Great approach.... Understood very easily.. Thank you for Educating me
@uzairsaifullah6509
5 жыл бұрын
Thanks for making this very concise and to the point video. Can you please share the documents which you are showing in the video?
@Shameer-zb5rz
5 ай бұрын
Quality content 👍🏼
@balunaveen6758
3 жыл бұрын
Thank you very much.. I got many details about valves....💝
@srikantakumarmohanty7989
11 ай бұрын
Great explanation
@anilt483
5 жыл бұрын
It was great. Thank you
@vidyadham1772
Жыл бұрын
Thanks bro, appreciated.
@hadiabdollahi1923
3 жыл бұрын
Great
@Avisszable
Жыл бұрын
Hii..! Why you don't upload new video?? Your video is really good and you explain very well.. 👍
@akilkazi381
4 жыл бұрын
Superb explaination
@TheSyahdi78
4 жыл бұрын
Next design tips please....API 6D check valve vs API 594 check valve..
@faizulirwanothman799
6 жыл бұрын
Hi Stephan, can you explain how the pressure is seals for SPE and DPE. Also the self relieving. How self relieving is made?
@abhishekgupta-km3rv
4 жыл бұрын
very informative
@marcrenz8000
7 жыл бұрын
If you are discussing cavity relief you need to discuss DIB1
@Koliha74
3 жыл бұрын
gas valve need maintenance?..lubrication ?..or free maintainance..
@sk_travelogram2226
3 жыл бұрын
👍👍
@abdelfattahkhyralla2203
7 жыл бұрын
Stephen what do you mean by saying designing a valve? do you mean an engineer to design a valve and the Manufacturer to manufacure what the engineer designs
@ValveChannel
7 жыл бұрын
Yes exactly. Valve design engineer will design different valve by different standard and customer demand.
@mukeshmehrishi9811
6 жыл бұрын
Can we know how the dia of ball is calculated as some people give smaller dia of ball to reduce cost.What should be optimum diameter of ball
@misseghe3239
5 жыл бұрын
thank you so much
@mohammedameeruddin3445
3 жыл бұрын
Pls help me to find document in which dpe and spe is explained with figures...
@อาคมมากบุญ-ภ7ฐ
4 жыл бұрын
ขวางทางแต่ไม่รู้เขาทำไร
@junkiing93
7 жыл бұрын
Mr. Stephen, what Is the different between ASME B16.34 and ASME B16.5? Are materials listed on both of them satisfy the API 6D? Thanks
@pradeepabg52
6 жыл бұрын
I will try to share what I know - ASME B16.34 is Basic standard for Valves (Flanged, Threaded and Welding ends) for Material selection, Pressure and Temperature rating, Min Bore Dia, & Min Wall thickness of the Valve where in case of ASME B16.5 is used to Chcek or Design the Flange ( PCD, No. of Holes and Dia of Holes) Yes your correct its containing material table but not to prefer to use for design and API 6D Says to check the Group of Material in ASME B16.34 once again for design.
Пікірлер: 35