Love my 2016 kx450, bought one a few months ago. Had an 07 before.
@andrewmulligan7309
2 жыл бұрын
Hell yea those kick before it started must have been stressful
@wolff_family_adventures
2 жыл бұрын
After the 10th or so. Then it popped off.
@kyler_hawkey
2 жыл бұрын
Awesome video! I love the detail! We need to get going on the KZitem vlogs! I only say that on average once every day lol!
@wolff_family_adventures
2 жыл бұрын
I've been saying the same thing lol.
@joshuablackburn3555
Жыл бұрын
Love the video! built a 08 250f from scratch like this. Did you go off the service manual for the 16? I have project bike im working on like this but fabricating the frame to fit the motor. I'm calling it the kawazuki. 08 suzuki 450 frame with all the goodies for the 18 450 kawasaki motor lmao.
@Texas_Vril
2 жыл бұрын
Nice brother
@wolff_family_adventures
2 жыл бұрын
Thanks
@troolllllinnnzaragoza3169
9 күн бұрын
How much to rebuild my motor?
@mitchellfam419
2 жыл бұрын
Anyway to a copy that's not sped up
@whitelivesmatter1982
2 жыл бұрын
I’m having problems getting the nut off my flywheel could I be doing something wrong you made it look to easy
@wolff_family_adventures
2 жыл бұрын
I used an impact to remove the nut, but if you are having troubles; try applying some heat to the nut itself. It could have locktite. Dont overheat too much, you don't want the nut red hot. but heat it enough where you can not touch it. Use an impact and give it a try. If you have the top end off, hold the piston so it doesn't smack the cases when you try to take the nut off. Hope this helps.
@whitelivesmatter1982
2 жыл бұрын
@@wolff_family_adventures for sure will give it a try hopefully this works thanks 👊
@lucasschulz6075
10 ай бұрын
tac tac tac e não pega
@mxdronefpv
Жыл бұрын
What is the point to take down every thing just to make engine rebuild? Even not clean and polish the frame 🤦
@wolff_family_adventures
Жыл бұрын
So that I I can get you to leave a comment lol 😂. I cleaned the frame and replaced any worn-out parts. I didn't need the 6 or 9hp from the polish.
@FUK-ULEZ
27 күн бұрын
@wolff_family_adventures I think I just brought a bike from someone with that attitude, he claimed it was a well maintained bike. Anyway I stripped the bike completely, it's like a horror show, the linkage bearings just fell out, the steering stem main nut was hand tight, both front and rear calipers seized, notched clutch basket, throttle and clutch cables u/s. A complete tear down once in a while is very wise IMO and stops future problems from happening down the road. Besides its not that much more work. Anyways good job sir
Пікірлер: 17