The title says 2021 F150 and in your intro you say a 2020 F150. I am looking for the 2021 mud flaps and wanted to be sure if I used the part numbers given here that they would be the correct ones. Thanks for the video, watching this will sure help me with the installation.
@FordBossMe
3 жыл бұрын
I put out so many videos for people on here to learn from that I do make mistakes sometimes so I will reconfirm in the morning pretty sure it's a 21
@FordBossMe
3 жыл бұрын
You get caught in the moment and there's not a lot of people that want to put on videos teaching other people how to do things I do that every day multiple times a day so things sometimes get a little exciting
@FordBossMe
3 жыл бұрын
Here I did the homework ebay, they are the same, says they are for a 2021
@@FordBossMeI completely understand. It certainly wasn't my intent to find a mistake and point it out. Just wanting to be sure what year truck I was looking at and getting the correct parts. Nothing but appreciation and gratitude for the effort you and others put into what you do here. Thanks for the response!
@craftedworkshop
3 ай бұрын
This is why I love KZitem, there is a video for everything! Thanks for the help, should make installing these on my Lightning much easier.
@FordBossMe
3 ай бұрын
Hey thanks for stopping by
@chriswood6218
Жыл бұрын
Without a doubt best video in these hands down. Thank you FYI 2022 trucks ( I got one ) only comes with 1 hole drilled in the rear so you either drill it out or leave it alone
@churro9623
Жыл бұрын
I ran into that issue tonight. Was super confused wondering if I had the wrong ones. (‘23 tremor)
@sgt.grinch3299
11 ай бұрын
Thank you. Watching the video answers questions I didn’t know to ask by reading the directions.
@seagullsbtn
2 жыл бұрын
Thanks for posting this. I've just ordered my mudflaps. Keep these accessory videos coming!
@michaelnelson2951
2 жыл бұрын
Great video that no one else shows for the rear metal flap bar installation, keep up the great videos.
@DEDBRD-di4yj
2 жыл бұрын
Great video !!! Ford needs to have a link to this video instead of those “infucksions” they send with the mud flaps !
@dsmreloader7552
2 жыл бұрын
On 22 XLT had to drill through the plastic piece behind the wheel for the second hole, kinda a pain with the wheel on. Also only two push in fasteners on the underside of the rear fender so take out both not the 1st and the 3rd. But this is a great video, much better explanation than the hieroglyphics that come with the flaps. Straight and to the point, made install much easier and quicker.
@chadlamarche3721
2 жыл бұрын
I found it easier to completely remove the black plastic skirting to line up the holes on the skirt and mud flap to drill the hole.
@MLef111
Жыл бұрын
Great video. The 2022 models don’t have that second hole and screw beside each other. Not a big deal just needed to make one through the plastic.
@lend5600
7 ай бұрын
Great video. I just installed these mud flaps on my 2023 F150 following your instructions to the T and the install went perfect. The instructions in the box were clear as mud, just like most of the instructions Ford sends along with their accessory parts. The only difference I encountered was my truck (2023 Super Crew), only had 2 push pins to remove on the bottom piece of the trim versus 2. I’m thinking that was because of the short bed. Nonetheless it wasn’t a problem. I mounted the metal bracket on the 2nd hole instead of the 3rd and it worked out perfectly. Not sure I like the design though. I can see mud and snow getting jammed in between the top of the mud flap and that bracket but we’ll see.
@diesel6594
Жыл бұрын
Just got my mud flaps went through the instructions and I was like whaaaaat? Great video, thank you
@FordBossMe
Жыл бұрын
YVW
@SALEEN961
3 жыл бұрын
Thanks for the install video, the printing in the instructions was so bad that I couldn't tell what any of the pictures were of. It was over 100* today with high humidity so I'm glad I didn't have to stare at the parts and figure it out for myself while working outside.
@chasinspring
2 жыл бұрын
Look at instructions, bar goes on TOP of body, not in between plastic and body. Tape folds around body to protect it.
@FordBossMe
2 жыл бұрын
You have the new kit the early kit didn't have that, Things change and directions are changed in ANYTHING to make things better If I tell you something is a certain way that's because it IS
@softenerguy
6 ай бұрын
Thanks for the video. I installed Ford flaps on my 2018 and the process was almost identical. The 2018 kit came with only 2 screws each side for the rear instead of 3. I think if I used a 2021 kit it would have been better with the 3 bolts instead of using a plastic push plug in the other hole.
@timbrown4001
2 жыл бұрын
Thank you buddy with your assistance putting my mud flaps on was no problem my brother
@FordBossMe
2 жыл бұрын
Yvw and thank you
@busterbuilding
Жыл бұрын
The rear mud flap kit I got from Ford included two clear plastic strips to prevent aluminum / ferrous metal contact on the brace, possibly leading to corrosion.
@Tatman1212
3 жыл бұрын
Thanks for posting this. The Instructions for the rear mud-flaps were not very clear. The fronts were easy.
@davek2178
6 ай бұрын
thanks so much for the video, gonna install onto my new 150 lightning today
@kodyh23
7 ай бұрын
Thank you for posting this video! Very informative.
@alant956
6 ай бұрын
Thanks brother….great how to….Cheers
@joeroberts1016
4 ай бұрын
Great video! Thanks for sharing!
@rickenstrom6152
2 жыл бұрын
Excellent tutorial. Thank you, sir!
@kenbrown3740
3 жыл бұрын
Nice video, thank you for sharing your expertise!
@FordBossMe
3 жыл бұрын
You are welcome
@harpmans
9 ай бұрын
Thank you so much for sharing this! Perfect!
@jeffw.253
Жыл бұрын
Awesome job, thanks for all your help👍
@billhelmick9721
2 жыл бұрын
Great video made install easy and fast. On my 2021 XLT. Well would have been fast if I didn’t have to spend a hour looking for the 2 bolts I dropped in the grass. LOL. I used the Ford points and got front and back mud flaps and rear wheel liners for $85 all genuine Ford parts and doesn’t void corrosion warranty. A couple of tips I used the handle of a screw driver to push the clips on easier on the hands and just seemed easier all the way around. Also push the mud flaps tight against the body of the truck while putting clips on and tightening the bolts to the body.
@FordBossMe
2 жыл бұрын
Good deal
@marcin97
2 жыл бұрын
where did you get it for so cheap??
@billhelmick9721
2 жыл бұрын
Marcin97 I bought from the dealer using Ford points I received when I bought the truck. It fords reward program. You get points for things you buy and for service visits. I got 42k points for buying the truck and at my dealer that was worth $210 in discount.
@glmorley
3 жыл бұрын
Nice job. The materials for the rear flaps I purchased from my local Ford dealership included two strips of adhesive tape, and the instructions indicated the tape is placed between the fender and fender molding. Since you didn't mention this, I didn't add it...probably doesn't make a difference.
@FordBossMe
3 жыл бұрын
Yeah the parts I showed you in the kit here is exactly what came with it
@FordBossMe
3 жыл бұрын
So maybe they updated the kit
@markusvt1
2 жыл бұрын
It goes between the bracket and the fender to protect the paint, (not between the fender and the molding).
@henryford2736
11 ай бұрын
Except they don't fit on Platinum because it's got extra molding around the wheel well.
@sodapuffs
9 ай бұрын
Easy peasy..thank you.
@ande250
2 жыл бұрын
Thank for for the video! The ford instructions sucked and after about 10 minutes of me saying wtf I headed to youtube lol
@user-le8fk4ix4h
9 ай бұрын
Thanks that was a lot of help
@mario4892
Жыл бұрын
amazing video thank you for this 💯
@jfp778332
Ай бұрын
Thanks dude!
@1970351C2V
3 жыл бұрын
Will be interesting to see how those monoleaf springs do long term.
@FordBossMe
3 жыл бұрын
we shall see, so of the big trucks run mono in some instances so we shall see
@GR018
3 жыл бұрын
Good video. Do these flaps stick out a little further to aid with wider rims? Just put a set of 10" wides on my 2021 and it's clear that I'll need a good set of flaps.
@FordBossMe
3 жыл бұрын
Yes they do still got a little bit
@matthewbaynard
Жыл бұрын
I still can't figure out what the two strips of stick-on film are for and why they send you a 2' zip tie with the kit too.
@FordBossMe
Жыл бұрын
So the two pieces of stick-on film are to protect the paint that you put the clip on and the zip tie I don't know but what I can tell you is the kit may change little by little as it progresses
@paulmoreno493
4 ай бұрын
I am getting ready to install my set, did you find out what the zip tie is used for? Mine also has a zip tie?
@stevet6217
3 жыл бұрын
Good and very helpful video, but I wish you showed a better view of how they look on the vehicle from standing back
@FordBossMe
3 жыл бұрын
I did what I had with the time I had so
@boblenweaver3166
3 жыл бұрын
So the two upper flaps fold to protect the paint/metal form the clips.... BUT the lower two just have the clips chew into the metal.... FORD
@FordBossMe
3 жыл бұрын
Unfortunately they don't give any protectors for that so you're right there is a couple little small indentations that happen but they're very small, I'm sure if people had like some cloth tape they could line that up first and then push those on and that would help.
@jmercer74
2 жыл бұрын
Appreciate this video, help so much
@FordBossMe
2 жыл бұрын
Yvw
@CapeCodTrainTodd
4 ай бұрын
Well done. I'm usually pretty good with this kind of stuff but the instructions that came with the flaps are lousy. The fronts were easy but the back ones? Did Ford conspire with IKEA for the directions and then threw out the plans and let someone that has never been near a truck draw them up??
@scoottersamx
Жыл бұрын
2023 F150 KR has only 1 hole instead of 2 on the bottom part of the flap for 2 screws like he shows…
@tinkertrek
3 жыл бұрын
Good job on this video.
@hbudsmalley6317
2 жыл бұрын
TY TY TY. The printed "directions" are crap! This makes it soooo easy.
@barry3045
Жыл бұрын
the first clips, the ones that look u shaped, do you know what those are called, and if they can be bought seprate ? thanks.
@FordBossMe
Жыл бұрын
I don't know honestly I found these parts.ford.com/shop/en/us/hardware-and-fasteners-71564-2/clip-9343979-1
@hectorchavarria633
3 жыл бұрын
Hi Fos Boss Me, great video! buddy out of topic.. by any chance do you know if the sunroof panels of a 2021 F150 are the same for the 2020. dealer does not help and I have broken the 2 pcs and currently there is a back order, I measured the glasses and the opening of the moonroof and measure the distance of the screws of the glasses and to me they are the same. any thoughts?
@FordBossMe
3 жыл бұрын
If you remind me in the morning I can look that up for you if my parts guy willing to do the work for me
@hectorchavarria633
3 жыл бұрын
@@FordBossMe sure thing I will.. I really appreciate the quick response. I measure the glass from another F150 from previous year and it is the same length! par number for 2021 is ML3Z-16500A18-A and the part number for a 2020 it is Fl3Z-16500A18-A any thoughts I will really appreciated as dealer does not help. send a message here in the morning or where do I catch your attention. I really appreciated.
@hectorchavarria633
3 жыл бұрын
@@FordBossMe hey my friend here I am ! Would you please check with you part guy and see if can help me to find out what are differences on the 2021 F150 sunroof glasses vs previous generation please. Seems to bolt on each other, but not sure if I could use the previous gen as the 2021 are in back order without an ETA
@reynaldovazquezfigueroa4525
4 ай бұрын
Ford boss. Nesesito unas loderas para la Ford Ranger argentina año 2005. Cómo. Puedo ser el pedido
@peeblestim
3 жыл бұрын
Same as the install on my '17.
@FordBossMe
3 жыл бұрын
similar or same depending on kit
@dustin9035
3 жыл бұрын
That customer must really like his truck. If so, he'll be back in a year asking for a set of billsteins for the rear. Best thing I ever did to my truck. The stockers are terrible, especially when you tow a trailer. Best part is you can swap them out in five minutes.
@FordBossMe
3 жыл бұрын
Agreed, billsteins are top notch
@DogFace69
Жыл бұрын
Weathertech are a lot easier to install.
@northlander4370
3 жыл бұрын
did you use to two clear plastic strips on the rear
@FordBossMe
3 жыл бұрын
what I had in the video is exactly what came in each kit I had
@FordBossMe
3 жыл бұрын
I showed everything I used
@northlander4370
3 жыл бұрын
@@FordBossMe thanks...mine came with two plastic strips...one for each brace to protect the paint...i am guessing
@FordBossMe
3 жыл бұрын
@@northlander4370 oh yeah I specified in the video that you fold the strips over
@FordBossMe
3 жыл бұрын
The strips that protective paint are actually bill on to the mud flaps so there's no clear ones they're just already maydan and you fold them over
@brucegruben140
Жыл бұрын
I have a 2023 bracket is on top is it supposed to go in between? Little plastic piece goes on the very bottom?
@FordBossMe
Жыл бұрын
I haven't done a 2023 so I can't tell you I think some people have said in the comments that they did so you might be able to read through the comments and find out
@NoShadowOfDoubt1
Жыл бұрын
Epic again
@johnvetter8963
3 ай бұрын
Dam good video
@FordBossMe
3 ай бұрын
Thanks
@Merchantgold
3 жыл бұрын
Ordered these for my 2021 f150 stx. Looks totally different underneath. Will these still work?
@FordBossMe
3 жыл бұрын
Pretty sure they will because it's still listed for a 2021
@TireShredder
2 жыл бұрын
Is there an insulating sticker you need to apply to the support rod?
@FordBossMe
2 жыл бұрын
Only what's in this video I showed all the spots where it goes
@FordBossMe
2 жыл бұрын
There was no insulating sticker on the supporting rod that goes to the bed side bottom
@peeblestim
3 жыл бұрын
a question on a purely none related topic, I'm trying to find out if - when I order and receive my 2021 Lariat supercab, will the graphic in the dash be a supercab or a crew cab? If you had any knowledge of this, I would appreciate it.
@FordBossMe
3 жыл бұрын
So I need some clarification on what you're talkin about here are you talking about when the radio pops up is it going to be a graphic of a super cab or a crew cab?
@FordBossMe
3 жыл бұрын
We have a couple inbound and when we get them if you remind me I can go run out and start one up and check for you
@FordBossMe
3 жыл бұрын
Next week we have one on the transit now that will be here and I'll go out and look but I need you to remind me maybe middle of next week
@FordBossMe
3 жыл бұрын
But I need more specifics on exactly what you're looking for very detailed
@peeblestim
3 жыл бұрын
@@FordBossMe in the center of the guage cluster is a graphic of an F150 crew cab that spins around as you select different drive modes, just curious if the supercab trucks will have a supercab ?
@ThomasMusic2010
2 жыл бұрын
I am putting generic mudflaps on my Ford Edge. I am attempting to determine how far I want the bottom of the mudflap from the road. Would you say those Ford ones are 4" from the ground? 2" ? I figure whatever height Ford decided would be good. Anyone know a good height from the bottom of the mudflap to the ground?
@FordBossMe
2 жыл бұрын
So the F-150s actually sit pretty high up you're not going to gauge it the same with the edge the F-150 they're like 12 in so you're going to have to go to like 6 to 8 with the edge
@addip
3 жыл бұрын
Hey so I have the 2021 F150 Lariat Super Crew 3.5 V6 and that ebay page says they won't fit, but they do fit a Super Crew V8 engine F150. Are they different in body style?
Thank you! I just ordered them and will let you know!
@mattprice443
3 жыл бұрын
I dont even have the plastic covering the inside of my wheel well
@FordBossMe
3 жыл бұрын
That's an add-on you got to pay extra money for it
@mattprice443
3 жыл бұрын
@@FordBossMe I suppose it's too inconvenient for them and dumb for me not to check
@jimh.412
4 ай бұрын
Thanks man. Those directions that come with these are dogsh*t.😂
@NoShadowOfDoubt1
3 жыл бұрын
$49 a piece at the dealer
@FordBossMe
3 жыл бұрын
I think eBay you can find them even cheaper
@NoShadowOfDoubt1
3 жыл бұрын
@@FordBossMe yes thanks to you ! Do you have a vid for the wheel wells or liners? I was surprised they said they have for the front also
@NoShadowOfDoubt1
3 жыл бұрын
I ordered the ones you linked in one of your replies, thanks again.
@FordBossMe
3 жыл бұрын
I don't think I have one for the rear liners but they are super easy they literally just pop right in and there's minimal installation and everything's right in front of your face like you can clearly see where everything's goes in the back but for the front I've never done fronts because they already have liners
@truckerclock1654
3 жыл бұрын
Would a set of wheel well guards get in the way of these? I want both for my truck.
@FordBossMe
3 жыл бұрын
No I don't think so they sit too far up inside the wheel well
Пікірлер: 125