Astra 2A,2B 28°East Scan | Multi TV | KU Band | Channel List | Master Decoder
Here's a simple guide to scanning Astra 2A/2B at 28° East for Multi TV channels on KU Band using a master decoder:
1. *Turn on your TV and Decoder:*
- Ensure your TV and decoder are properly connected and powered on.
2. *Navigate to the Installation Menu:*
- Using your remote, go to the Menu.
- Find the “Installation” or “Setup” option.
3. *Select Satellite and LNB Settings:*
- Choose “Satellite Setup” or “Antenna Setup”.
- Select Astra 2A/2B at 28° East.
- Set the LNB type to “Universal” or enter the frequency (typically 9750/10600 MHz).
4. *Scan for Channels:*
- Choose “Blind Scan” or “Auto Scan” to automatically search for all available channels.
- Wait for the scan to complete. This may take a few minutes.
5. *Save the Channels:*
- Once the scan is complete, save the found channels.
- Exit the menu.
6. *Check the Channel List:*
- Go to your channel list to verify the newly added channels.
7. *Adjust Settings if Necessary:*
- If some channels are missing or not working, you might need to adjust the dish alignment slightly or repeat the scan.
If you encounter any issues, consult your decoder’s manual or customer support for specific troubleshooting steps. Enjoy your Multi TV channels!
Here's a step-by-step guide to scanning Multi TV channels on a master decoder:
1. *Power On:*
- Turn on your TV and master decoder.
2. *Access the Menu:*
- Using your remote control, press the "Menu" button to access the main menu of the decoder.
3. *Navigate to Installation Settings:*
- Use the arrow keys to navigate to the "Installation" or "Setup" option and press "OK."
4. *Select Satellite:*
- In the installation menu, select "Satellite Setup" or "Antenna Setup."
- Choose the satellite corresponding to Multi TV. For Multi TV, you will generally select Astra 2A/2B at 28.2° East.
5. *Configure LNB Settings:*
- Set the LNB type to “Universal” or input the correct frequency values (typically 9750/10600 MHz).
6. *Choose Scan Type:*
- Select "Blind Scan" or "Auto Scan." A blind scan will search for all available frequencies and channels.
7. *Start Scanning:*
- Begin the scanning process by pressing "OK." The decoder will search for all available channels on the selected satellite.
- This process may take a few minutes. Be patient as the decoder identifies and lists available channels.
8. *Save Channels:*
- Once the scan is complete, the decoder will display the number of channels found.
- Save the scanned channels by following the on-screen prompts.
9. *Exit the Menu:*
- Exit the installation menu and return to the main screen.
10. *Verify Channels:*
- Check your channel list to ensure that the Multi TV channels are now available.
11. *Fine-Tune if Necessary:*
- If some channels are missing or have poor signal quality, you might need to adjust the dish alignment slightly or repeat the scanning process.
Additional Tips:
- *Signal Strength:* Ensure that the dish is properly aligned and that there is a clear line of sight to the satellite.
- *Firmware Updates:* Make sure your decoder has the latest firmware update to ensure compatibility and optimal performance.
- *Technical Support:* If you encounter persistent issues, consult the user manual of your decoder or contact customer support for further assistance.
Enjoy watching your Multi TV channels!
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #multitv #installation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire
Негізгі бет 💎 𝐀𝐬𝐭𝐫𝐚 𝟐𝐀,𝟐𝐁 28°East Scan | Multi TV | KU Band | Channel List | Master Decoder
No video
Пікірлер: 3