First koni yellow sport install I’ve found. For the price one would think it would have better instructions, hence all the parts and using old OEM parts.
@MDVLmedia
10 ай бұрын
Agreed! I wish I had thought to start making it from the beginning of the install, but at least the front was fairly intuitive.
@Venom-ct8yy
Жыл бұрын
Great video, when you replaced the bushing , how did you know you were at “ride height” when you raised the jack?
@MDVLmedia
Жыл бұрын
Thanks! Doesn’t need to be exactly ride height, but you want it around there just to reduce any binding.
@reesecup4567
Жыл бұрын
Do you have a video for the fronts?
@MDVLmedia
Жыл бұрын
Sorry Joe, I do not. But if you follow the link in the description, there is a video that shows the overall process. Its for coilovers, but that’ll get you 95% of the way there. If you have any additional questions about the install, Id be happy to help.
@reesecup4567
Жыл бұрын
@@MDVLmedia is there a small bearing in the strut mount that can sometimes come off and stay stuck to the OEM shock shaft?
@MDVLmedia
Жыл бұрын
@@reesecup4567 Are you referring to the silver collar you can see at around 45 seconds in the video? 0:40
@reesecup4567
Жыл бұрын
@@MDVLmedia Yes! My Konis dont have them. Do I have to swap them over from the oem shocks on to the Konis?
@MDVLmedia
Жыл бұрын
@@reesecup4567 Nope! That collar is what the top portion of the strut assembly sits on (which you will swap onto the Konis). The Konis have sort of a shelf, where the shaft becomes wider. This serves the same purpose.
@khoazyxo
10 ай бұрын
What was the whole point of replacing the rear bushing on the knuckle?
@MDVLmedia
10 ай бұрын
The first side (not in the video) was destroyed. I forget exactly how now, but it was not useable.
@khoazyxo
10 ай бұрын
@@MDVLmediahow bad was the alignment on the rear toe and camber? Did you buy rear camber arms and rear toe bolts?
@MDVLmedia
10 ай бұрын
@@khoazyxo Camber and toe were both pretty rough when I finished. I tried to get an alignment done by two different places and they were unable to get my camber within factory spec. I ended up buying adjustable rear camber arms and adjustable front full upper control arms. Toe was adjusted to spec with the factory toe bolts.
@khoazyxo
10 ай бұрын
@@MDVLmediaword thanks for the help bro I appreciate it 👍
Пікірлер: 20