If you got rid of that awful background music, this would be a really good video.
@Dancyn3Dprints
2 ай бұрын
Yea, I did on future videos. Go check them out!
@jordaynerjr
3 ай бұрын
Background music plus the sound of the printer is killing me lol But I still watch the whole video 😂
@Dancyn3Dprints
3 ай бұрын
Ahhhh ill try and edit better and get a mic
@Dancyn3Dprints
3 ай бұрын
Sounds like a damn server room
@oweckayx
3 ай бұрын
Exactly the same here! Hated bg music from start till the end, but information are so good that I watch throught it as well :D
@NWGR
3 ай бұрын
Congrats on your success dude! I have three A1s and if can achieve even a fraction of your success selling prints I'd be extremely happy. I've been very happy with my A1s. Reliable and fast and nozzle swaps are very easy. Subscribed. 🙂
@Dancyn3Dprints
2 ай бұрын
Awesome! Thank you! Love the A1
@gopinath4119
3 ай бұрын
I think its better to have few air purifiers keeping you guys health in mind. I am also starting a small business and this inspires me a lot. All the best.
@Dancyn3Dprints
3 ай бұрын
I have 3 air purifies and 2 fans plus the HVAC fan running. I also try to open the bay door as often as possible
@Az.24
3 ай бұрын
Please Lower down the music so we can hear you clearly thanks
@ag3moi
3 ай бұрын
yea it was super distracting good sir
@Dancyn3Dprints
3 ай бұрын
Sorry. Will do. Not very good at video editing lol
@thomasduffles4537
3 ай бұрын
Why not use 3kg spools for the P1P and P1S? You could place wall mounts to hold them for easier access to the spools.
@Dancyn3Dprints
3 ай бұрын
Haven't been able to get a supplier to get me 3kg spools of silk pla.
@bobohousekoyo
3 ай бұрын
Nice job 😉my curiosity is how you manage all printer efficient; only with panda touch or you are using other print farm management software?
@Dancyn3Dprints
3 ай бұрын
I'll make a video about this
@EIEIOOOOO241
3 ай бұрын
That's a whole lot of Bambus! At this point you need a sponsorship from Bambu. 😂
@Dancyn3Dprints
3 ай бұрын
That would be nice
@TechTomVideo
Ай бұрын
hi, cool video. how do you manage printjobs and the printer themselves? do you use a dedicated software or how do you keep track of that much stuff? best regards tom
@Dancyn3Dprints
Ай бұрын
Hi Tom I went over this in one of my vlog videos. Forgot which one lol
@TechTomVideo
Ай бұрын
@@Dancyn3Dprints ok ill search. Thank you
@roundcheesewheel
3 ай бұрын
Wow so interesting to hear that you went from a large Prusa farm to a gigantic Bambu farm. I currently have 3 Prusa's spanning from MK2.5S to MK3S and would like to purchase 4 new printers and cant decide on Bambu vs. more Prusas. Definitely leaning more towards Bambu now.
@Dancyn3Dprints
3 ай бұрын
The mk4 is also... almost double the a1 combo 🤑
@waynevance5045
3 ай бұрын
This is great content. So much useful information about a print farm. How did you decided what items that you wanted to print in your print farm? Looking forward to your next video.
@nonamenone4540
3 ай бұрын
From my experience, I'd always prefer one a1 combo over 2 MK4S. Bambulab is just way superior
@ThingsYouMightLike
3 ай бұрын
Are you completely on Etsy? Or do you sell elsewhere? And which patreons do well for you? I'm uninterested in competing in the online patreon market, but wondering what tends to do well to put in local shops. Thanks!
@Dancyn3Dprints
3 ай бұрын
Ebay, Walmart, qmazon, etsy, tiktok shop, shopify
@davidmann4436
3 ай бұрын
So I see you have different bases under your printers. Boards, card board boxes, and the square dark cushion pads. Those are on top of the metal shelf grids. So which do you find to be the best, or which are you going to standardize on?
@Dancyn3Dprints
3 ай бұрын
I do what's the cheapest and what works for me lol... cardboard works fine. Those wooden shelves are from ikea and they cost $3-$5 each. I could also cut MDF board but honestly the cardboard works fine and doesn't cost me anything
@berlinberlin4246
3 ай бұрын
Thank you for the video. But please just skip the music all together! Better just the printer noise and you speaking.
@Dancyn3Dprints
3 ай бұрын
Yea sorry I Wil lower the music going forward
@jesusochoa3721
3 ай бұрын
Your living what i want to do. Also You should invest in a mic or bring your audio levels up the background music down.
@Dancyn3Dprints
3 ай бұрын
Yea I am planning on getting a mic. Just recording with my phone and editing on my phone as well.. just seeing if people are actually interested in watching this type of content
@jesusochoa3721
3 ай бұрын
@@Dancyn3Dprints definitely interested ✌️. Also capcut is a good editing software thats free.
@fish3dp372
3 ай бұрын
@@Dancyn3Dprints Look at the DJI mic
@dakotabrown9147
3 ай бұрын
This is the type of vlogs I want to watch. Just show use the life of running a print farm. It’s so neat to see how you built this business. Can’t wait to follow the journey and see where you take it! Can you maybe begin to have some videos of tips and tricks you use around the farm such as how you go about cleaning beds and running so many printers?!?
@TheHelpfulHater
Ай бұрын
If you don't mind me asking, what are some of the products that you would recommend to design, print and sell. I don't yet have the capabilities to be able to make minifigures but I can make modals that do tasks. Some examples would be, Simple pencil holder, clip on headphone holders, storage containers, airbox cover for a engine, Stuff like that, etc. Just cant have complex geometry. Any advice is always going to be helpful. Thank you - Moonlight
@vintageludwig
Ай бұрын
Dang dude save some printers for the rest of us!
@Dancyn3Dprints
Ай бұрын
I need more
@baler1992
3 ай бұрын
Can you talk about why you run so many printers? Do you dedicate printers to certain designs? Seems like no way 1-2 people could keep up with that many if they ran 24-7. I have 3 P1S and I can hardly keep up with the number of parts they can generate…
@Dancyn3Dprints
3 ай бұрын
Check out my vlog #9 I talk about this a little
@qb9044
5 күн бұрын
Are these app your own designs ? Looks like alot of very successful work
@ThingsYouMightLike
3 ай бұрын
Also, what's the best option for bulk, duel color silk PLA?
@Dancyn3Dprints
3 ай бұрын
I get my plastic from alibaba manufacturers for about $11.5/roll landed
@francogalaz4202
3 ай бұрын
What is your store?
@Dancyn3Dprints
3 ай бұрын
Dancyn 3D prints
@Caminando_con_Aitor
2 ай бұрын
Very useful, thank you. Your new videos are better without the music, keep publishing!
@Dancyn3Dprints
2 ай бұрын
Thanks!!@ im learning lol
@scruffy3121
3 ай бұрын
Depending on the size and material you print, I would argue to a1 mini is the best. There is nothing faster than another printer and the a1 mini is so damn cheap.
I've noticed your raspy voice and the clearing of your throat in all your videos. I'm seriously curious... do you think there is any correlation with your "health issue" or "raspiness' and constantly being around all the printer fumes or VOC's or whatever? I worked in a plastic part extrusion factory once with a guy who sounded just like you and I always thought it was from the plastic fumes but I didn't keep that job too long.
@Dancyn3Dprints
3 ай бұрын
Lolol nah it's from allergies and there is a polyp on my vocal chord.
@BoxcarsWorld
3 ай бұрын
Yeah my allergies are horrible too. Glad it's not printing related...
@ag3moi
3 ай бұрын
i love your setup, im hoping one day to get to that level, curious though. how much does your rent cost and when is it ideally worth it to get a space like that? i got 7 printers only atm
@Dancyn3Dprints
3 ай бұрын
That's a question only you can answer. Depends how how much you value you're free time. If you want to expand. Hire employees. Etc
@MakerMark
17 күн бұрын
Seeing a lot of print failures . Whats up with that
@SVCprints
Ай бұрын
So are you paying each person for their commercial rights? I’d be curious to see a video about the ins and outs of that. Cause I start looking and it’s like man I’m going to spend $100’s a month just paying for commercial rights.
@Dancyn3Dprints
Ай бұрын
You don't need to sub to that many
@LifeofAntontheOfficial
3 ай бұрын
Which nozzle do you use for all the printers? How do you stay organised and print on all off them all the time? How do you manage the print schedual?
@Dancyn3Dprints
3 ай бұрын
0.4mm.. I think I answered most of this in my video
@PronoxGTR34
13 күн бұрын
So you going to be rich with that ? or just working 24/7 to selling shit toy`s ? Don't get me wrong... but for me 3D printers are there to produce things that are actually needed. Spare parts, for example, or things that cannot be produced in any other way.
@Dancyn3Dprints
11 күн бұрын
I'll give you an update when the year ends on how much I made
@PronoxGTR34
11 күн бұрын
@@Dancyn3Dprints yeah taht will be nice ;D
@StudioCreations
2 ай бұрын
Awesome behind the scenes video on how you use the Bambu printers for your business. Great insight into what to think about when purchasing one of these. I am still torn between an A1 and a P1S. I have not made up my mind yet, but I am getting close. Thanks again for this video. All the info helps with my decision process. :)
@Dancyn3Dprints
2 ай бұрын
@@StudioCreations no problem.. you can always get both lol
@cpyou
Ай бұрын
@@Dancyn3Dprints Just wondering what makes the carbon the printer to get to start over the A1? Looking at the specs the only thing that stands out is the ability to use a wider range of filaments with the Carbon. Just starting to look at these printers to add to my Laser and UV printing.
@marcellussaunders4200
3 ай бұрын
Can all machines be controlled from one computer?
@Dancyn3Dprints
3 ай бұрын
Yes
@mistermiagi4552
3 ай бұрын
Is the A1 print quality as good as Core XY printers?
@Dancyn3Dprints
3 ай бұрын
Quality wise can't even tell the difference
@MannyCo
3 ай бұрын
I enjoyed watching you go through this. The changes you made were very logical. I also agree that the Bambus changed the whole game.
@Dancyn3Dprints
3 ай бұрын
Thanks for the input
@andriusanryy5165
3 ай бұрын
Thank yo ufor video. What country you are?
@Dancyn3Dprints
3 ай бұрын
USA
@JimHarmer
2 ай бұрын
Cool vid. Please turn off the music.
@Dancyn3Dprints
2 ай бұрын
Check out my other videos
@RandoTechNerd
Ай бұрын
Yeah I'm super interested in what you're doing! But the printer sound is kind of ruining the video (happens to me too) I use a pixel and know there is also a way to reduce the noise post, please give it a shot.
The video editor has this but it makes the voice sound muffled don't like it
@RandoTechNerd
Ай бұрын
@@Dancyn3Dprints 😂 I have a single ender 5 with the "silent" board I was comparing oranges to pineapples. The noise reduction on the pixel has done wonders for me on the ferry and the streets of Seattle, if you have access to a pixel you should try it out. I'd be super interested in how it does in your scream factory.
@Dancyn3Dprints
Ай бұрын
@@RandoTechNerd pixell as in the Google pixel phone?
@piaskownica7648
3 ай бұрын
Why you are not using 3kg spools?
@Dancyn3Dprints
3 ай бұрын
Can't find suppliers to supplier me 3kg of dual and tri color pla
@Piggy2252
3 ай бұрын
What patreon do you get your models from
@Dancyn3Dprints
2 ай бұрын
Mcybeer, cindereing3d, zou3d just to name a few
@louisheidi4682
Ай бұрын
What do you do for ventilation?
@Dancyn3Dprints
Ай бұрын
I open the door
@damron2
3 ай бұрын
the music wasnt needed, to loud. its hard to heard you and the printers over the music
@Dancyn3Dprints
3 ай бұрын
Gonna get a good mic and only add music when I'm not talking
@unclebill5170
3 ай бұрын
I’m thinking of going with a p1p and a a1 with the 4 spool ams for my first 3d printer setup looks like the best of both worlds
@Dancyn3Dprints
3 ай бұрын
Try both see which you like
@sunrisetacticalgear2676
3 ай бұрын
Thank you, you answered my question. I have decided to purchase the X1-Carbon as my first all around printer. I don’t want to be limited to filament options in the future. With the current sale it takes some of the sting off.
@Dancyn3Dprints
3 ай бұрын
With the current sale price it is probably the best value for your money imo
@afraser345
3 ай бұрын
Thank you for the video
@Dancyn3Dprints
3 ай бұрын
You're welcome
@thenextlayer
3 ай бұрын
Great video, but I do have a few tips for you. First of all, you know Bambu Lab has a wholesale program, right...? Second of all, you don't need AMS's... you need to buy 3-5kg rolls :) Looks like you're using 1kg rolls, which are not only more expensive, but also have to be swapped much more frequently. But what do I know... I only have 15 printers ;)
@Dancyn3Dprints
3 ай бұрын
Haven't been able to get 3-5kg rolls of silk pla. Only regular. I am on Bambu wholesale and tax exempt program
@fish3dp372
3 ай бұрын
Good job!!
@Dancyn3Dprints
3 ай бұрын
Thanks!
@bobohousekoyo
3 ай бұрын
and 2nd curiosity 😁 you tried any solution to release the parts automatically from plate?
@Dancyn3Dprints
3 ай бұрын
I have tried but it doesn't really work well for the items I print
@grifftech
3 ай бұрын
Link to where you sell your stuff?
@Dancyn3Dprints
2 ай бұрын
Online marketplaces
@hobbycollector
3 ай бұрын
the music man..the music. Pleasee
@Dancyn3Dprints
3 ай бұрын
I'll lower it
@levytek
3 ай бұрын
How can I find your store?
@Dancyn3Dprints
3 ай бұрын
Online
@levytek
3 ай бұрын
@@Dancyn3Dprints can you give me a link?
@k-12clothing23
3 ай бұрын
Yup, I’m ready for this video.
@Dancyn3Dprints
3 ай бұрын
Thanks for watching!
@SeaTaj
3 ай бұрын
Email bambu and ask for bulk pricing on AMS. Im sure they will give you a break on 50 units.
@Dancyn3Dprints
3 ай бұрын
I did they won't do anything they have other distributors here in the US but the discount is very minimal.
Пікірлер: 121