How To Scan 𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟑𝟔𝐁 36°East On Qsat Decoder
To scan Eutelsat 36B at 36° East on a Qsat decoder, follow these steps:
Step-by-Step Guide
1. *Connect Your Qsat Decoder:*
- Ensure your Qsat decoder is properly connected to your TV and satellite dish.
2. *Power On:*
- Turn on your TV and the Qsat decoder.
3. *Access Satellite Menu:*
- Using the Qsat remote control, press the "Menu" button.
- Navigate to the "Installation" or "Setup" menu (this may vary slightly depending on your Qsat model).
4. *Select or Add Satellite:*
- Go to the "Satellite List" or "Satellite Setup" option.
- If Eutelsat 36B is listed, select it. If not, you will need to add it manually:
- *Eutelsat 36B*
- Orbital Position: 36° East
- LNB Frequency: 9750/10600 MHz (Universal LNB)
5. *Configure LNB Settings:*
- Ensure that the LNB settings match the specifications of your satellite dish's LNB. Typically, for Eutelsat 36B, the LNB type is Universal with frequencies of 9750 MHz (low) and 10600 MHz (high).
6. *Add Transponder Frequencies:*
- Navigate to the "Transponder List" or "TP List" under the Eutelsat 36B satellite settings.
- Add the transponder frequencies. Here are some example transponder settings for Eutelsat 36B:
- Frequency: 11900 MHz
- Symbol Rate: 27500 KS/s
- Polarization: Vertical
- (Add other transponders as necessary)
7. *Perform Blind Scan:*
- After configuring the transponders, go to the "Blind Scan" or "Auto Scan" option in the installation menu.
- Select Eutelsat 36B and start the scan. This will allow the decoder to automatically search for all available channels on the selected satellite.
8. *Wait for Scan to Complete:*
- The scanning process might take several minutes. The decoder will find and store all available TV and radio channels.
9. *Save Channels:*
- Once the scan is complete, save the channels. You should see a list of available channels from Eutelsat 36B.
10. *Exit Menu:*
- Exit the menu and start watching the channels.
Additional Tips
- *Signal Quality:* Ensure your satellite dish is correctly aligned with Eutelsat 36B and there are no obstructions blocking the signal.
- *Software Update:* Make sure your Qsat decoder firmware is up to date. Updates can improve satellite scanning and channel reception.
- *Manual Scan:* If the automatic scan does not find all channels, perform a manual scan by entering specific transponder frequencies and symbol rates.
Example Transponder Frequencies for Eutelsat 36B (36°E)
Here are some example transponder frequencies you can use for manual scanning:
- *Ku-Band:*
- Frequency: 11747 MHz, Symbol Rate: 27500, Polarization: Vertical
- Frequency: 11766 MHz, Symbol Rate: 27500, Polarization: Horizontal
- Frequency: 11804 MHz, Symbol Rate: 27500, Polarization: Horizontal
Make sure to verify the latest transponder information, as these can change over time. You can find updated transponder lists from satellite information websites or forums.
By following these steps, you should be able to successfully scan and receive channels from Eutelsat 36B on your Qsat decoder.
__________________________________
LINKS
WEBSITE:
www.pbteck.com
INSTAGRAM;
/ pbtecknology
FACEBOOK;
/ pbtecknology
TWITTER
/ pbtecknology
TELEGRAM:
t.me/pbtecknology
#pbteckinfo #lnb #gotvinstallation #multitv #dishtv #directtv #dstv #satellitetv #dish #satellitedish #satellitereceiver #pbteck #pbtecknology #canalsat #canal+ #freefire
Негізгі бет 💎 𝐄𝐮𝐭𝐞𝐥𝐬𝐚𝐭 𝟑𝟔𝐁 36°East | Full ScAn | KU Band | Dstv Channel List | Qsat Decoder | Pbteck
No video
Пікірлер: 2