 жыл бұрын
salut toujours un travaille de pro 👍👌
@WMCS
3 жыл бұрын
Merci 🎄🎄🍻
@shaunfreeman3007
3 жыл бұрын
Fantastic job Kevin happy Christmas all the best Shaun
@WMCS
3 жыл бұрын
🎄🎄🍻🎉merry Christmas and happy new year to you too Shaun. And thank you for the support
@jamesinbradford5882
3 жыл бұрын
The people that design car’s don’t give a toss about the mechanic who has to work on it !
@lesterthumwood3768
3 жыл бұрын
Love them quick lifts I’m saving up for them suckers. 😂
@WMCS
3 жыл бұрын
They’re great for RWD.
@Djm9393
3 жыл бұрын
Have you ever done a clutch repair for an evo x bro? Also, he's SAS when it comes t clutch repair I swear gets the job done right and makes it look like nothing even was wrong to begin with full send bro never lift!
@johnblackburn7673
3 жыл бұрын
Another excellent job you must be as hard as nails working in those conditions by yourself. Just one thing though, you need to give yourself a slap for not using goggles and a wheel guard on your grinder. Make sure its a hard one lol.
@WMCS
3 жыл бұрын
Thanks for the great review and word of caution John. 🍻🍻🎄🎄✨
@15mechanix
3 жыл бұрын
Que buen video, saludos desde México. 🦾
@shboul
3 жыл бұрын
MAKES IT SEEM LIKE BUTTER! keep it up!
@rumpelstiltskin7660
3 жыл бұрын
Great job
@buddhudd1054
3 жыл бұрын
Super hard worker. Working on your back is fucking hard. Terrible hard on your neck. Don't do this for too long mate. Trust me you'll regret it in news to come. ....
@caraudiosolutions
3 жыл бұрын
Please use the safety thing on the grinder God forbid if that grinding disk ever broke. Good work.
@WMCS
3 жыл бұрын
Thanks a lot. I always try and keep that in mind. I had to remove the guard because it restricted the depth it could cut through the metal plate. But I really appreciate you mentioning it.
@caraudiosolutions
3 жыл бұрын
@@WMCS i understand the disk can't sometimes reach what you're trying to cut.. but its not worth it. You should try not to be infront of the disk if ever it broke. Also saftey glasses is a must Keep up the good work Kevin 👏
@alebone_
3 жыл бұрын
@@caraudiosolutions I have found that you often can't use the guard when in tight spaces, you just have to be careful
@stottybox3185
3 жыл бұрын
A couple of things, those orange gloves you wear seem very sturdy, and dont seem to split as easily as latex gloves, what are they? Also the fluid you spray on the clutch is that brake cleaner?
@WMCS
3 жыл бұрын
Orange nitrale gloves. And brake cleaner
@dhmhkr4707
3 жыл бұрын
Wurth gloves
@autoplextint6361
3 жыл бұрын
Fantastic job bro and great video content.Just remember next time ,goggles and standard solid axle stands in case the ramp hydraulics fail. We want you safe so that you can keep earning and posting us these great informative videos for many more years to come. 🤘🏽😎👍👍👍
@WMCS
3 жыл бұрын
Thanks .,, I really appreciate all the support and feedback 🎄🎄✨🍻
@bystander1489
3 жыл бұрын
The ramp locks in place
@WMCS
3 жыл бұрын
Yes it does. It has two locking bars each side.
@autoplextint6361
3 жыл бұрын
@@WMCS oh that's great then if it locks. I was thinking you were risking it lol😝👍
@alessandropoggi9488
3 жыл бұрын
Wow. i had i mind to swap my 5 gears with a 6 ones and...well now it seems more easy than what i supposed. But more important: where have you bought-built those lifters??
@mehmetsahin9103
3 жыл бұрын
Respeckt.Harte arbeit aber machbar!.👉👍
@WMCS
3 жыл бұрын
Thankyou.
@stoiancostel5147
3 жыл бұрын
Hola amigo me gusta tu video un saludo de Madrid
@AJ-nr9zk
3 жыл бұрын
Hi pal how com u didnt remove the bolts from the pressure plate
@WMCS
3 жыл бұрын
Adam this particular one., it got so hot that it seized the bolts into the thread. The 6mm Allen key didn’t cut the mustard.
@AJ-nr9zk
3 жыл бұрын
@@WMCS Oh ok was just wondering thanks
@leondelpirineo5518
3 жыл бұрын
He si a good profesional thangs Ford te vidio greetings from Spain 🇪🇦
@WMCS
3 жыл бұрын
Helloo to you ..,
@Jose.jr28
Жыл бұрын
Muy buen video, yo cambie ayer el mio pero me costo muchusimo encajar la caja de cambios creo que fue por que no eche grasa en el primario me deje la vida para ponerla y el lo hace desde el suelo .... Tiene que estar fuerte el tio
@kevinburns5762
3 жыл бұрын
Absolutely loving all the armchair mechanics who are coming on here and telling a man who fits clutches for a living ‐ and has probably by now fitted literally thousands of them, how to fit a clutch......give it a rest lads, honestly
@WMCS
3 жыл бұрын
First post I’ve read since doing these repair videos. That is so accurate and could have almost come from my own mouth. I have been fitting on average 30 clutches a month over an 84 months period. That’s roughly a total of 2160 clutches. Now I wouldn’t want to boast. Not all my customers wants their repairs filmed. That includes Porsche. Aston Martins. A lot of comments are laughable but yours wins on both accuracy and the ability to say it well. Post of the year award 🥇✨
@kevinburns5762
3 жыл бұрын
@@WMCS honestly mate. I bet they're the same kind of people who would get you out to do a job and then stand over you telling you how to do it 🤣🤣I'm sure after 2.5k clutch changes you'll have a rough idea what to do by now😂😂😂😂
@kat0197
Жыл бұрын
Hi If you can please tell me how to put back same clutch on a place. Do I need to squeeze it somehow or just put back put gearbox and will be ok. Don't wanna to put new one because this one is 90% good.
@robertosolano8908
3 жыл бұрын
Muy bueno felicidades saludos de san Luis Potosí México 👍👍
@vlatkotasev6491
3 жыл бұрын
Hi, been watching your videos for a while now, really enjoying it. Wanted to ask you, how to test the DMF on a car and tell if its good or bad? Thanks!
@WMCS
3 жыл бұрын
You’ll know about it when it’s wrong. Juddering ., a bit of a clonk when switching engine on/off., biting point inches from the floor. You will notice something isn’t right.
@mariaperic671
Жыл бұрын
Hi guys just one question. Do we need to connect clip together on the clutch pressure plate(release bearing) ?
@smoggy1964
3 жыл бұрын
Those guns are getting bigger Kev, you been bench pressing a few gearboxes
@WMCS
3 жыл бұрын
😁🍻🎄
@RahimoDZ
3 жыл бұрын
Can you make a video showing us your tools and van layout? I found that portable scissor lift really interesting. Thanks
@WMCS
3 жыл бұрын
It’s a good solid bit of kit the quick jack ., It fits in the van with minimum space requirements ✨🎄🎄🍻
@RahimoDZ
3 жыл бұрын
@@WMCS it would be really interesting to a lot of your viewers if you make a quick tour video showing the back of the van and the tools. Keep the good work, all the best
@WMCS
3 жыл бұрын
No probs. Leave it with me 🍻🍻🍻🍻
@kamelbenouda
3 жыл бұрын
Excellent travail 🔥
@johnwayne2638
3 жыл бұрын
Hello ,i see you take the quick Jack for a bmw ! Is there a reason for ?
@johnwayne2638
3 жыл бұрын
I think with fwd you dont need to be in the middle from the car ,And with RWd you need to go further under the car.Fwd only the front in the sky.2 Jacks.rwd gearbox is deeper So you need 4 Jacks ,2front 2rear ,butt ...butt you have the Quick jack So it is easy.Butt if you juse the quick jack on a fwd car ..toe possible to So why not always juse the quick Jack?
@jonasrodrigues3454
2 жыл бұрын
VerY good Albert 👍 😁Great
@miguelneto2695
3 жыл бұрын
Nice work...
@danmcnelly5901
3 жыл бұрын
Do you not torque up flywheel bolts? Just use impact wrench? Thanks
@WMCS
3 жыл бұрын
Dan .., torque settings should always be observed if unsure of manual tightening..
@bencharles6907
3 жыл бұрын
why cut the clutch off?
@WMCS
3 жыл бұрын
It got so hot that the bolts half welded themselves in the thread .,, wouldn’t come out foe love nor money
@richfraser9459
2 жыл бұрын
Hello, I've just changed my dual mass flywheel for a single mass conversion, put everything back together how it came off and the car won't start. I did take the reluctor ring off to wipe it, prop shaft is off and wheels off the ground but everything else is as it should be...any ideas? Thanks
@a.d4911
3 жыл бұрын
Can’t help but asking Why did you cut clutch from flywheel? Are screw heads stripped? Or it’s factory stock clutch flywheel?
@WMCS
3 жыл бұрын
This particular one. It got ridden so hard. And got so hot. That it melted the thrust bearing and welded bolts into the threads.
@a.d4911
3 жыл бұрын
@@WMCS i didn’t looked that way thanks and good luck with your business it’s a hard one
@mathewwilkinson2834
3 жыл бұрын
How many do you do a week? Bet you hate spannering this time of year, i own a garage i cold weather is horrible
@WMCS
3 жыл бұрын
Only 5 clutches a week.,more than enough ., I’ve been at it solidly for 8 years now .,, I prefer it outside than indoors. .,, I left Land Rover main dealer for this .,, How’s things your end., keeping busy ✨🍻🍻🎄
@mathewwilkinson2834
3 жыл бұрын
@@WMCS god asif you worked on landrovers day in day out you poor sod lol. Yeah all good been really busy since febuary which is good considering the current situation, looking forward to a few days off though!
@John-sh9iv
3 жыл бұрын
respect from spain to,,, one question is why you cut with the machine? and why you dont use center for position of the clutch? sorry my english is bad
@WMCS
3 жыл бұрын
Clutch bolts was seized up. Clutch was too hot. I suppose as long as the plate is centre you don’t really need the tool.
@XpressCrosSs
3 жыл бұрын
i think you should use clutch alignment tool
@WMCS
3 жыл бұрын
Ok. 🎄✨🍺
@kevinburns5762
3 жыл бұрын
There's an old saying that goes Don't teach your granny how to suck eggs😉
@GP-007
3 жыл бұрын
Hello i want to ask you ,where I buy the jaks or that things with you jack up your car please, sry for my english
@WMCS
3 жыл бұрын
It’s called Quick jack. You can find it on eBay.
@francescosantangelo6614
2 жыл бұрын
Wow a great man .......
@GlossaME
3 жыл бұрын
You do understand he is teaching us at the same time?
@raitshots
3 жыл бұрын
👍 😎. Easy variant. But little size hidro car stand not good.... Your working danger moment. Garage new soon. And 5tonns hidro stand lift. Your soft work 😎 👍
@WMCS
3 жыл бұрын
Hope you managed to learn something from the watching the videos. 🍻
@bystander1489
3 жыл бұрын
Jack up the engine will give you more room because when box removed engine springs upwards on mountings
@WMCS
3 жыл бұрын
Thanks for the tip. And I shall return the favour with one. Never eat yellow snow ❄️ 🎄🍻🍻
@bystander1489
3 жыл бұрын
@@WMCS haha well get used to repairing cause that bmw model is junk
@1983woz
3 жыл бұрын
Are those quick jacks stable? Great content bro 👏
@WMCS
3 жыл бұрын
Thanks for the feedback. It all depends how stable you want it to be.
@paulmallinson6830
11 ай бұрын
Which car lift is that?
@mrkhurram786
Ай бұрын
Hi do you recommend solid fly wheel instead of dual fly wheel in 320d bmw
@WMCS
Ай бұрын
I wouldn’t personally go down that route
@mrkhurram786
Ай бұрын
@@WMCS but is it still work?
@stephenandrews5210
3 жыл бұрын
much would a e46 320d clutch and flywheel cost to change by you
@WMCS
3 жыл бұрын
Send over your details and I’ll get a quotation for you. www.williamsmobileclutch.co.uk
@martinjones849
3 жыл бұрын
Why not LUK flywheel Kevin & grinding pressure plate off?
@WMCS
3 жыл бұрын
This VALEO flywheel is a superior one to the LUK for the purpose of high speed. It cost about £150 more than a LUK would. There’s cut outs behind the top plate which allows for maximum airflow and the top plate of the DMF sits outside rather than embedded into the flywheel. This vehicle got so hot that it melted the thrust bearing and welded the bolts into the thread. It wouldn’t come out for no one., even Father Christmas., hence the tool of last resort ... 🎄✨🍺🍻
@martinjones849
3 жыл бұрын
Gotcha well done 👍
@zouk9272
3 жыл бұрын
Bonsoir c’est quoi le nom du pont que tu utilise
@Greggspies
3 жыл бұрын
Pain when your short of something and have to leave the job
@daveawhittle
3 жыл бұрын
About to tackle this job on my Mk5 Astra 1.7, any tips? Are LUK clutches the only ones worth considering?
@WMCS
3 жыл бұрын
There’s one on the channel have a look and let me know your thoughts.
@daveawhittle
3 жыл бұрын
@@WMCS can’t see a 1.7 H is it similar to the 1.3?
@WMCS
3 жыл бұрын
Not that similar .,, the 1.3 is an Isuzu. I’ll try and film one in the next few weeks.
@daveawhittle
3 жыл бұрын
Thanks, that would be awesome, mines the F23 5 speed which is supposed to be easier than the 6?
@daveawhittle
3 жыл бұрын
@@WMCS I’ve bought the LUK DMF Repset Pro, it looked like that or Valeo were the only options other than stuff that looked too cheap and nasty, is that what you would use?
@jeandiamfoumfou2549
6 ай бұрын
Bonjour mon cher ami,je suis tombé sur cette vidéo,j'aimerai savoir pourquoi vous utilisez la meule à couper ? Merci
@WMCS
6 ай бұрын
It got so hot that it welded itself
@focus678
3 жыл бұрын
How many percent do you trust this hydraulic jack?.
@WMCS
3 жыл бұрын
Clearly a 100 percent If I’m under there 😁✨
@WMCS
3 жыл бұрын
That’s why it’s me under there 😉..
@danmcnelly5901
3 жыл бұрын
Hi What size hex bit to remove pressure plate lock?
@WMCS
3 жыл бұрын
It’s a H6 Allen key.
@danmcnelly5901
3 жыл бұрын
Hi Sorry I meant the removable plate that holds the fingers in place so you can centre clutch plate Thanks
@danmcnelly5901
3 жыл бұрын
Hi I think I found it on BMW TIS H14
@philippebesnard3677
3 жыл бұрын
The video ends with a Mini ???? Very great job for this BMW, which seems to be not very comprehensive 🤣
@WMCS
3 жыл бұрын
Aha .! Glad you watched the whole thing. It’s a preview to the upcoming video 😁✨.., it’s the new 4x4 Mini Countryman SUV.
@robertchadwick5986
3 жыл бұрын
How on earth you reached some of those bell housing bolts is a wonder
@WMCS
3 жыл бұрын
With some scratches on the arm. 😆
@steveme4665
3 жыл бұрын
Hey up kev i see the portable lift is back was gonna ask where has it been? No milwaukee contact yet? Its not the 2.0 bmw we want its the skoda octavia mk111 2.0 2014 oneards getting closer to xmas now? Lol 🤔😀
@WMCS
3 жыл бұрын
Portable lift is still a valued bit of kit .,, Nothing on the horizon from Milwaukee .,, but the Skoda will be coming to a screen near you soon enough 😁🎄✨
@mtsanchez27
3 жыл бұрын
Was that a RYOBI CORDLESS GRINDER?
@cetGT3
3 жыл бұрын
AEG is much better if your thinking of!
@robtminnican
3 жыл бұрын
Whats that flexible extension thats on the end of the impact when he takes the weebo off anyone know?
@Z4loorit
3 жыл бұрын
Hiya Kevin, is it not possible to remove the transit plate before fitting the pressure plate to enable u to use the alignment tool?
@spin1275gt
3 жыл бұрын
No, youre suppose to use the proper allignment tool which is short enough to fit behind the SAC lock plate. Than you have to torque down the pressure plate and than remove the lock tool. The way he did it in this video is wrong and this BMW wont have a nice grabbing point. I was a bit disappointed to see that he did it the wrong way.
@Z4loorit
3 жыл бұрын
@@spin1275gt surely so long as the gearbox slides in (plate aligned correctly) and the diaphragm plate is tight enough, all should be fine.
@tonybalm1513
3 жыл бұрын
I can't believe they rivet the bloody pressure plate on!!!!!
@maverick507
3 жыл бұрын
Hello, what is the reference of the impact wrench? Thank you 👍
Пікірлер: 277