Those 4 bolts with the loctite that held on your old fender fit perfectly into the holes that your front reflector mounts are screwed into. You can take those long protruding mounts out and the reflectors off the forks and screw 2 of those in their place, and it’s perfect for a cleaner look.
@kylelarsen472
2 жыл бұрын
Thank you!
@jeffcramer9567
2 жыл бұрын
Thanks for great install video. Helped with my install.
@gomez12121212
2 жыл бұрын
Sweet video brother safe riding my man!
@LeBoosLeisure
2 жыл бұрын
Love the bike man! I was thinking about getting the Kawasaki green one but I’m now sold on this color! Question, what does the side graphic say? It looks like numbers but I can’t tell
@kylelarsen472
2 жыл бұрын
It doesn’t really “say” anything more of a design as far as I’m aware
@jessicalynn3885
2 жыл бұрын
This looks so good! I don't really trust myself with tinkering... is it a bad idea to try and find a mechanic to do this on my bike for me?
@kylelarsen472
2 жыл бұрын
This is a project that takes minimal tools, and can definitely be done by anyone with any level of mechanical experience. I would definitely challenge you to take some time on a day off and try to tackle it yourself. Additionally it may just give yourself some courage for future projects!
@djoninja
Жыл бұрын
Help… just bought a 2020 and doing this now, when you unplugged the wires, mine has 3 plugs blue, black, and a smaller black on very top which I cannot unplug! Idkwtf
@frostbyte479
2 жыл бұрын
which kit is this? i just bought my bike last week and was thinking of doing the same thing?
@kylelarsen472
2 жыл бұрын
This is the graves kit from revzilla, but other installs will be almost identical
@kanhaigupta5128
2 жыл бұрын
Keep making videos on this machine, what about stealth mirror on this
@kylelarsen472
2 жыл бұрын
Stealth looks awesome! They make them for the 636
@cancer_is_doc3945
2 жыл бұрын
i sub 🙃🙃
@Emmgradesign
2 жыл бұрын
Where did you buy the new one?
@nas8807
2 жыл бұрын
How did you get the turn signals off the old fender?
@elokindesign
Жыл бұрын
Remove the reflectors first and that will open the old fender into two pieces. From there, you have to unscrew the plate holding the turn signals to the fender. You will then have to push the rubber part holding the taillight out of the old fender and into the new one. It's attached to the taillight. It's kind of hard to push it out and then push it into the new eliminator, but it does fit! Don't forget to remove the license plate light as well and attach it. There are two rubber gromits that come off and will attached to the fender eliminator.
@noelcontreras11
Жыл бұрын
What’s the adapter for? Wouldn’t you use the old cord for the turn signals?
@kylelarsen472
Жыл бұрын
I believe the wire is for the license plate light
@waiatm
2 жыл бұрын
I bought the same kit from RevZilla and it didn't come with any wires? I didn't see where you used them?
@kylelarsen472
2 жыл бұрын
I would contact them because you were most definitely supposed to get a wire that taps into the connector and a open wire on the opposite side
@waiatm
2 жыл бұрын
@@kylelarsen472 thanks for the reply. I was hoping to put it on today (same bike) and was disappointed. I guess you NEED that other package eh? Thanks for the video. Not a 25 minute one like others for a simple job. I like to run through a video because I'm the type that gets into something and I'll see a video later that says "don't take off that fastener or it'll be...." And I'm like shit!
@waiatm
2 жыл бұрын
@@kylelarsen472 that's bizarre. I called graves them and looked up the parts list and it's not a part of the kit? Mine is a 2022 but I didn't imagine it would be different. I'm going to try to put it on and see what happens
@kylelarsen472
2 жыл бұрын
@@waiatm Very bizarre, I know I had a crimp two wires or maybe three trying to think back but good luck!
@AmericanSmallArms
Жыл бұрын
Where did you need the wires? If anything, wouldn't there just be excess stock wiring since you are bringing the lights closer to the bike? Is removing the left side piece really necessary?
@westars0823
2 жыл бұрын
Brand new 2020? Jk I know what you meant. I bought the same exact bike 4 weeks ago. I have about 485 miles on it.
@kylelarsen472
2 жыл бұрын
Lmao didn’t even realize I said that
@djoninja
Жыл бұрын
Wow you skipped quite a few steps of this process. Not doggin you and I appreciate the helpful content, just pointing that out in case anyone else thinks that it’s not going be a little more involved.
@XJENERAL
Жыл бұрын
TST industries has the Best Eliminator hands down with their Adjustable license plate holder and Integrated tail lights ❤
Пікірлер: 29