Just superb work! Absolutely beautiful! I was waiting on this one. The Rustoleum by itself looks amazing but adding clear just took it up to another level. Be blessed my friend.
@JamesDguy
Жыл бұрын
Thank you and your right! 100% on another level now. God bless you!
@eeiko321
Жыл бұрын
That’s awesome how you showcased this. Saving thousands of dollars for people who would’ve thought it be impossible
@sbouaphaphan
Жыл бұрын
Thanks for posting this video. It answered a question i had about putting 2k clear on rustoleum enamel paint. Im actually currently doing a rustoleum turbo can paint job flat black. Im going to put Speedokote 2k clear SMR-1150 on top with pearl in it. This makes me more confident with my decision to go this route. Lets hope for some great results! 😁😁
@speedokoterefinishnetwork4937
Жыл бұрын
Dude you absolutely killed it 😇😇😇😇
@JamesDguy
Жыл бұрын
Thank you! I still wanna wet sand and do some flow coats with speedokote once we move
@speedokoterefinishnetwork4937
Жыл бұрын
Yea sand her down with 2000 grit real nice and then throw on a few more coats of smr1150 and it will keep looking nicer and nicer the more coats of clear you do
@MrGotenz21
Жыл бұрын
Are you planning on wetsanding the clear to remove the orange peel? I REALLY want to see just how good this can get!
@garyny4073
Жыл бұрын
@@speedokoterefinishnetwork4937 what point does it end though ?
@speedokoterefinishnetwork4937
Жыл бұрын
@@garyny4073 I've herd of some shops flow coating a car 2-4 times until it's close to perfect. 3-4 coats and blocksand, another 3-4 coats block sand again ect ect
@RMH857
Жыл бұрын
Awesome work Guys. Dang, if my rear quarters weren't bad on my 05 Mazda 6, I'd probably go the same route. Great job!
@chuckzamzow9
Жыл бұрын
I have used that 2k glamour clear on my trim piece s on my Honda great product, spraymaxx is the product👌
@blainebailey5641
Жыл бұрын
Do you have to run some of these paints top to bottom? Good work man these all look really good Keep making good content bro
@midochan4830
11 күн бұрын
Bro what number sand paper you sand it after painting ?
@codyjarrett9685
6 ай бұрын
love your Irish tattoo
@RealMTBAddict
Жыл бұрын
Nice. I just need to do my hood.
@crazyjosha5871
Жыл бұрын
What kinda respirator do you use when painting 2k and the rustoleum paint?
@mrbeastchocolate
Жыл бұрын
Something that is rated for organic vapors. I like the 6006 cartridges for a 3m mask.
@levelgx
Жыл бұрын
Hey, did you ever mention putting 2k in the freezer to extend its life? How much longer ?
@nothanks81
Жыл бұрын
How long is the clear holding up for you, noticed you've been using it awhile now.
@TerrellWillams
7 ай бұрын
Nice!
@psychotrading
10 ай бұрын
awesome saw the john 3:16 bold christian i love it
@blessednech
6 ай бұрын
Where did you buy the clear coat ?
@_Common_Logic_
4 ай бұрын
It might help to watch the video or at least read the description before asking basic questions.
@etrankill3r14
Жыл бұрын
debadge and sideskirts
@ChrisPBacon198
Жыл бұрын
That's impressive Dude 🙂
@khazoury
Жыл бұрын
😱
@Nperez1986
Жыл бұрын
For the matter of your health and safety PLEASE put on a painter's suit...your skin sucks in more than you think. It's how our Gas Handlers in the military die from skin contact with fuels. Your health is fore sure worth way more than $100-$200. God Bless! (
@i11u5ion9
Жыл бұрын
Agreed. Its not just about a mask. Even your eyes will absorb the fumes. Plus on the flip side a nice clean suit will help the nibs and dirt from getting on the finish. Just something about clear coat it likes to pull the dirt.
@DaSesh
Жыл бұрын
so you cut and buffed this paint job in a previous video and now laid 2k clear on top.. was this done after the buffing and wash or just after the buffing? sorry at work and they hate that we use our phones so can only really watch and listen during my 15 min b reak thanks! god bless
@JamesDguy
Жыл бұрын
I didn’t cut and buff it in previous video I just buffed it and in this video I wet sanded and added another color coat then let it dry then wet sanded it again and added clear. I make sure to wipe the car down with wax and grease remover or rubbing alcohol to get rid of any wax from buffing. Hope that helps
@DaSesh
Жыл бұрын
@@JamesDguy thank you! For the clarification
@danielembry5157
Жыл бұрын
You do great work and I appreciate you posting your progress. Thanks to you I resprayed my hood for my 06 Toyota Solara and used the 2K clear over it. It needs another wet sand and buff but all my friends and family say it looks professional. I'm not so sure about that (lol), but not bad for in my carport out of direct sunlight. I hope it holds up over time. Keep spraying brother!
@JamesDguy
Жыл бұрын
Thank you and that’s awesome it’s nice to see others getting good results!!
@EDZEN94
Жыл бұрын
love your work, been watching for a long time & still haven't mustered the courage to DiY my integra, (also paint cost more here in Australia).
@JamesDguy
Жыл бұрын
Yea I have heard they haven’t been good to y’all there on spray paint prices. I’ll be doing my brothers integra soon as well. Maybe that will get you motivated. Either way hope you find a way to get the paint cheaper.
@sinformant
Жыл бұрын
I still think you should buy some chopped carbon and try your hand at skinning the stock hood. It'd probably be the very first ep3 with a forged carbon hood and would make for some great content to draw in more subs and views. Maybe even cut some vents in it as well
@JamesDguy
Жыл бұрын
Ha you over estimate my abilities man. Appreciate that lol
@sinformant
Жыл бұрын
@@JamesDguy nah you underestimate them.
@BEubankbuilt
Жыл бұрын
Looks good! How come u don't use a sanding block how wavey does it look by sanding with your bare hand?
@JamesDguy
Жыл бұрын
I did use a sanding block a lot in the video but hard to see in some of them. It’s a foam sanding block and it didn’t work as good as hand sanding and wasn’t wavy. I definitely block sand when doing bondo or flattening. I have used it both ways but prefer doing it by hand on curve surfaces but the roof ended up getting block for the final pass. Didn’t wanna make it too boring so I just speed most of it up. I could have made it far more detailed but I’ll answer as many questions as I can to make up for it.
@Ravenguyeneiluj
Жыл бұрын
Nhot bhed, curious how many cans of 2k you used?
@JamesDguy
Жыл бұрын
Mentioned right at the beginning
@TheIzzo
Жыл бұрын
nice, I'd be interested in chrome powder coating or replacing chrome on chrome wheels
@franchise-pj6ow
Жыл бұрын
Great Job brotha ! You obviously had the car prepped to perfection prior to spraying it ! JESUS IS LORD !
@DentZero123
Ай бұрын
I must say I’ve been painting cars for a while. You just turned a spray can job into a professional job adding a 2K clear looks amazing. Always use that clear. It looks fantastic. Looks like a professional job outstanding.
@adrianfrankowski138
Жыл бұрын
I'm very sad, that this type of RustOleum isn't available in Europe :(
@JamesDguy
Жыл бұрын
That is terrible and #rustoleum needs to fix it!
@adrianfrankowski138
Жыл бұрын
@@JamesDguy Indeed 😀
@leonidaskalivas4562
Жыл бұрын
Try montana or flame spray its cheaper and available in Europe its also easier in application
@robsmithracing
Жыл бұрын
@@leonidaskalivas4562I use Montana her in the uk
@optimoprimo132
11 ай бұрын
Rustoleum might be there under a different affiliate name. As far as base coat goes you might try duplicolor. I bought duplicolor's fleet enamel to paint my truck. I feel duplicolor has a better spray tip and atomizes better than rustoleum. Also I believe the best 2K clearcoats in spray can come from europe if I am not mistaken. I was going to go with the spray max 2k clear but I saw the Car-Rep 2k clear which has indefinite shelf life. The spray max needs to be used right away and has a very very short to no shelf life. In case you want to do separate parts at different times or a mistake happens you need to sand or fix before continuing.
@Show-TimeJ
Жыл бұрын
Praise Brother, The car looks amazing. Keep up the good work!!!
@JamesDguy
Жыл бұрын
Thank you 🙏🏻 God bless you
@mre912
Жыл бұрын
Bro, that came out so clean. Wet sand and buff and it'll look like a professional spray gun job. Blessings from Colorado 🤙
@JamesDguy
Жыл бұрын
Thanks and I linked a video of me doing that to my wife’s crv in the description but your 100% right! Thanks again for the love! God bless!
@chris01479
Жыл бұрын
Awesome work. I have got questions. Can I make great finish using with raffle can if I use it inside the spray booth?
@JamesDguy
Жыл бұрын
Yes absolutely!
@Wilkwayadventures
Жыл бұрын
Looks awesome! I'm about to do the same process on my Prius, which has been spraypainted a few different colors. I'd LOVE to see you do a full car with the Colorshift, mostly because I'm very curious how many cans it would take!
@JamesDguy
Жыл бұрын
That would be very expensive but would be awesome if it worked out well because i have seen it done panel by panel and looks amazing but it takes like 2-3 cans per panel depending on size. You need black base coat, then the color shirt a few coats at least then the 2K clear over it.
@Wilkwayadventures
Жыл бұрын
@@JamesDguy it seems like it’s going away, or at least wal mart no longer lists it as available.
@nikkimonson1970
Жыл бұрын
you killed it for NOW but I want to see what it looks like in six months and then we'll talk
@zfiddy
Жыл бұрын
Rustoleom is $18 a can, and that 2k clear is $55 a can! We get ripped hard in Australia.
@eddiearre
Жыл бұрын
Damn, I get that for like 5-6$ a can here where I'm at , u guys definitely getting taxed up the a$$
@JamesDguy
Жыл бұрын
That’s just plain stupid! I’m sorry to hear this :(
@darnelleoutlaw3490
6 ай бұрын
Insane. It's starting to become more and more expensive here in the u s also
@dannydirt5D
6 ай бұрын
2k clear coat in the UK is £26.60 per can 😢
@leandrocosta3158
4 ай бұрын
Aqui no Brasil uma lata custa 118 reais,
@kevindevlin5091
Жыл бұрын
Looks really great man, amazing job.I was also a dick in a previous comment in another one of your videos so i want to sincerely apolgize for that. Car looks awesome. Keep up the great work brother!!
@LTT.Official
Жыл бұрын
Same exact thing I did waaaayyyy back when I started following you, 5k subs I think. I just used Sikkens clear in a cheap harbor freight gun. Still on the car all these years later.
@JamesDguy
Жыл бұрын
That’s awesome! I wish I could use my gun but neighbors love to call me in and they didn’t hear the spray cans lol the compressor is a different story all together lol that bad boy wakes the dead
@LTT.Official
Жыл бұрын
@@JamesDguy Check out the California Air Tools 8010, thats the one I have, the thing barely makes any noise.
@historyhunter5215
Жыл бұрын
Ok, I'm writing Rusto'.... This color needs a new name... #MooreMint better yet 😂😂😂😂 #THCGreen!
@GlassWerx
Жыл бұрын
Car looks great. The color of aj engine bay is color I was thinking about redoing my car in. I saw it in his video before it looks hella good
@JamesDguy
Жыл бұрын
Thanks and yea his bay is 🔥
@GlassWerx
Жыл бұрын
@@JamesDguy yeah I was really thinking bout repainting my car n that color. But haven't been able to find it locally
@jamesallen7093
11 ай бұрын
Iif you guys are gonna paint with rust - oleum get the 4 x turbo ! Has a 10" spray pattern , did my Chevy S - 10 with just 3 cans !
@juliojreyes6234
Жыл бұрын
Love these videos buddy. Many blessings to you
@JamesDguy
Жыл бұрын
Thank you 🙏🏻 God bless!
@roderickdewberry9753
Жыл бұрын
Looks great!! You definitely got some real talent. Your vids are always great!
@JamesDguy
Жыл бұрын
Thank you 🙏🏻 All God given and all Glory to HIM!
@josephlanger3768
3 ай бұрын
Just found you. Working through some of your videos. I'm really impressed that you are giving people a legitimate alternative to $5000.00 paint jobs. I have been thinking about this myself for quite a while. Paint is paint. If you can spray it on, and you have decent technique, you can get some very impressive results. Obviously a $12.00 can of paint will probably fade or chalk up in a couple of years, but I think you solved this by top coating with the 2K clear. Other than your time, you probably have $100.00 to $150.00 invested in your paint job, and the results speak for themselves. Your car looks great! Good enough for 95% of people! Would love some follow up to see how it holds up in a couple of years. Great job and keep posting!
@Vortec.Z32
Жыл бұрын
I've watched alot of the vids man love it, but I believe this to be the only one where u explain letting the paint aka bade coat cure a few days then wet sand 1k lightly then apply 2k clear. All the other vids I've seen you just directly add 2k on top after base no waiting? Is this somthing new you've learned to be a better overall outcome? And when your done wet sanding do u use wax grease remover or just wipe down with dry rag?
@carrier19781
Жыл бұрын
LOVE YOUR CONTENT!! I'm currently about to paint my small suv grabber green and decided to pull the trigger seeing how good you make your cars look.
@JamesDguy
Жыл бұрын
Awesome!! I love grabber green! I have done so many vehicles that color and with a 2K clear over the top it would be even better! I pray it all works out in your favor! God bless you!
@FR11
Жыл бұрын
#RattleCanLikeDGuy
@JamesDguy
Жыл бұрын
Right! ❤️
@FR11
Жыл бұрын
@@JamesDguy 🍻🍻🍻
@johnmcconnell6294
Жыл бұрын
You've inspired me to do this on a few cars that I have. Great job man!
@tonylashmit2613
Жыл бұрын
Best rattle can paint job I've ever seen!
@i11u5ion9
Жыл бұрын
That's a really good job for rattle can. I paint cars professionally and started out with the spray cans back in the day. A lot of work for sure, but keep at it there are a lot of tricks to knock down the labor and time for the same finish. I like to say I work hard till I get smart ;)
@ChrisPBacon198
Жыл бұрын
Whats The Lifespan of This Paint ? And Durability Like
@shiftwrenchrepeat
Жыл бұрын
Looks great man! Learned of the 2k years ago because of you!
@JamesDguy
Жыл бұрын
I’ll be honest I don’t remember where I learned or it from but glad I have it now!
@StephenBrewer89
Ай бұрын
God bless buddy! What fog lights are those? Amazon? I need some yellow glass ones for my FA5. Looks good
@optimoprimo132
11 ай бұрын
You did an amazing job! God Bless you! Your body work and painting through all the stages can be a spiritual meditation. Sometimes God in making us perfect as our Heavenly Father is perfect depending on how many bad life habits we have formed through sin needs to take us through various stages of disposition. He breaks our pride and sinful tendencies in order to give us a new foundation.(derusting tools, hammers, air needles, cutting out rust, hammer forming new panels, butt welding, grinding, fiber glass bidy fill, seam sealer, regular bondo) That is the most painful part of the process as we have to learn to trust the process, humble ourselves and let go of the old and accept the new. Then He can start on the refinement of virtue. (Sanding body fill, filling in pinholes, taping, primer, sanding, base coat, sanding, clearcoat, buffing and polishing)! And if you put in the time and good will or dispositions just as the car comes out stunning so we will come out of the process shining like the stars of heaven and become a light on a mountain for all to benefit! Excellent work!
@kortam6065
3 ай бұрын
Love that you add YESHUA✝️☝️ Godbless you brother
@zacksrandomprojects9698
Жыл бұрын
Ive been watching you for years now and everytime you paint something I can definitely see you've gotten better and better. Looks amazing. 🍻
@JamesDguy
Жыл бұрын
Thank you 🙏🏻
@M5JamesE39
Жыл бұрын
I f'd up and need your help 😢 Had three beautiful coats on the car using a rattle can last night but ran outta time to do the clear. Left it outside all day today in the sunlight to cure. Came home late this evening and wanted to get the clear on so I rescuffed it with dry 800, wiped with IPA, followed by glass cleaner and lastly a tack rag before I threw on a light coat again...and it's f'ing wrinkling randomly, which looks similar to what happens to paint after aircraft stripper is applied :/ At this point I'm skipping the clear until I can resolve this but I don't know how-to fix this or prevent it again when I do. Wait a week, a month and then try again? Please help!!!
@NG-cf7zh
Жыл бұрын
You waited too long to clear coat, either clear coat after 30 minutes or wait 2-3 days. You can’t fix the wrinkles, unfortunately.
@M5JamesE39
Жыл бұрын
I meant to, got on the last cost of color and then got rushed out the door for a surprise birthday party. I figured sitting outside in the sun for the day would be enough but it wasn't. Now it's been in the sun for a week, I'm busy this weekend, so if it fucks up next weekend, then just know a 3rd gen Prelude w/ an H22A swap will be burning to it's death lol.
@wolfmode0061
Жыл бұрын
@@M5JamesE39wrinkles can very easily be sanded off and re-sparayed once dried. Maybe the cleaning products didn't fully flash before you painted. Glass cleaner does seem a bit much as well. Harsh chemicals will give off toxic fumes that interact negatively with paint.
@_Common_Logic_
4 ай бұрын
I'm sure you've figured it out by now, but to others going the same route; you've obviously got a TON of time and effort into the car by the time you've finished prepping and painting. It's about the least "fun" thing in the world by the time you are finished with an entire car... Don't mess it up by rubbing "glass cleaner" (whichever variation of ingredients may be tossed into your specific brand) into your fresh paint before trying to topcoat. You're only using a tiny bit of product for this stage, and they sell the right juice for the job... If you choose to find an "alternate" wax/grease cutter (for paintwork) research professional PAINTSHOP videos and not random guys using rattle cans with good luck and intention. Waking up in the morning just to see your beautiful finish has morphed into another week of work is heartbreaking.
@larylhuntington5398
9 ай бұрын
Love the car, the color and especially what you did with the back bumper. Also loved the message at the end. You did a great job bro. God Bless.
@lildno2007
Жыл бұрын
Great Job. You definitely was my inspiration for rustoleum paint jobs. I learned so much from you ❤
@broncoramfan
Жыл бұрын
Just asking to ask how much cheaper if it is cheaper is using 8 cans vs buying traditional clear you sprsy out of a hvlp gun. Thank you for your time n great video once again
@jordanbest3926
Жыл бұрын
Depends on the clear coat you want to compare it to. The 8 cans are pushing $160+. Gallon of sprayable clear from speedokote is going to range from $89-$159. The cans just simplify the process but I wouldn’t necessarily consider it a cheaper option UNLESS you’re buying all the equipment too.
@JamesDguy
Жыл бұрын
@@jordanbest3926correct
@JamesDguy
Жыл бұрын
Well using cans is quiet that’s why I went that route because a compressor is loud and the neighbors will report me but it’s almost the same price depending on the clear. The price of a gun, compressor, air line, water separator and clear is more expensive though.
@broncoramfan
Жыл бұрын
@Moore Motorsports Garage I've seen you use a gun before so I know you know how to use it but I completely understand about the neighbor thing. I was just looking to compare the 2. Thank you for your response
@derekshane8786
2 ай бұрын
Using rustolium 2x satin spray can. Should i or do i need to wet sand before i put on any 2k clear coat at all?? I cant spray the clear within the tacky time of the rustolium.
@jeffreyortiz8361
Жыл бұрын
Yah Bless you! Great job! Keep spreading the WORD! 🙏❤️🙌🔥💪💯
@emmanueln.8020
Жыл бұрын
You really need to open up a shop. You can help a lot of people out that don’t have a lot of money to spend on a good quality paint job your paint jobs come out Awesome and very professional looking keep it up brother we appreciate it. Great Contant.😎👍
@apismalik
Жыл бұрын
pro painter will hate this
@RealMTBAddict
Жыл бұрын
Content
@ricardomiles6826
Жыл бұрын
@@apismalik I do
@kais2345
Жыл бұрын
Probably hard to do this as a shop as the paint will fade within a couple of years (assuming it's garaged and looked after, it will fade much quicker if exposed to sun) and it still takes enough man hours to do all the prep work that it'd not be cheap to pay for. It's more of a fun/cheap alternative if you have spare time and enjoy doing this kind of thing :) All that said, while it's fresh it looks very fresh.
@amberdamas9455
Жыл бұрын
LOVE HOW YOU INCORPORATE GOD IN EVERY THING YOU DO SOMEHOW LOVE IT GOOD IS GOOD!
@michaelm_713
Жыл бұрын
Awesome JOB!! I’m looking forward to trying to do my own paint on my Civic next month hope it turns out somewhat OK 😂
@davidmackinnon2515
Жыл бұрын
This color would be great on a 57 chevy truck!!
@ВикторТухтаров-х2ш
Жыл бұрын
@Super.
@kingkobra91yt46
Жыл бұрын
Brother God bless you 🙏🏻
@bradybowling5766
9 ай бұрын
What kind of respirator do you use when spraying the 2k clear?
@frontlinegang480
2 ай бұрын
How many layers of clear coat is safe
@icasualyt8875
2 ай бұрын
@@frontlinegang480 3 Maximum
@AB-C1
Жыл бұрын
Nice job! The price is ridiculous expensive now though 6 cans £220! (That's about 280-290usd!! ) Shame was going to re-clear my BMW. Nevermind. 👍🏴🇬🇧
@JamesDguy
Жыл бұрын
Here in the USA it’s like $120 usd
@mississippiman89
Жыл бұрын
Amen!
@ghost.of.aleksz.salad.
Жыл бұрын
iv been painting with spray cans for 24 years, they can make a amazing end result if you know what to do and get lucky with the chemical reactions, some times paint just reacts bad to the base coat or even on its own coats that are half dried..
@exerperez420
Жыл бұрын
Good job brother God bless you and your family Hello 👋 from Puerto Rico 🇵🇷 🙏🙏🙏❤️❤️❤️🇵🇷🖖
@leefisher9211
Жыл бұрын
Did you let each coat dry some before the next coat im getting ready too clear my paint job
@LidiaVTuber
Жыл бұрын
did you wetsand + polish then clear or just wetsand then clear
@godssilentassassin4325
Жыл бұрын
Hey, so I’m using the Rust-Oleum 2X Navy blue on my 02 Mustang. So far the results look good but a few runs. I’ve let the car set for a couple days. What do I need to do to get them out before using the 2k? And then after wet sanding with 1000 grit, do I need to apply anothe coat of paint or can I go ahead with the 2k clear?
@bacop001
Жыл бұрын
The glaze or filler tecnique is great for runs and it really helps avoid break through, and its flat then clear .
@Questionbhv
Жыл бұрын
Nice Job ! The idea with the Carbon Hood could be good contant to lay some carbonfiber with epoxyresin to have a "carbon look" hood for cheap . Keep it up
@JamesDguy
Жыл бұрын
Would be cool but I’m not that skilled haha
@RatliffRacing
Жыл бұрын
Amazing Job Brother. God has Blessed you with cool talent i have been painting cars for 15 years and that paint job is killer. God Bless and keep up the good work.
@naryanclaudy2116
2 күн бұрын
This is gorgeous . I’m doing my bike this color. So, what grade of paper did you use for wet sand. Also how long did the 2k dry for before wet sanding?
@dennisrobinson8008
Жыл бұрын
I'm not finding a chart converting manufacturers color codes to rustoleum. Did you have that info?
@kevinmerrill8074
Жыл бұрын
Great product, make sure you wear a proper Mask when spraying this stuff it’s harsh and can really screw you up.
@stevechow2992
Жыл бұрын
Hi. Can I message you privately? I have question regarding semi gloss black on a hood.
@JamesDguy
Жыл бұрын
moore_motor_sports@yahoo.com
@sacul7694
Жыл бұрын
I know Killeen TX very well. Was stationed at Hood back in 93. You would laugh at my spray can paint jobs on my old 74 nova. Looks killer man!
@Joeak74
Жыл бұрын
Is the 2K clear compatible with all of the Rust-oleum paints? Can you also color sand the clear and then cut and buff it for a mirror shine? Is the 2K clear just like a catalyzed automotive clear? How long until dust free? Thanks man. This channel is VERY inspiring!
@JamesDguy
Жыл бұрын
Well I have used it with other rustoleum. I have sprayed the clear while the 2X paint was still tacky and it worked great but with this paint the painted used in this video and other videos I prefer letting it dry then wet sanding and clear like I did for best results. It can still be wet sanded and buffed for a even better shine and smooth finish like I did on my wife’s pink crv video
@apollo2704
2 ай бұрын
Would you recommend doing 1k grit wet sanding with black gloss spray paint? Or would the scratches show?
@RAHIWAadeyNayGdiniyu
25 күн бұрын
Plus do you wipe it with alcohol??
@KreativeKerri
Жыл бұрын
As a crafter who uses spray paint, what are your thoughts on the plastic handle thingy? Not sure what it is exactly called, obviously. I t holds the can and when squeeze trigger the spray nozzle pushes down and paint comes out. For me it saves my finger on the bigger jobs. I cant even imagine doing a car by finger!
@henrythompson5624
Жыл бұрын
So do you wet sand the gloss down from the color 1st before the 2k gloss for a better look You're motivated me but I want to take my spray painting skills to another level like yours
@JamesDguy
Жыл бұрын
Yes 100%
@henrythompson5624
Жыл бұрын
@JamesDguy thanks alot I'll try that
@acevedohiram
Жыл бұрын
She looks even better bro, too clean🧼🧼
@jonfishmacon
Жыл бұрын
Jesus is Good
@xXBlownReaperXx
4 ай бұрын
What if you wait a week after the base coat to dry before wet sand and 2k clear???
@ThriftMachine
Жыл бұрын
The garage door insulation how well does it work? GoPro Firmware upgrade should fix the issue.
@JamesDguy
Жыл бұрын
We did that and didn’t fix it. Also it works decent since the sun beats on it most the day
@syafiqiman3487
Жыл бұрын
Wetsand the clear and buff it...The orange peel made it not so shiny
@FACELESSC7
Жыл бұрын
PLEASE ANSWER THIS FOR ME BROTHA , Once I’m done painting do i wet sand the base coats and buff &polish before applying clear coats than wet Sand the clear coats and buff and polish again ? PLEASE HELP ?? God Bless 🫶🏾
@BRIDGEBURNERSTV
Жыл бұрын
The labels of each product should tell you what grit the surface has to be prepared at. Usually no need to sand (especially polish) base coat before clear, but you can wet sand (at a high grit) and polish after if you really want to make it shine. Read the labels tho, they should specify everything.
@COU51N.Kyle.
Жыл бұрын
Fresh fresh fresh!! So sick
@DC2thomas
Жыл бұрын
Awesome video
@JamesDguy
Жыл бұрын
Appreciate it and DC2 content soon!
@LowNKum
8 ай бұрын
when you wash, is it okay to go through the spray wash with that? how long till you start to consider to repaint? I have a TSX which is Black Sand Pearl ... the paint is gone and I want to do something like this - seeing the Turbo paint comes in clear now.
@killedbyshadows1500
8 ай бұрын
curious as well. i wonder how long paint jobs like this actually last. im considering on doing something like this to me 08 honda civic
@danks2real314
4 ай бұрын
a week
@user-pwfus
Жыл бұрын
Looks wicked for a spray can paint job water sanding is the key for that no orange peel shine ;)
@GorrillaFastTv
7 ай бұрын
Bro I been watch you for a lil min and your skills are crazy with the rattle can 🔥🔥
Пікірлер: 403