I went one tooth down up front on my multistrada and hated it. Cost me a new chain to go back.... listened to everyone and on the forum that the bike should have come that way, couldn't stand it. Went back in under 1000 miles. Over $300 trial.. engineers have it right! Hope you like it....
@CaliMotoTV
2 жыл бұрын
We didn't like it on the streetfighter either. There's some bikes it works on, some it doesn't. We shall see.
@davidwill7248
7 ай бұрын
Thank you for the great video! Regarding the "finagling" to get the rear wheel back in, I remove the rear brake pads to make it easier. Yes, it takes 7 minutes to remove and replace brake pads, but wheel slides in much easier/faster (for me) and I don't have the frustration.
@davidwill7248
7 ай бұрын
IMPORTANT NOTE: If you take the pads out, be sure to put the pin back in through the calipers and put the clip back in the pin, otherwise it is possible for the calipers to slide apart and the top clips will fall out.
@motomcken5844
9 ай бұрын
Sorry,please give me for all Torque Specifications or can i fide them on web site? Thanks bro.
@gezkemp1263
2 жыл бұрын
I’d always slacken the front sprocket before I cut the chain just so can I use rear brake to hold it as it can be a strain on gearbox if done after the chain is cut
@CaliMotoTV
2 жыл бұрын
Yes good call!
@gezkemp1263
2 жыл бұрын
Watched your last chuckwalla video with the new quick shifter and new 360 views very interesting, I saw the odd shift the street fighter did on you and wondered as an experiment to see if it’s actually the shifter miss behaving or maybe a slight error of your foot or a gearbox issue you could mount a camera specifically at your left foot and ride a few sessions and go over the footage just for your own curiosity it may highlight the issue once and for all ! I’m not saying it will solve anything but may rule out obvious things , I have had my foot on my shifter unknowingly whilst trying to short shift and had bike kill as my foot hadn’t fully lifted of the shift pedal and I know u stated before you have a large foot it’s just a thought but overall live your videos at least you show warts and all not just say every single thing and product is awesome like some will to not offend the vendors etc which in my eyes is a total sell out , keep up the good work buddy it’s very much appreciated 👍
@kennethengstrom9261
2 жыл бұрын
Great vid Bill👍
@CaliMotoTV
2 жыл бұрын
👌 👌 👌
@hipposnakeyo
2 жыл бұрын
Damn this is going to be wild
@CaliMotoTV
2 жыл бұрын
Indeed! 🙌
@alanjoseph772
2 жыл бұрын
Hey Bill good content and thanks for the step by step instructions. If you don't mind, could you please explain the advantage of one gear down on the front sprocket? What do you gain by this? Why didn't this configuration work on the streetfighter V4S? Hope to hear back from you soon. Cheers!! Alan.
@CaliMotoTV
2 жыл бұрын
Going down in front or up in the rear will give your motorcycle more acceleration while reducing top speed. Opposite does the opposite. The gearing change made the streetfighter too torquey and riding on the freeway was leaving the bike at like 8k rpm (bit too high).
@46mtn
Жыл бұрын
The m chain is more wide than this one ? Or what is the difference between this 520 and the original one? 🙏🏽
@neilgouws6962
2 жыл бұрын
Fresh chain , sprockets and rear hoop .... Looks like you enjoy some track/circuit action? If you do... please show / give us some feedback on your new setup?!
@CaliMotoTV
2 жыл бұрын
Plenty of track content on the channel discussing the bike. Check it out
@MAZENBIRA
Жыл бұрын
I did not get the down one gear issue please explain more Changing the front chain mount would be major issue for the speed of bike start right
@parall4x
Жыл бұрын
hey Bill thanks for posting so much. did the speedometer change at all with this or does the bike read off the rear wheel…?
@Magicinstalls
2 жыл бұрын
Get yourself a tire wedge for that pitbull stand. You’ll have a much easier time lining up your axle
@CaliMotoTV
2 жыл бұрын
We have one now. Plot twist V2 you can't remove the front wheel because of the front fendor 😂🤣
@josey1972
2 жыл бұрын
Thanks for the product link! Using that website identifies the appropriate chain as a 525 instead of the 520 and I wondered why you choose the 520?
@marcosmarquez2926
4 ай бұрын
More mph and faster acceleration and lighter
@sarunassurvila7857
Жыл бұрын
You should have put a longer chain. 2 links longer. It would be easier to keep the front end down.
@indrekpuhm4229
2 жыл бұрын
Just curiosity in me is asking of any reasoning why you prefer Michelin tires over Pirelli?
@CaliMotoTV
2 жыл бұрын
Comes down to personal preference tbh.
@a1111an-dlion
Жыл бұрын
That locking ring on the front sprocket, I'm assuming it doesn't spin once you put It on. How did you line it up with the nut when you torqued the nut down to spec? I guess you just bend it where ever it lined up? I.e. no need to bend it where it was originally bent? Also, isn't the rear wheel nut supposed to be torqued to 125Nm?
@alexsevo6
12 сағат бұрын
were is bill ? Have not Sean him on the channel long time ???
@CaliMotoTV
11 сағат бұрын
Video back in January explaining everything.
@ArtasDesign
Жыл бұрын
Bmw manuals says that chain tension need to be on bike leg stand,what is your experience about that ?
@TeamSimpsonRacing
Жыл бұрын
Do you use loctite on the front sprocket nut?
@pedromartins4185
2 жыл бұрын
Nice 👍🏽
@CaliMotoTV
2 жыл бұрын
🙏🙏🙏
@Dabwell
2 жыл бұрын
Can you link that torque spec cheat sheet?
@CaliMotoTV
2 жыл бұрын
Email us at calimototv@gmail.com
@ducatifamfl5306
Жыл бұрын
Hey Bill, Happy Thanksgiving to you and Nikki! Quick question, I recently purchased rear sprocket titanium nutz for my 2022 S1000rr ... Can I leave the rear wheel on the bike and swap out the older nutz one at a time? (Nutz torque 70nm) Good or bad idea?
@nicholas9799
2 жыл бұрын
Any problems with the super lite sprocket? I just ordered one. But then seen a lot of post and them cracking
@CaliMotoTV
2 жыл бұрын
Nope, all good.
@tsm427
2 жыл бұрын
What happened to the SCproject exhaust? I see you have the stock can back on.
@michaelakachunk
2 жыл бұрын
Sore subject with the owner/director 😅😅
@CaliMotoTV
2 жыл бұрын
Yea don't care to represent that brand. Would rather run the stock can.
@mrste1250
2 жыл бұрын
Any plans for some light weight wheels bill ??
@CaliMotoTV
2 жыл бұрын
Possibly. We're liking the bike more and more so stay tuned.
@mrste1250
2 жыл бұрын
@@CaliMotoTV just picked one up from the dealers here in the uk, taking it over to the Isle of Man on Monday for the week to run it in 👊✊️✊️ mine has the m sport wheels 👍🏻
@obrienmills5713
2 жыл бұрын
No guard on the saw?? Make sure rpm on cutting wheel exceeds rpm on your tool! Be safe!
@CaliMotoTV
2 жыл бұрын
I like to live on the edge! Hahahah
@michaelakachunk
2 жыл бұрын
Go for the 16 tooth unit! if it doesn't feel right then you can chuck the OEM one on! cant say you haven't tried it then bud
@CaliMotoTV
2 жыл бұрын
Watch the whole video 😝
@michaelakachunk
2 жыл бұрын
@@CaliMotoTV currently still running haha 😄 just seen that you did fit it 👏
@vr46nh69bs11
2 жыл бұрын
Get yourself a Pitbull tire wedge. Might cut down the time putting the rear wheel back on.
@ssasquatchh3051
Жыл бұрын
Hi Bill Can you send me a copy of the cheat sheet (torque spec)
@ilpuntouk
2 жыл бұрын
does the 16 throw out the speedo much?
@CaliMotoTV
2 жыл бұрын
Not 100% yet... well see tomorrow
@BELANOVA74
2 жыл бұрын
What tyres are those dawg
@CaliMotoTV
2 жыл бұрын
Michelin power gp
@BELANOVA74
2 жыл бұрын
@@CaliMotoTV do they last for street ? Or should I get the power 5?
@MrMoto948
2 ай бұрын
Amateur. Always losen front sprocket nut 1st with chain on. Edited out the 10 attempts he had trying to loosen the nut. Loosen rear sprocket nuts while rear wheel is still on bike.
@josesantana983
2 жыл бұрын
I don't think you using safety first for your audience, very dangerous procedure teach the proper way.
@CaliMotoTV
2 жыл бұрын
🤔
@teddyo6205
2 жыл бұрын
I think you're safe bill.
@steelsporty
Жыл бұрын
"I can't urge you enough to be super super careful when cutting" he says, using a cutting disc on a mini grinder with no guard fitted and no side handle. 😬
Пікірлер: 66