a few questions, why not use a bit of the new oil to coat the top of the new filter? Why the old oil? If we can just do hand tight for puting on the filter, why do we need to take it off with a wrench? would hands not work? Also, where could we get those nylon washers? And is there different sizes to worry about? ( I have the same bike as you, year as wel)
@michaelbert9728
Ай бұрын
Dose this exhaust not have a spot for the O2 thought I just seen it hanging there
@chaseh504
3 ай бұрын
Does this require a tune?
@Jamal003
3 ай бұрын
would a 650 2022 exhaust system fit a newer model (650 - 2023)?
@Bee-fr7zk
3 ай бұрын
Wish this worked on mine
@greasytriple2497
4 ай бұрын
I just tried this stuff. No luck. Coating it with brake fluid next.
@Kingmtm1992
4 ай бұрын
Well, howd the brake fluid go?!
@greasytriple2497
4 ай бұрын
Worked great and finished off with brake cleaner on paper towels. @@Kingmtm1992
@jakubwodarczyk2359
5 ай бұрын
What's the oil filer part number?
@garyboyce6186
5 ай бұрын
I think you only need to take lower fairings off close to manifolds from other videos I watched. Also the long bolt can be accessed easily removing the shifter lever and a long extension
@johnnovak9982
5 ай бұрын
I know I can’t stand when they paint the plastic silly but I will be checking into that. I got a 78 Suzuki DS 80 that they spray-painted white original color is orange.
@misthiostv5671
7 ай бұрын
During changing oil of ninja 650, did you reset anything at the panel board or dashboard?
@kylelarsen472
7 ай бұрын
I believe so, I sold the bike some time ago but I think I just turned the oil light off press enter then turn it on again to reset it
@nickmurray3442
8 ай бұрын
Can you post a link to get to that specific one? I got a 2022 ninja 650ex and love the way this one sounds out of all the ones ive watched videos on.
How many kilometer before changing the engine oil sir?
@orionviens9830
11 ай бұрын
Guy before me sprayed a textured black paint on the plastics...almost like a very lightly textured rhino guard paint. Collects dirt like nothing else, can't possibly keep it clean. I'm going to be purchasing new black plastics all the way around but the gas tank is an issue. Paint is already wearing off where my knees rub on it, but I was trying to sort out how to remove the paint from the rest of the tank. I might try this method and see if it works. I really eventually would like to replace the tank with black plastic tank but it isn't cheap, especially hard to justify for just an aesthetic.
@kylelarsen472
11 ай бұрын
This one was a lot of work but I’ve seen good results with paint stripper, i didn’t go that route because I was concerned about the integrity of the plastic. If you do try it, do it on a area that won’t completely ruin the tank just in case it does and of course good luck
@JCproduction0
5 ай бұрын
Try a wrap
@orionviens9830
5 ай бұрын
@@JCproduction0 I really think this is the right answer. Going to look into this
@madarchermoto4955
Жыл бұрын
How much oil did you use? I used like 1.95 quarts lol…. Almost 2 with a little splash left at the bottom of the second quart… Is that about what you used as well???
@lezrod4995
Жыл бұрын
how did you get the bike on that bike stand? Did you need to install anything on the rear ?
@kylelarsen472
Жыл бұрын
Yeah you need frame sliders
@alansmithblackett5786
Жыл бұрын
Sounds like yamaha m1
@Petrolheadz1
Жыл бұрын
Hope you got a tune as well
@KillaSnow
Жыл бұрын
Just actually got a 2023 650 and coming in today. What phone mount do you use as I've seen there isn't much space on the bar.
@kylelarsen472
Жыл бұрын
Got rid of it but I finished off with a quadlock and a attachment that attaches to the steering stem bolt
@XJENERAL
Жыл бұрын
TST industries has the Best Eliminator hands down with their Adjustable license plate holder and Integrated tail lights ❤
@djoninja
Жыл бұрын
Wow you skipped quite a few steps of this process. Not doggin you and I appreciate the helpful content, just pointing that out in case anyone else thinks that it’s not going be a little more involved.
@djoninja
Жыл бұрын
Help… just bought a 2020 and doing this now, when you unplugged the wires, mine has 3 plugs blue, black, and a smaller black on very top which I cannot unplug! Idkwtf
@XJENERAL
Жыл бұрын
If you haven’t already I’d say to have your ECU flashed MooreMafia will get you right. Delete 02 sensor, Install graves Block off plate and enjoy!
@noelcontreras11
Жыл бұрын
What’s the adapter for? Wouldn’t you use the old cord for the turn signals?
@kylelarsen472
Жыл бұрын
I believe the wire is for the license plate light
@garethmcnally5349
Жыл бұрын
Good one..now the cops can hear you coming a mile away..all for what..1hp...stock sounds far better
@ricchicortes
Жыл бұрын
QUE TIPO DE ACEITE LE CAMBIASTE?
@True.blue.250f
Жыл бұрын
I bought a ttr-230 not long ago in mint condition the only problem was that the previous owners spray painted over the old blue with a different shade of blue
@alexisjvids
Жыл бұрын
Did you ever change the front sprocket?
@kylelarsen472
Жыл бұрын
Yeah, it didn’t seem like a big difference. Only thing I really notice was the high rpm’s on the highway and the cluster of lights that came up on the display
@alexisjvids
Жыл бұрын
@@kylelarsen472 what sprocket size did you use ?
@kylelarsen472
Жыл бұрын
@@alexisjvids 13t
@alexisjvids
Жыл бұрын
I just installed a 14t and it did the same thing, check engine light on and gears im in won’t show on the display.
@kylelarsen472
Жыл бұрын
@@alexisjvids if you go onto the forms, you can hardwire it in some way or another, but it just seemed like it wasn’t worth it in the end for me
@Juan-pp4oy
Жыл бұрын
Sounds great 👍
@shashankdeshwal7463
Жыл бұрын
where are you from brother
@AlbaBGud
Жыл бұрын
Alguien me pasa el dato para comprar el carenado izquierdo .un sitio online .gracias.
@everss02
Жыл бұрын
don't tune it, get the ecu flashed, much more than af needs to fixed, check a moore mafia vid
@mavricxx
Жыл бұрын
Wish you would of done a cold start and shown the finished product after install bro. I wanted to see how it looked after install.
@kenyaschwarz6072
Жыл бұрын
the sound is amazing
@KpopNiDontStop
Жыл бұрын
I feel like this colorway makes this bike stand out even against the liter bikes on kawasaki's line up.
@lacrauzorro
Жыл бұрын
Awesome sound on an awesome bike!
@stefanoalcamo5456
Жыл бұрын
Was the db killer in?
@andrymathew3235
Жыл бұрын
Hi where do i order the exhaust system?
@kylelarsen472
Жыл бұрын
I purchased mine through revzilla
@Tupac96G
Жыл бұрын
I'm a new subscriber to the channel! If it wasn't too much to ask, could you make a video disassembling her fairings?
@kylelarsen472
Жыл бұрын
I live up north so my bike is currently in storage for the winter season id have to look through some footage to see if I have some clips
@jcacordova
Жыл бұрын
Better sound has the zx250r
@ethanl8566
Жыл бұрын
Did you end up installing a tune? And if so, did you take it somewhere to have it installed and was it worth it?
@kylelarsen472
Жыл бұрын
I did have a tune installed, I have a dyno jet power commander it in but the video would’ve been a disservice to the channel. It’s not worth it in my opinion. No noticeable power gains
@ethanl8566
Жыл бұрын
@@kylelarsen472 Did the bike feel sluggish though after the exhaust? Or have any noticeable performance loss?
@kylelarsen472
Жыл бұрын
@@ethanl8566 no it “felt faster” but Probaly only because I sound faster giving the illusion
@kylelarsen472
Жыл бұрын
@No_Name not completely, just depends how much you value the dollar. In addition there are flashes that are much cheaper and easier to install that I would suggest instead if you’re able to.
@kylelarsen472
Жыл бұрын
@No_Name that’s what I took into consideration when installing the tune, and that’s why I install tune.
@nas8807
Жыл бұрын
How did you get the turn signals off the old fender?
@elokindesign
Жыл бұрын
Remove the reflectors first and that will open the old fender into two pieces. From there, you have to unscrew the plate holding the turn signals to the fender. You will then have to push the rubber part holding the taillight out of the old fender and into the new one. It's attached to the taillight. It's kind of hard to push it out and then push it into the new eliminator, but it does fit! Don't forget to remove the license plate light as well and attach it. There are two rubber gromits that come off and will attached to the fender eliminator.
@kunaldutta3411
Жыл бұрын
Good job mam
@ericcruz7836
Жыл бұрын
Nice bike! Got myself into the same bike year 2022 650 krt edition. Love the scheme on these models as well. Great bike overall. Waiting on two brothers exhaust to ship out.
@kylelarsen472
Жыл бұрын
Nice! Exhaust makes the bike much more enjoyable to ride
@madarchermoto4955
Жыл бұрын
On the plastic clips you popped out on the front of the fairings, do you just stick the flathead under the outside and pry out? Or do you have to press the center of it like a button and then pry out?
@kylelarsen472
Жыл бұрын
For plastic clip facing forwards, you can use either a flat head or a pick to pull it out then remove the retainer. For the one facing down, I just use the back of a screwdriver and press from the inside out.
@omiddanish1295
Жыл бұрын
Thank you
@9a1koo63
Жыл бұрын
Big fan now
@thisisamasingh17
Жыл бұрын
Awesome videos man! Keep them coming. Not many 2022 Ninja 650 Mod videos out. I have the same exact bike and want to get an exhaust as well.
@madarchermoto4955
Жыл бұрын
I still don’t know why Kawasaki thought it would be a good idea to make the stock exhaust all one welded piece on the new 650’s. No slip ons for the 650 bros. It’s crap!
@kylelarsen472
Жыл бұрын
Yeah it’s a strange way to do things, but if you really wanted to you could just cut the pipe right before the muffler and slip on could go over top of that pipe
@waiatm
Жыл бұрын
I bought the same kit from RevZilla and it didn't come with any wires? I didn't see where you used them?
@kylelarsen472
Жыл бұрын
I would contact them because you were most definitely supposed to get a wire that taps into the connector and a open wire on the opposite side
@waiatm
Жыл бұрын
@@kylelarsen472 thanks for the reply. I was hoping to put it on today (same bike) and was disappointed. I guess you NEED that other package eh? Thanks for the video. Not a 25 minute one like others for a simple job. I like to run through a video because I'm the type that gets into something and I'll see a video later that says "don't take off that fastener or it'll be...." And I'm like shit!
@waiatm
Жыл бұрын
@@kylelarsen472 that's bizarre. I called graves them and looked up the parts list and it's not a part of the kit? Mine is a 2022 but I didn't imagine it would be different. I'm going to try to put it on and see what happens
@kylelarsen472
Жыл бұрын
@@waiatm Very bizarre, I know I had a crimp two wires or maybe three trying to think back but good luck!
@AmericanSmallArms
Жыл бұрын
Where did you need the wires? If anything, wouldn't there just be excess stock wiring since you are bringing the lights closer to the bike? Is removing the left side piece really necessary?
Пікірлер