A quick video tutorial on how to remove and replace the tail light / brake light assembly on a 2015 - 2020 GMC Yukon and Yukon XL.
The GMC Yukon owner's manual contains the following information on the removal and replacement of the tail light / brake light and reverse light:
The taillamp on this vehicle is an LED. For replacement, contact your dealer.
To replace one of these bulbs:
1. Open the liftgate.
2. Remove the taillamp closeout cover from the lamp assembly by pulling rearward from the top and bottom at the same time to unfasten the snap tabs.
3. Remove the two screws from the taillamp assembly.
4. Pull the taillamp assembly straight back to remove.
5. Turn the bulb socket counterclockwise to remove it from the tail light assembly.
6. Pull the bulb straight out from the socket.
7. Press a new bulb into the socket, insert it into the tail light assembly, and turn the bulb socket clockwise until it clicks.
8. Reinstall the tail light / brake light assembly and tighten the screws.
9. Reinstall the tail light / brake light cover by snapping it into place.
This video tutorial will show you how to remove or replace the tail light / brake light on the following GMC models:
2015 GMC Yukon ( SLE, SLT and Denali )
2016 GMC Yukon ( SLE, SLT and Denali )
2017 GMC Yukon ( SLE, SLT and Denali )
2018 GMC Yukon ( SLE, SLT and Denali )
2019 GMC Yukon ( SLE, SLT and Denali )
2020 GMC Yukon ( SLE, SLT and Denali )
Find a Locksmith in your area with www.LocateALoc...
Негізгі бет 2015 - 2020 GMC Yukon Tail Light Removal - How To Remove & Change Brake Reverse Light Taillight
Пікірлер: 107