Nice seeing all the family together in the recent videos
@johnnyholland8765
6 жыл бұрын
Its coming along..... Speaking of Cody and from how you describe him he must be a good kid. If it is what he wants keep him on the farm. The farm is a good place to be. It will keep him out of trouble. There are so many young people with no direction. What ever he chooses to do in life encourage him and help him if you can. Welders make a good living. I know he will do good whatever he does in life cause you have taught him a good work ethic and that goes a long way.....
@ednabraden406
6 жыл бұрын
Johnny Holland big mouth
@darthvader4hire
6 жыл бұрын
you guys are havig WAY too much fun bantering back and forth...and ole Pa is looking well:)
@jamesmckay9966
6 жыл бұрын
Teresa, The shop looks much cleaner which i suspect because of you. You are adorable. Jim in Idaho
@markgamble8377
6 жыл бұрын
Valuable lessons those boys are learning.
@SportPilot69
6 жыл бұрын
Great job Mr. Wesley! I love your videos. It’s refreshing to see a man teaching young men to be men. Thank you.
@advandervelden1588
6 жыл бұрын
Cody is a good welder. You can hear de welder "singing"when he's welding. That is the sound of a well-adjusted welder.
@michaelbrown8545
6 жыл бұрын
Always important you bar an engine over in the direction of rotation when setting valve lash and timing. If you need to go backwards go past the mark and come back on it in the correct direction to get all the drive gear clearance out. Notice Wes worked it out in the end. Cheers mate 🍻
@ischmel3884
6 жыл бұрын
Those Lincoln "Pipeliners" are keepers. A custom retro restoration,.... Welders Wet dream!
@harrydeehenderson7607
6 жыл бұрын
This is the cleanest the shop has been EVER.
@IronClad292
6 жыл бұрын
Thanks Wes for keeping the banter back and forth in the video. It's just as interesting as the tractor build itself, LOL.......
@codyallankennedy1236
6 жыл бұрын
U do so good in ur life with the loss of ur sister is hard u make me proud at how great of a father u are I love watching ur videos because I've learned a lot from u I hope I hear a response would make my day I hope one day I can come to ur farm and learn more about tractors thank u for all that u taught me u deserve father of the year bud keep up the great work
@sr633
6 жыл бұрын
Glad to see the Bob Cat is now purring along and Tim is getting those support bolts tight !
@rev600hods
6 жыл бұрын
Thereasa is getting that shop in shape.
@andrewwaltz7579
5 жыл бұрын
She's got a very big job
@ml2trick
6 жыл бұрын
Good Video. Always watch and you guys are a Good Group. The family is all you have in my World. Sweet Build.
@peterpepich2693
6 жыл бұрын
GLAD TO SEE ITS ALL COMING TOGETHER, I'M SURE IT WILL RUN GREAT
@pennybenton1204
6 жыл бұрын
Great videos. I really enjoy them. yes those Lincoln welders are dam good. To hell with the haters.
@kevinwillis9126
6 жыл бұрын
good call Wes not letting Tim try to pick the front end up.. I tried to pick something to heavy up many years ago and f**ked my back up and regretted doing it ever since.. Thanks for sharing Wes and family....
@captnjax911
6 жыл бұрын
Wes, that's awesome what your doing for Cody. Tractor looks good, coming along...
@bossDmaster
6 жыл бұрын
Great video. Looking forward to the startup.
@randyrhodes7526
6 жыл бұрын
I am in early on this one, as always very excited for this build, Thumbs up click !
@janvandenbos7085
6 жыл бұрын
Very nice again Wes OK 4010 Engine#16 stick it in there, with the Skid Steer, Teresa mentioned OK lol, I am not holding it anymore for the start up 😲💥😲💥😲💥😲💥🚜🚜🚜🚜🚜🚜
@dewainwoodard4840
6 жыл бұрын
Great video Wes thanks for sharing
@dewainwoodard4840
6 жыл бұрын
Lol
@agriman86
6 жыл бұрын
You guys are fun to watch. I can't wait to see it go . Great stuff!!
@CHOPSHOPUNDERGROUND
6 жыл бұрын
Still watching! You guys/girl are doing a great job putting it back together.
@Blasterxp
6 жыл бұрын
Dont care, he is family! Cody, you belong there!
@backwoodzcustomz1549
6 жыл бұрын
Left and right is always done from the operators seat. I've been in the parts industry over 15 years that's why I always double check if they want driver side or passenger side..
@4gauge10
6 жыл бұрын
Looks good Wes and family,the"heritage limited edition 4010"going together fairly smoothly.Tim is trying to be the Incredible Hulk without Lou Ferrigno in the last few minutes of this video...HAHAHA!!.
@The_JEB
6 жыл бұрын
My friends grandpa has one of those big welders in his shop, its really neat and it still works, he used it to fix stuff on the farm when he wasnt trucking.
@jamesmckay9966
6 жыл бұрын
That Welder looks like US Navy surplus to me. Jim
@farmworkMi
6 жыл бұрын
I love that you prupusly made this motor sit for a year and then rebuild it to just prove to people that it's possible to leve and come back to a project love every video keep up the wonderful work and come see my channel trying to get started
@canvids1
6 жыл бұрын
I get a kick out of the bantering and is all part of life and getting along. It's going well Wes and family.
@MichaelPMc
6 жыл бұрын
Something we can't get in the video but is always remembered by any who have done this type of work is the smell. I miss that smell
@jamesmckay9966
6 жыл бұрын
Wes, That Welder looks like a Navy surplus . Keep up the good work. Jim in Idaho
@gerryvanwoerkom7241
6 жыл бұрын
love it when all the family comes on down .. that's what farm families are about
@gregdietrich2334
6 жыл бұрын
Best set of videos yet! I don’t understand why some of these very hard to reach spots that need to get painted are not done during assembly.
@bucksgarage1
6 жыл бұрын
good to see Tim back in the action... im looking forward to you guys fixing ''his'' 4960
@FarmingFixingFabricating
6 жыл бұрын
Awesome videos, I have a1972 4320 as well. They made them in 71&72, they made the 4620 the same years. The 4520 was made in 69&70 they had issues with air cleaner coming apart and they later updated some of the 4520's with the 4620 engines. The 4520 was Deere's first tractor with a turbo and there 4620 was the first intercooled tractor that Deere produced. The 404 was used in the 4320,4520&4620,4430&I think the 4630 as well.
@stuartsplace100
6 жыл бұрын
she looks awesome Wes,the tractor,i learn how to drive on a JD back in the late 60`s,i think they were 2 cylnders,narrow front end.
@dallen122758
6 жыл бұрын
His shop is like ours we need an over head gantry crane. With so much shit you do you could make it where it covers the hole shop. You can have a electric chain fall and a few regular chain falls, it would make your jobs go easy you could put anything anywhere. ours is coming one day we use a john deer with a front end loader and a knock down A-frame we can put up is was built to pull engines out up to a 32 foot and smaller shrimping skiff it went from dock to dock pick the engine up pull boat out move a small boat in lower motor on small boat load on trailer and bring it where it has to go. It was made by one of the best welder fitter and outside machines he and many work for J Ray McDermott he was one of many people that we had building the oil fields here in Harvey Louisiana bound for the Gulf of Mexico. A famous quote for Mr. Gerry LeBlanc back 75 years ago (now) they had ships made of wood and men of steel now we have ships made of steel and it's hard to find any good wood anywhere. Now they can play the hell out of video games, future drone pilots blowing up real shit all over the world thinking it's a game
@onemanandhistools9047
6 жыл бұрын
Oh my we have actually seen wesleys dad what a privilege as we know he don't like the camera great stuff
@michaelkauffman3257
6 жыл бұрын
Awesome video keep up the good work I enjoy watching you guys putting tractor back together
@Ghis1964s
6 жыл бұрын
Funny you mention that... Yesterday, after having a better look at your father (that tire shot-gun day) and seeing Cody after that, I was to comment that Cody looks a lot like your father. Almost a younger version of your Dad.
@klc317
6 жыл бұрын
"get the skid steer TIM!!"
@mischef18
6 жыл бұрын
Love the banter.
@derrellbarnhill3885
6 жыл бұрын
I like the heart shaped timing covers on that engine
@danbish5371
6 жыл бұрын
wes ive been watching your vids for a few year...since cody has been helping you on the rebuild...maybe dedicate it to your sister...idk just an idea...love the hard work you do...keep it up thanks
@brylonhanna
6 жыл бұрын
wes loving the videos rebuilding tractor always nice to learn something new i don,t no a lot about farming i want and also looked up passed video off you on how farms work so much interesting you altogether please try and do that again i could listen to all for hours
@kennycraze
6 жыл бұрын
My boss sold a similar vintage gas welder with the L head gas continental engine for $2500.00 CDN. It was a Miller, however. Those engines were used in Willy's army jeeps.
@oliverharding9761
6 жыл бұрын
I hope to see you working on that welder and I'd love to see the look on the faces of those that told you to put it in the scrap heap HA HA but good on you if you give it to your nephew your a good man and I hope both of you have a great time on your up coming holiday
@jbmbanter
6 жыл бұрын
I too thought Cody is your son. Even though he doesn't say much he fits in very well and for the most part has a good mentor in his Uncle Wes. Back in the day when I sold JD parts all references were made like you were sitting in the seat. I guess the frame rails would be the same way.
@joelmollenkopf3767
6 жыл бұрын
Excellent
@ilike2mow
6 жыл бұрын
I'm dual enrolled in the welding program at a local community college while I'm in high school.
@wiserguyer
6 жыл бұрын
Please tell him to use the particulate mask when welding , it does the eyes and the lungs .
@stanleyjones4180
6 жыл бұрын
great video all thanks
@dlmarquart
6 жыл бұрын
We had 1963 4010 and was rebuilt to 4020 pistons
@johnsweda2999
6 жыл бұрын
Very good of you give it to Cody
@This1LifeWeLive
6 жыл бұрын
If I had a dollar for every time I've heard that phrase. .... ;)
@MadlySevered
6 жыл бұрын
4:44 what that a homage to the slingshotchannel? :D:D
@nickhill258
6 жыл бұрын
Hi Wes don't drop anything down that exhaust manifold I always cover them up at this stage !
@jamesmckay9966
6 жыл бұрын
Wes, I am pretty sure that the welder is US Navy surpluse. . Jim
@mikegoodman447
6 жыл бұрын
Wes you might want to double check your pump timing. Seems IT manual is wrong on some applications. Seems Deere used several models of injection pumps on the 4010. early one with no advance and one like yours with auto advance, from what I've heard they are timed different. One thing to note and it looks like you may have caught it at the last second > rotate the engine in direction of rotation to the timing mark, THEN set the IP to line up. This takes all the slack out of the gear train. Of course double check after you get it running is always a good thing.
@thr8061
6 жыл бұрын
Cody ... good welders are hard to find these days! I know over here in the midwest, they are in high demand. Heck, some businesses actually are sending young employees to Tech Schools to learn (fully paid - as long as they work for that company for several years under contract).
@deanman6493
6 жыл бұрын
I know I've already said it but great job putting it back together
@1968IH
6 жыл бұрын
I rebuilt a continental 227 for my SAE300 Lincoln welder and if I was to start over, I would start with an engine that turns over or repower it with something else. Mine was also frozen up due to water, all six holes. I had 1800 in machine shop work by time all the components were cleaned up and the block sleeved. 2000 in parts from Montes Equipment in Chicago, a company specializing in obsolete Continental parts, another 200 in the mag, 100 in the starter, and probably at least another 500 in miscellaneous. Continentals are in a lot of different applications and with some looking you might find a better candidate to rebuild and put the welder magneto and governor on. Just some food for thought before you get in too deep on the Continental.
@buckhorncortez
6 жыл бұрын
If he's going to put the welder on a flatbed truck, you should look into doing a "short frame" conversion where you alter the height of the entire welder to get the controls lower on the face so they're easy to reach from the ground. You have to build the frame and alter the body panels, but the final result is spectacular. My local welding repair shop just finished one done in candy apple red with new chrome control plates, new gauges, engine rebuild, and retrofit with a radiator made for the short frame conversion. As you said - it's worth about $15K. The most desired SA200's are the ones with the copper windings because the copper conducts electricity better than the aluminum versions and gives a smoother arc without the need to change settings as the aluminum heats up and copper doesn't. Great welder if you're doing pipeline work. Here's a link to a welding video from a shop that does repair and conversions. Look at the profile of the last welder with the chrome panels - that's a short frame. kzitem.info/news/bejne/mWl-06Kefmqed20
@The_JEB
6 жыл бұрын
would it be possible to relocate the panel?
@NebukedNezzer
6 жыл бұрын
I have a lincwelder 225 engine driven dc welder(onan engine). Old engine driven lincoln dc welders are valuable and work great.
@darrenslatta
6 жыл бұрын
A tech channel named motherboard just did a video about computer systems in farm equipment and farmers fighting for the rights to access the tools needed to repair the machines when they break down. I recommend you all watch it. It was very interesting
@Farmingfrommyangle.
6 жыл бұрын
4620 still has 404. 466 did not come to life till 40 series. Even 4630 was still intercooled 404 like 4620. But very interchangable. Just swapped a 466 into our 4320 this fall. Worth every penny.
@cesmith4566
6 жыл бұрын
Dan Kunde I wondered if anyone would pickup on that. I had a 4520 and a 4630 bath had 404s. Did you have to stretch rails to put in 466?
@Farmingfrommyangle.
6 жыл бұрын
CE Smith nope. Just had to adjust 4 bolt front mount holes and drill out all holes to 3/4 . Other then that direct bolt up and switch oil because motor came from combine.
@westbrookfarms5059
6 жыл бұрын
The 466 was used before the 40 series it was in the 8430
@mrih1586
6 жыл бұрын
I caught it also. But God forbid you disagree with a youtuber. It's considered hate. A 466 is the same size block as the 404. Just bored more. The 4620 had and inter cooler the 4520 did not.
@Farmingfrommyangle.
6 жыл бұрын
I got no problem disagreeing with him at times. Im not insulting him, just informing him that he has misspoke, whether he just forgot or truly thought a 4620 was factory with a 466. Im on here to learn and help others learn as well. Never to old to learn new things.
@nickpopelka
6 жыл бұрын
Super tim is gonna carry the front pedestal over see what kind of gun show he can put on it's fun when your young you feel it when your older lol
@weldercastleberry1611
6 жыл бұрын
Your kinda of wright about the welder but it's a 70 model the older ones are worth the most money. They are the best welding machine out there . Can't water to see the rebuild of it . I enjoy seeing your video keep it up.
@planeiron241
6 жыл бұрын
I have used one of those Lincoln welders and they weld very smooth very good arc, most gas line welders use those I think, but anyway they weld smooth as silk
@johndeeregreen9987
6 жыл бұрын
Wes gotta hand it to you ya really knows your deeres
@ginggur17
6 жыл бұрын
Sure looks a smaller engine once it’s mated. Nice step closer.
@srvafool
6 жыл бұрын
2014? I can not believe it's been that long.
@OhNo-wf7et
6 жыл бұрын
21:54 I thought we’d was turning it over 😂
@paulbouwman229
6 жыл бұрын
The 4520 was the first tractor John Deere put a turbocharger on and made to go between the 4020 and 5020. But the 4520 was to heavy for the power it had and they had to many engine problems. So they made the 4320 which is lighter and the 4620 which is the same weight but put an intercooler to get more horsepower.
@johanneskoedood2235
6 жыл бұрын
is like the mariage a the cuppling& motor to frame of the tracktor
@jenniferwhite6089
6 жыл бұрын
I have found in the welding trade their a lot of work out them the jobs dry up I would say to have a dual ticket I am taking millwright now too them may be machinist
@alvinroundy6856
6 жыл бұрын
I was wondering about cody. he sure seams like a hard worker and is alot smaller than tim. have a great day.
@MyHMMWVaddiction
6 жыл бұрын
Wow! Did not know that, Code and Tim have your work ethic and probably your take no shit adatude . Can't wait to see it fire up.
@paulapowers118
6 жыл бұрын
I like your dad, he should be in more of your videos!
@PastPreserver
6 жыл бұрын
Looking good. 👍:)
@t.c.bowling1934
6 жыл бұрын
I asked for a pair of frame rails... they look nice, no welds!
@fergiebadass3074
6 жыл бұрын
what grade of oil will you put in this engine
@clearingbaffles
6 жыл бұрын
Wasn't it a local Welder's union out of Oklahoma that welded the Alaskan pipeline? Good money
@royo1450
6 жыл бұрын
AWESOME!!!!!!!!!!!!!!!!!!!!!!
@joshuafowlkes500
6 жыл бұрын
hey wes is cody lookong into a specific type of welding i.e. pipe welding. If he is he should check into a joining a trade union like the pipefitters union.
@wiserguyer
6 жыл бұрын
You are a young man Wes .
@mikeparker9044
6 жыл бұрын
thanks wes
@clearingbaffles
6 жыл бұрын
Unique or unic From the left coast near the Crapitol of California
@farmingforfunandprofit940
6 жыл бұрын
The only difference between a 4520 & 4620 is the intercooler..........4320 came with 18 by34 tires and the 45&46 came with 20 by 38 tires...We got a 46 with a cab...... for sale
@brandoneugenedavis8323
6 жыл бұрын
Good video man are you going to paint the tractor
@artm5294
6 жыл бұрын
Are you still going to paint that engine? If so, why did you add all the external stuff before painting.
@Blazer02LS
6 жыл бұрын
That is how those tractors were painted from the factory. Pretty much they would spray the hidden areas, then assemble the tractor and paint it. Then install things like the rims/tires, headlights, seat cushion and decals.
@justinsupczak7983
6 жыл бұрын
They want you to put it in the trash so they can dumpster dive lol
@jenniferwhite6089
6 жыл бұрын
you are saying over ranks Tim on the food chain now lol
@doogs6196
6 жыл бұрын
Gee I hope you tightened the bolt up with enough foot pounds @ 5:30 I so much enjoy watching your videos ... keep it up and dont let the knockers and youtube sway your content
@minnesotaoliveranddeere5919
6 жыл бұрын
So are you going to do the first start up live on KZitem
@d0u6s
6 жыл бұрын
"Sweet 16"... almost. 🤐
@walt1064
6 жыл бұрын
Wes looks like mom can out operate that Deere better than you. Great job on the 4010
@aaronhayden1780
6 жыл бұрын
My grandpa was fixing a tractor and he had it to the point you do right now. The owner came up and was talking to him he was looking at it and stepped up onThe jack, and he accidentally hit the lever the whole thing came crashing down and cracked the block. And he was pissed at my grandpa Evan know he broke it.
Пікірлер: 165