I never worked on a car other than changing the light bulbs. Dealership wanted $570 to replace sparkplugs. Bought the magnet plug socket and extentions, 6 sparkplugs iridium. Two small pouches antilock and silicone. $110 dollars later and this man's video. Took my time and I finished everything in like an hour and something. So here's to the dealership 🖕 and thanks to this gentleman. BTW I pulled out those back Fuse boxes and helped give me some room
@TOUGHBUILDSCUSTOMS
2 ай бұрын
Wow $570 for a plug change I only charge $120 for Hondas that’s crazy.
@cuongluu1969
7 күн бұрын
Thank you
@persingify
3 жыл бұрын
I don’t know how anyone could find any thumbs down for this video, it was straightforward, to the point, informative, no BS. Great work.
@gokusayayin8051
Жыл бұрын
Mechanics🤔.. They loose momey with videos like this🤣
@luisvaldez3901
7 ай бұрын
@gokusayayin8051 true but there's always someone who truly takes advantage and rippes you off and over charges you
@gsp49
5 ай бұрын
KZitem doesn't show thumbs down, what are you talking about?
@jdizzle1939
4 ай бұрын
It used too @@gsp49
@ethanunzicker
20 сағат бұрын
Seriously one of the best tutorials I’ve ever watched on KZitem. Gave me the exact shopping list and showed every single plug so you know which ones require what. Just replaced all 6 plugs and it’s running perfect. Thanks mate!
@ART224
2 жыл бұрын
Great video. For anyone watching who’s thinking, “I can’t do this job. There is no room to work or get anything out,” it’s actually not as tight as it looks. I was surprised, as I thought getting the coil packs out would be a lot more difficult. With the exception of the rear one closest to the driver side, the rest were easy. I used a 6” wobble extension for the whole job, which might have made life a little easier, but I’m not sure it was necessary to use on all of them. To find the rear ones, I just leaned on the engine and felt around for the 10-mm nut. The whole thing took maybe 45 min at most.
@BLDalton85
2 жыл бұрын
Damn it haha. Mines Cyl 3 (rear closest to drivers side). We have a good shop that's fair local. Going to get it to them for my coil and may as welll get new plugs too. The way it acting I'm betting coil. Thanks!
@BLDalton85
2 жыл бұрын
Wifey asked why not now, I said lets go. $70 later and apparently 42m to get it and put it on I'm glad I did. Extra stuff in the way of Cyl3 but not too bad! Thanks.
@dmcvicker
Жыл бұрын
I wish all repair videos were like this one. So helpful, no unnecessary talk. Thank you!
@igl9273
3 ай бұрын
MrRangerZr1 is my NUMBER 1 source to do DIY on the HONDA Odyssey. I learned a lot. Thank you for taking the time to make all these EXCELLENT videos!
@MrRangerZr1
3 ай бұрын
Yessirrr thanks for the support
@mikef4462
4 жыл бұрын
Just changed all the spark plugs on my 2015 Honda Odyssey (120,000 miles) thanks to this video. I doubt I could have done it without viewing the video. Took about 1 hour Thank You!
@andrewjbloom
3 жыл бұрын
Just replaced all 6 in the wife's 2011 Odyssey thanks to this video... Surprising that the hardest part for me was the clips they were on tight!
@avasonsyn
4 жыл бұрын
That hood latch trick to remove that one coil is epic! Great Work!!
@realwordsoftruth
2 жыл бұрын
I just did my wife's '15 van today. Probably took under 2 hrs, but I kept watching the video, taking my time, and trying to fish out the 10mm socket that fell when I was putting the front coil bolt nut back on. The front ones came out fine after 99K. Was trying to get it done so if there was any leaks, I was still under my 100K extended warranty. :D That said, the back ones were more of a pain. The middle rear coil was blocked by a hose and pipe. I removed those electrical connectors that you see on the video off, so I had more space for my hand/wrists to fit in there. I also had bought the 6" wobble and a flex head ratchet at a local store. The wobble one fit great for the back. The ratchet, not so great as it was a bit long and wasn't as high a tooth setting, so it kept hitting the top of the compartment for the middle and driver side one. IT worked better for the passenger side one. I ended up using a smaller ratchet that wasn't flex head. I found hand tightening with the wobble, THEN putting the ratchet on was best. That middle rear coil, trying to put it back in, actually ripped the top of the rubber (on the end but towards the top of the coil) a bit. I pulled it out a few times to make sure there was no issue, and just reinstalled it. So overall, other than the high cost of the NGK plugs nowadays, it was pretty fine. Thanks
@marke.9822
5 жыл бұрын
Thank you for sharing! Had a misfire code, changed all the spark plugs and coil pack from cylinder in code just to be safe. Watching the video gave me the confidence to do it, pretty straight forward. Much appreciated!
@MTRVCR
5 жыл бұрын
Absolutely Fantastic! I loved how you did not run on and on with narration... You know your craft! Thank you. :)
@dans4270
3 жыл бұрын
I agree. Nothing worse then trying to get info to help and having to listen to or watch someone's personal life.
@CDSutherland
Жыл бұрын
Thank you for this video. Little things like the hood latch and pushing down the hose in the back steepened the learning curve, almost as I’d done it a few times before. I took a little longer than average to get it done, but turned out perfect. Thanks again.
@Grindstaff09
Жыл бұрын
Excellent!! At what point is the wobble tool needed and will a 3" extension also work or 4 5 and 6 (the front ones)?
@anthonychase4945
15 күн бұрын
This video was instrumental in assisting me in changing the plugs on my 2012 Odyssey. The front 3 were easy. The back 3 were more difficult but not still doable. I started with the " hardest" one in the back. It was just a matter of moving the rubber tube down to slide out the parts. One thing I did not have that would have made the rear plugs easier to remove was a long handled ratchet. I only had the normal size. Gues I'll have to buy a long one. It took me about 3 hours as I just took my time. I did one plug at a time as it was my first time. My Odyssey now runs so smooth. I was having starting issues. Not anymore. Thank you !
@08civicSI4dr
4 жыл бұрын
Great easy video. I had a check engine light throwing code p0303, cylinder 3 misfire detected on my 2012 Odyssey. I followed your instruction and now it’s free of check engine light and runs good. Great video and keep up the good work. It’s because of this video I had the courage to finally change my first pain in the butt V6 engine in such tight space. Thanks
@whitneyjdodson
4 жыл бұрын
David Yang what’s the location of cylinder 3? Same here
@jimmurphy5739
Жыл бұрын
@@whitneyjdodson It's been 3 years, sure, but someone else might be looking... Cylinder 3 is the one closest to the driver's steering wheel. Right rear, as you look at it when you open the hood.
@joshuawilford9675
10 ай бұрын
VCM muzzled so you won’t have fouled plugs again
@johandurham8512
3 ай бұрын
@@joshuawilford9675 I'm about to do this to my 2011 odyssey as cylinder 1 has failed several times over the past 2 years, hopefully this solves it
@brookieeH
Жыл бұрын
Best repair video I’ve ever used. So amazingly put together! Great job and thank you!
@midasvalo4021
2 жыл бұрын
Thanks for the great video man! Helped me get it done. Used a deep 5/8 spark plug socket with rubber fitting inside to hold plug secure while replacing them. I used a half inch socket set; 2x swivel joints with a 3" extension in between with the plug socket on the end. Easily snaked into the holes. Tough plugs were: front right- hold hood latch up to get out; back center- tight fit- flex up to right; back right- flex hose away. Number one thing for me was don't drop the nuts or tools; move very slowly and deliberately so you don't bump something and drop what you're holding. Thanks for all the help man!
@codyfullmer6869
2 жыл бұрын
Dropped my wrench down the back on my last plug. Found an alternative to finish the job. Then found a big dip to jump the van off of. I was then happy to hear the wrench skipping along the pavement 👍
@onjofilms
7 ай бұрын
Everyone below me already said it, but I'll say it again, Excellent Video, straight, to the point, no clowning or long drawn out jabber, just work. Excellent my man, excellent.
@bogdans7287
4 жыл бұрын
Nice video. Like many here I saved a bunch of money watching your procedure. One tip . For me I had to use a simple 10mm wrench ,instead of the ratchet, for the back coils.
@anslicht4487
4 ай бұрын
Thank you! Great video with _no pounding rock music_ . I don't mind a narration but you didn't need it. I haven't decided to do this myself but now understand exactly what it would take. Back in the day I could just jump in the engine compartment next to my Comet 6-cyl and replace plugs in 20 min. Good thing because I had to fix something every week. Everything has changed.
@birdbrain7429
Жыл бұрын
Awesome, watched a few videos on the same topic and found this one to be the new standard in diy repair videos. Thank you for uploading it.
@jeffro1200
6 ай бұрын
Thank you, for a wannabe home mechanic this was very helpful for me. I was able to successfully change out the cylinder 1 spark plug because of your video. Appreciate it!
@avasonsyn
4 жыл бұрын
Followed your video...it was extremely helpful. For those not thinking they can do it? It is as simple as this guy makes it look. Thank you!! Thank you! Thank you!!
@michellejones1469
3 жыл бұрын
What a great video! Straightforward, not a bunch of chatter, subtitles and angles helped!
@Gilmapaiya
11 ай бұрын
This is one of the best Videos I have watched on KZitem on Car repairs may be even the top 10. Very Clean , methodical and extremely useful. No wasted dialogs. Excellent camera to capture cleanest procedure. Keep it up!
@johntincher2642
Жыл бұрын
Your video was a life saver! I have never like working on the other side of the motor where I could not clearly see what I was doing. But your video showed it could be done - and so I did!! Thanks again!
@daviddahill8364
7 ай бұрын
This should be the standard for DIY videos. Thank you.
@davidjoyner7393
Жыл бұрын
I just replaced the plugs on my 2013 Honda Odyssey. Found this video to be very helpful in refreshing my memory from the 1999 Odyssey. A couple of things though.... The front side is easy. The only problem I had was getting the coil wire connector off the coil. The looked so easy on the video but really hard in the real world. My trick that made it easy was to use a pair of needle nose pliers to gently squeeze the connector in the spot that releases the connector and then pull gently. It came right off then. Evidently Mr Ranger knows exactly where to squeeze. The back side are much harder then the front due to all the congestion, you can't see what you are doing, and those sharp coolant hose clamps. I could not get the coil wire connector off until I took the coil nut off and pulled the coil assembly out so I could see the connector and get the needle nose pliers on it. Then it came offeasily. The whole project took just over 2 hours and I think if I did it again I could cut an hour off. I saved about $325 doing this myself. All it cost was the plugs (had all the tools required) and a little skin. Thanks MrRangerZr1 !
@MrRangerZr1
Жыл бұрын
Just be careful using pliers on the connectors, sometimes you can break the connector.
@davidjoyner7393
Жыл бұрын
@@MrRangerZr1 I was very gentle for that reason! Evidently my big fingers combined with the small? Target that releases the connector to slide off gave me problems. Using the needle nose gently did the trick as it came off easily then. Interestingly after 103,000 miles the old plugs compared to the new ones still looked fine. I have noticed no change in performance or MPG after driving several hundred miles. I had read some internet comments on other blogs about how the cylinder disabling was causing major problems and folks were disabling it with aftermarket devices that fooled the ECM into thinking the engine had not quite reached operating temperature. The plugs all looked the same to me. I'm old enough to remember changing plugs every few thousand miles. Nice to get over 100,000 easily on a set even though they are hard to change! Thanks again for the great video.
@braun1761
5 жыл бұрын
Thanks for your video. I had to replace an ignition coil and I was nervous about reaching the back of the engine due to space and visibility. From your video you made it look easy and I got the job done this afternoon. Plan on changing the plugs after the new year.
@lonnyyoung4285
2 жыл бұрын
I just lost my #2 coil pack on Christmas day. I am going to replace it later today. This makes it look easy (I have done far more complicated repairs than this), but was worried about having to replace one on the back side. Glad it shouldn't take me too long.
@martinradtke5181
4 жыл бұрын
Doing my 2015 Odessey today; front plugs done. Now the rest....I'm using wife's mirror to see the back of engine. You've definitely done this engine before. Hardest plug R&R was my bullet proof 1992 V6 Camry. My back let me know! ☺️ I need to see before I feel around. Good video.👍
@fmmatty
Жыл бұрын
Thanks so much for this video. Very helpful. Really liked how simple and straightforward it is. Got mine resolved in about an hour.
@jamescourier1545
10 ай бұрын
Outstanding tutorial. After watching, I fearlessly replaced the cause of my misfire- the plug for cylinder #2- its the middle one in the rear. I used a "lesser" Autolite iridium for this as a temporary fix. I have a full set of Denso Iridium arriving soon, but will not install them until the S-VCM controller arrives. I am 100% certain that the VCM system is flawed and must be disabled to prevent this misfire nonsense from happening. The van gets ridiculously good fuel mileage so if MPG takes a slight hit for the sake of dependability, so be it. I used a 6" wobble extension and a 5/8" spark plug socket with the rubber insert. Thank you.
@alanmixon1665
2 жыл бұрын
Thank you so much for this video. Exactly what this non-mechanic needed!!!! Keep up the great work!!!
@jnix112
3 жыл бұрын
This was great! The angles and subtitles really helped. I was able to do mine in about an hour. Thanks!
@pdogakron1623
3 жыл бұрын
When I had my 2004 Odyssey, I did the plugs no problem. For my 2017, instead of a 6" wobble, I used (2) 3" socket extensions. Not sure if your Odyssey was an LX or a different year, but it seemed like I had a much tighter area to work with, lots of hoses, AC lines to deal with. Almost gave up before I did the rear, but it wasn't as bad as I thought, was intimidating doing everything by feel.
@noellofland9206
9 ай бұрын
Thank for this. Ive had my 2016 Odyssey for a little less than 2 years and about 3 weeks ago she went bananas, all dash lights flashing and running rough. I took her to a shop and paid $497.00 for 1 bad sparkplug and coil. 😐 Then, 2 weeks later same situation. This tutorial helped me to change out the other 5 plugs for $40. 🙂 Easy to follow and no annoying blathering on. Thank You!
@chrishogg7233
8 ай бұрын
Did the new plugs fix your issue? Im trying to get my dads Odyssey straightened out. Doing the VcM muzzler as well as new plugs
@eyeheartsushi2212
7 ай бұрын
@@chrishogg7233I need to read up about the VCM thing. Seen it come up on blogs, etc.
@johandurham8512
3 ай бұрын
ouch, was it the dealership that charged $497? I had to do several at local shop and always $200
@noellofland9206
3 ай бұрын
@@johandurham8512 local shop. only place I could get it in and fixed asap. Which didn't really fix it but for a about a week anyway. In the end we ended up getting a vcm turner which I didn't know anything about before coming across info on the honda odyssey forums. It's been worth every penny. I would definately recommend.
@johnjlee24
Жыл бұрын
Great straight forward video to fix misfire - my code was P0301 for first cylinder. Replaced the coil in 1st cylinder, watching this video made it very much possible. Thank you
@scifigirl74
4 жыл бұрын
Your video saved us at least $600. Thanks!
@chasewestfall3523
8 ай бұрын
this video was a HUGE help! thanks for making! I found that i didn't need the flex head wrench or addtional 3" extension, just the 6", the deep socket, and a short-handled wrench, but also see how it could have been easier with those additional tools
@MrJkgrice71
4 жыл бұрын
Great job. The 3 in the back of the engine are a little tricky but we got her done!
@ACDC4LIFE
5 жыл бұрын
Telescopic Magnet is a life saver ! Also great if you happen to drop a bolt or nut down in engine bay saved me numerous times 😂
@pa-panamericano8802
4 жыл бұрын
I just got one at the dollar tree... Great deal
@garypritchard9787
3 ай бұрын
I would be dropping the coil nuts many times. You make it look so easy!
@StevenT.Stamper41
3 жыл бұрын
Thanks 👍 best video I have used yet. You know what your doing and don't have to blab on about what you are doing. I appreciate it.
@eyeheartsushi2212
7 ай бұрын
Perfect video. Replaced my Odyssey’s spark plugs and ignition coils today. Thanks!
@ef3742
5 жыл бұрын
Thanks for this video, the magnetic telescopic tool is a must.
@yaxpac2
3 ай бұрын
Exceptionally Clear and thorough video! Thank you!
@mrblack1505
Жыл бұрын
Top notch video. Helped me change a coil out in 15 minutes. Thanks!
@Dabodizafa
9 ай бұрын
Let's go Browns!!😜
@jonmarks9938
Жыл бұрын
Very helpful. I never even knew wobble extensions existed. Thank you.
@TeeDeeDubya
2 жыл бұрын
I have no clue how you got the middle ignition coil in the back out so easily. What a pain! Great video!
@kenrummel8208
6 ай бұрын
ya, me neither. Still haven't got #2 out.
@nsgibson
Жыл бұрын
Thanks for the vid! Replaced plugs today in about 2 hours.
@kbl484
2 жыл бұрын
Thanks for the video. Just finished mine 2016 Odyssey. Everything was spot on!
@jpneal10
3 ай бұрын
Absolutely fantastic video. Amazing how videoed the back three.
@tonykcgee
3 жыл бұрын
best instructive and detailed video, I watched many related videos, this video offered extra detail where it was needed. so good is this video that i had to comment
@jamesdamenti2092
5 жыл бұрын
awesome video, just replaced spark plugs on my 2014 Honda Pilot, followed your instructions verbatim....really made it relatively easy!!! Thanks so much...!!!
@MrRangerZr1
5 жыл бұрын
Thanks! Not verbatim btw...
@jamesdamenti2092
5 жыл бұрын
verbatim et literatim[wer-bah-tim et lee-te-rah-tim; English ver-bey-tim et lit-uh-rey-tim] adverb Latin. word for word and letter for letter; in exactly the same words.
@MrRangerZr1
5 жыл бұрын
Ahhh ok lol I thought you were referring to the verbatim on the odyssey forums. my bad.
@Face2FaceHardware
4 жыл бұрын
Great video. Straight to the point - thank you 🙏
@dennisdunn9315
4 жыл бұрын
Awesome.. super helpful. I had a spark plugs socket with rubber insert. If you have one, take the insert out and use magnet. Mine came off on the new spark plug and didn't notice. I then put coil on, well tried. It wouldn't seat flush. That's when I realized what happened. What a nightmare trying to get that rubber insert out
@MrRangerZr1
4 жыл бұрын
Exactly. Those rubber ones are dangerous, imagine if it gets stuck in one of the rear plugs...
@Cocobutterhoney78
Жыл бұрын
Thank you for posting this video I appreciate the process and clarity to it all! Thank you!
@MrSmitty007j
Жыл бұрын
Glad to see it’s not hard on this one. Thank you
@ROADPRO1
4 жыл бұрын
Thanks for a amazing video. Like so many other comments you greatly help me. Much appreciated!
@deasttn
5 жыл бұрын
Thanks. I just picked up a used 2012 Odyssey and plan to replace my plugs soon. Looks like I may have an excuse to buy a new ratchet
@MrRangerZr1
5 жыл бұрын
Flex head ratchets really shine when working on modern cars.
@naisn88745
2 жыл бұрын
Thanks Dude. You made it look simple. No BS😀
@jakemartincic
Ай бұрын
Excellent video, brother! Super helpful
@DrJay-mh3ux
3 жыл бұрын
This is good and informational video. Thanks my dude!
@rkraeling
2 жыл бұрын
Thanks for your video. I had a misfire on #1 and this helped me immensley!
@michaelburnham4569
3 жыл бұрын
Straight to the point, awesome!
@dipbleu
3 жыл бұрын
Thank you so much for uploading this video!
@MostlyEmpty
Жыл бұрын
This video saved the day!! Thank you so much for such a detailed video. I had never worked on any car, and this was an excellent guide to use! 🙏🏼
@leochen4891
5 жыл бұрын
Amazing tutorial. Thanks for the work.
@timothyhan1009
2 ай бұрын
I highly recommend to use 1/4 ratchet due to not enough space in engine room.
@luvansmile
4 жыл бұрын
Thank you so much for the video I saved a lot of money.
@kamz2374
6 ай бұрын
The sparkplug on the backside of motor looks like fun. Lol😊
@juniorastros
11 ай бұрын
Thank you for posting, very helpful.
@CanikFanatik22
3 жыл бұрын
Thank you for sharing this video. I just received a check engine Misfire for cylinder 2. I wanted to see how easy it would be to get to the rear three plugs. I'm hoping it's just the plug and not the coil
@deasttn
3 жыл бұрын
You'd better hope its the plugs or coils and not the rings.
@Carlos-ri9ix
4 жыл бұрын
Great video. I gotta do this in the Spring.
@soterios
3 жыл бұрын
Just did it thanks to your video. Thank you!
@TheOREGON1859
2 жыл бұрын
Excellent camera work.
@dans4270
3 жыл бұрын
Thank you! 👍👍👍👍
@chrisdonner5791
2 жыл бұрын
Great help! Thank you.
@kae36
3 жыл бұрын
Thanks for posting this! I need to fix a fouled plug on my 2011 Honda Odyssey. The Fouled Plug fix from Honda Service doesn't seem to fix the problem.
@MrRangerZr1
3 жыл бұрын
Disabling VCM is the permanent fix: kzitem.info/news/bejne/pZutu4KNpZpirYo
@MakGuyver
5 жыл бұрын
Thank you so much of your detailed video. Just saved bunch of money. Hehe.
@bdinfl2071
5 жыл бұрын
Great video - thanks. My plug threads in front were dull orange, but the back 3 were shiny, maybe slightly moist - is that a potential problem?
@MrRangerZr1
5 жыл бұрын
Most likely caused from the VCM system. Read this: www.odyclub.com/threads/vcmuzzler-ii-for-disabling-vcm-faqs.268778/
@guntermihaescu3707
4 жыл бұрын
Great video, thanks so much! I was able to get all the plugs out and just wrapping up. How much is 16 lb ft of torque by feel? When you're installing the plug on the front side, it doesn't even look like you used the socket wrench, that can't be right, is it? In the rear it looks like you did give it a pretty good tighten with the socket wrench. Any insight to feel greatly appreciated. Thanks again!
@MrRangerZr1
4 жыл бұрын
I would suggest getting a torque wrench and torque another bolt on the side to get a feel for it. It's not much honestly, however I tighten in the video, that's it.
@jayicg6189
5 жыл бұрын
If the #2 & #3 are fouled you may have an oil leak from the piston rings. Its a known Honda problem. Check for the class action lawsuit settlement. Do your research and get a VCM Muzzler to prevent further serious maintenance problems.
@aikz5
3 ай бұрын
Great video, thank you
@Nattyuce685
2 жыл бұрын
About to press play Findlay Honda in Las Vegas is asking $400 for spark plug replacement 🤦♂️ hope this is pretty simple
@moreirr123
3 жыл бұрын
Amazing video!!! Thank you so much!!! No misfire anymore, but light still on on the dashboard.... any suggestion?
@MrRangerZr1
3 жыл бұрын
Should go away after 3 drive cycles. If not, you have another issue.
@moreirr123
3 жыл бұрын
@@MrRangerZr1 thank you again!!
@tijanaharris3860
5 жыл бұрын
Thank you so much for this video!
@lewisdundas1281
Жыл бұрын
Thanks for this great video
@stephenbardzilowski6618
3 жыл бұрын
Thank you for the video!!!
@ToughCowboy
4 жыл бұрын
How long should this take for 1st time plug change? Any watch outs - beside engine cold and don’t crossthread plugs? And thank you for listing out and linking each of the tools and supplies used.
@MrRangerZr1
4 жыл бұрын
Mike Amend I would say 1-2 hours for a beginner. Nothing else really, if you watched the full video you’re set :)
@Justin-qu5wr
5 жыл бұрын
Very helpful, thanks.
@gregcrabb3497
Жыл бұрын
I need to do this to a '17 Acura MDX, should be pretty similar.
@MrRangerZr1
Жыл бұрын
Basically same engine
@JayKBra
5 ай бұрын
Thank you
@MitchellGraff
Жыл бұрын
Great video - looks a little challenging, and requires some tools I don't have, but looks like a good project and something I could do. Wondering if my original plugs with 115K on them will come out! Anyones thoughts?
@MrRangerZr1
Жыл бұрын
Should come out no problem
@newcreationNB
5 жыл бұрын
Great video 👍👍👍
@anthonychase4945
15 күн бұрын
What length is that long wrench with rhe black handle ?
@Grindstaff09
Жыл бұрын
Excellent!! At what point is the wobble tool needed and will a 3" extension also work or 4 5 and 6?
@MrRangerZr1
Жыл бұрын
You'll see when you do the job lol that small flex of the extension helps a lot
@ejt719
5 жыл бұрын
You think a wobble extension is really needed? How about a swivel adapter and a 3 inch extension?
@MrRangerZr1
4 жыл бұрын
You can do it with a swivel but I don't recommend them because they are weak.
@sris78
2 жыл бұрын
Hi, Thank you so much for the detailed video. I'm planning on getting this done and want to do it myself. can you please suggest if there is any specific ones i can buy or i can get anything from my local store. Can you please advise. what i'm seeing is some iridium ones, Copper OE ones. if you can please let me know i would like to start there and try this myelf
@MrRangerZr1
2 жыл бұрын
The correct ones are listed in the description. Thanks
Пікірлер: 261