Unbelievable man, I loaded this engine on a truck in Australia , December 2007 , it was in our shop at Weatherill Park in Sydney . I was told that it served a monster tip truck in the mines . I never imagined that I would see it again.
@KT3406E
4 жыл бұрын
Some of the guys who rebuilt the engine in 2008 at Mt. Thorley also found the video, as well as the guy who actually pulled it out of the haul truck here in the USA in West Virginia about 2 years ago. Pretty amazing.
@dirkdiggler2507
2 жыл бұрын
Aye mate, cool stuff
@kellynkarr
2 жыл бұрын
Unreal!
@edwardhalpin7503
2 жыл бұрын
Fascinating, small world!
@tonytran4857
2 жыл бұрын
rebuilt this engine is more than buying a brand new engine stupid
@FlyByGy
5 жыл бұрын
I have no idea how I ended up here, but, "I don't wanna hear any bitchin" made me stay. You my good sir have earned a subscription.
@kargetea2977
5 жыл бұрын
Bro fucking same!
@jodamaboy
5 жыл бұрын
Me too!!!!!!
@mackankw
5 жыл бұрын
same lmao
@JAKEWJONES
5 жыл бұрын
Me too!! lol
@themarkovian152
5 жыл бұрын
Me too!!
@BrokeDown724
4 жыл бұрын
I’ve worked in open pit copper mines and the cat dealer here in Arizona and have done lots of work to these 3516s in cat 793s. I thought doing this work with another set of hands and large overhead cranes was a chore . I’m impressed you tore one of these down by yourself in your own shop. Nice work.
@kenyonworthenii7389
2 жыл бұрын
Empire gang
@harjinderkaur2384
2 жыл бұрын
@@kenyonworthenii7389 empire gang from where...?
@harjinderkaur2384
Жыл бұрын
@@kenyonworthenii7389 empire gang from BC vancouver...? Surrey..? Empire Sadler...?
@mrmadmoody
Жыл бұрын
@@harjinderkaur2384 Probably means Empire CAT, a dealership
@karozans
Жыл бұрын
Bisbee?
@davidbrooks4862
Жыл бұрын
Mister, I watched this complete video and found nothing wrong with your sound, video or expertise. My humble opinion is you are a first class mechanic! All of your presentation was spot on and easy to follow and understand! Thank You sir for 19 minutes of informative and interesting video!
@Vile-Flesh
Жыл бұрын
I 2nd this. Very interesting and informative video.
@thunderstruck1078
5 жыл бұрын
> I don't wanna hear any bitching * Immediate upvote
@jdhreiss
5 жыл бұрын
ya bet!
@mbilden
5 жыл бұрын
Exactly Right!
@100gpdriver
5 жыл бұрын
Well said !
@ryanmalin
5 жыл бұрын
Get back over to reddit with yer upvote! But yeah, I liked this video too!
@michaelmooney3369
5 жыл бұрын
I didn't see any thing to bitch about guess I missed that. jet engine mechanic.
@BB-dg1sc
5 жыл бұрын
Audio & video quality was fine. That’s a huge engine by my standards
@rarbiart
5 жыл бұрын
perhaps it's just me, but i have no reason to complain at all. no bullsh*t side action, not nasty intros or sponsor-section... if all videos on YT were like this i'd be happy the least.
@gregleithoff5943
4 жыл бұрын
I really like your style of presentation, no drama or bull, just the facts. For me its fun learning about the heavy stuff, no LS crap. Thanks ands keep it up!
@trexmidnite
4 жыл бұрын
Yeah i was wondering where the hell the chickens at.. they be nesting in and out the piston bores soon
@andrewk332
4 жыл бұрын
I have always found these large industrial engines interesting. I like how they are built with serviceability in mind unlike automotive engines that are not made with intention of ever being overhauled.
@CS_247
3 жыл бұрын
"I'm still alive and not bleeding" ... 😂
@ownedpatrol
2 жыл бұрын
It's because industrial and commercial applications are designed to make money through reliability. Automobiles are designed to make money not for the customer but for the supplier, through planned obsolescence.
@deezelfairy
2 жыл бұрын
@@ownedpatrol Bare in mind that maintenance/rebuild friendly design is reflected in the price. Cubic inch for Cubic inch industrial engines are far more expensive than automotive equivalents.
@ownedpatrol
2 жыл бұрын
@@deezelfairy It all works in the long run, you pay more initially for a product that serves for decades with regular maintenance & rebuilds, so by its design it makes its own value back in a shorter amount of time than a disposable engine. Case in point: The V6 in my 2010 Taurus was designed with an internal water pump, not covered under warranty, which floods the crankcase with coolant when it fails, essentially overheating and melting the engine in a matter of minutes, which is what happened to mine. If only it had a Cat 3406 in it, lol
@davidelliott5843
2 жыл бұрын
Fiat have been pretty good with their engines. The alternator is a chore to access but there are tricks to simplify the job. The 16 valve 1.3 diesel is a little jewel used by Suzuki, GM, Peugeot and of course Fiat. Up to 90bho isn’t bad for its size.
@camerashy44
5 жыл бұрын
For a young man, working alone in a home shop, you do an amazing job. I was thoroughly impressed with your knowledge and the professional manner in this video. The sound and video quality was more than OK. You have my admiration!
@xreconusmc3156
4 жыл бұрын
camerashy44 thank u for ya kind words. Soon I’ll be tearing down a air craft carrier engine Watch for my video coming soon
@tboniusmaximus3047
4 жыл бұрын
@@xreconusmc3156 noice, lemmie get those spent fuel rods.
@tanvirhussain6106
3 жыл бұрын
@@tboniusmaximus3047 I'm dismantling a 747 in my yard lemmi know if y'all wanna help
@tboniusmaximus3047
3 жыл бұрын
@@tanvirhussain6106 lemmie get the shell real quick i have a hole i can make a.bunker out of it quick
@tanvirhussain6106
3 жыл бұрын
@@tboniusmaximus3047Lemmi know when your bunker is ready I've got a f16 fighter jet needing major repairs.
@The_Real_Chris
5 жыл бұрын
1 cylinder has more than double the displacement of my entire 2.0 liter Jetta engine. That's insane.
@JJKHaywood
5 жыл бұрын
The John Deere Model R Tractor has huge jugs about 200 +- Cubic inches per Cylinder. They really go Thud Thud .....Thud!
@cakemanlink2852
5 жыл бұрын
are you talking the 2005-2007 tdi or the standard base model jetta?
@autopartsmonkey7992
4 жыл бұрын
i was gona ask is this right? 4 liters + per cylinder? its basicly a gallon per cylinder...thats insane.
@autopartsmonkey7992
4 жыл бұрын
@william III buying oil by the 55 gallon drum would be a new experience
@mr_n_luvs69nieman82
4 жыл бұрын
@Caliban777 the 1st small block Chevy V8 had a displacement of 265 cubic inches
@pennise
3 жыл бұрын
"Yuk, tuna. I don't eat anything that smells like that." Words to live by.
@geoffsheehan3856
3 жыл бұрын
Like a mantra for life.
@kyzor-sosay6087
3 жыл бұрын
If it taste like chicken,keep on licking,if it taste like trout,get the fuck out.😂
@nathanbrisson8515
3 жыл бұрын
@@kyzor-sosay6087if it smells like trout. Dont eat it before you smell it. You know, like how dogs do.
@adamluka7984
3 жыл бұрын
he forget that the P***y smells like that lol
@mopartron3030
3 жыл бұрын
@@adamluka7984 only dirty p***y, similar to food the good fresh stuff doesn't smell
@moose2577
3 жыл бұрын
"The video sucks and the audio sucks" The video is fine and you're probably like everyone else that thinks their own voice sounds weird... lol
@artjohnson933
3 жыл бұрын
does it matter what his voice sounds like he has a skill like no other you rebuild that engine whoever you are you sorry son of a gun this man can put this engine in anything and run it after he's done I'm a diesel mechanic myself at 32 years experience I know what this man's getting ready to go through you don't have a clue you mine was freak
@Florida_man420
3 жыл бұрын
@@artjohnson933 he said it sounds fine tf
@satan101101
3 жыл бұрын
@@Florida_man420 I think he's not understand what Chris trying to say lol
@Florida_man420
3 жыл бұрын
@@satan101101 I swear more than half the arguments on the internet are people completely misunderstanding something and then arguing pointlessly
@lexicdys2823
3 жыл бұрын
@@Florida_man420 you said my comments are pointless huh? !?
@justinjordan6567
4 жыл бұрын
I'm currently a WesTrac CAT employee. You are correct, Mt Thorley is one of our CAT branches in the Hunter Valley of NSW, which is only about an hours drive from where I live.
@HotForgeChaos
2 жыл бұрын
What are they out of? 789C hauler?
@justinjordan6567
2 жыл бұрын
@@HotForgeChaos if it's a 7TR prefix engine, yes it's out of a 789C.
@Jack-jq9wr
2 жыл бұрын
Funny enough, my local dealer is the South Guildford WesTrac branch in WA
@charleshubert6751
5 жыл бұрын
Nice direct video, no stupid music to interfere with a matter of fact description of a big engine teardown. I appreciate you letting us into your shop, thank you.
@whotknots
3 жыл бұрын
Something I learned from watching various channels covering boating. Deep sump pans are used for marine applications so engines are less likely to get starved for oil when a boat is pitching and yawing at all sorts of crazy angles in rough seas. Your video, audio and narrative are just fine by the way.
@Genius_at_Work
Жыл бұрын
Large Two Stroke Engines have Dry Sump Lubrication, like Motorcycles or Aviation Engines
@ianthompson2802
Жыл бұрын
@@Genius_at_Work but that's a 4 strke
@FIGGY65
Жыл бұрын
@@ianthompson2802. The twin 3516 marine CATs on my work boats are deep and hold approx 220 gallons of DELO each.😎.
@toma5153
5 ай бұрын
Depending on bulk price that's $1K to $2K of oil for both engines. Pricey oil change! @@FIGGY65
@xShifty41
3 жыл бұрын
“Everything about this video sucks. Watch it or don’t, I don’t care.” 😂 Love the honesty.
@fordnut4914
5 жыл бұрын
This be perfect engine for swap into a Toyota Prius
@bensmith4563
4 жыл бұрын
Just crush the thing
@fordnut4914
4 жыл бұрын
@@bensmith4563 😁
@solero7378
4 жыл бұрын
HA! More like, this would be good to swap a Prius into...
@bwill2325
4 жыл бұрын
That engine is bigger then a Prius 😂
@e39exclusiveclubpanama33
3 жыл бұрын
The prius has an engine, i thought it was a full scale rc car
@johnwolf7523
5 жыл бұрын
I love these engines, I worked at Caterpillar for 38 years. I worked at Mossville where they first built these before. they moved them to Lafayette. I ran the first 1000 hour test on the generator version of this engine. loved watching your video, took me back to when I was working.
@onemoremisfit
5 жыл бұрын
Cat retiree here, Aurora plant, not a day past 30 years, just wanted to see inside one of these.
@mwnciboo
4 жыл бұрын
Was it a good Company? Did it look after you?
@dylte1lrshrt528
4 жыл бұрын
Drove for schilli always drual everytime when I went to the distributor
@midtiertom
4 жыл бұрын
The A model 3500's were good engines. My dad worked for a dealership when they came out. Spent quite a few weekends with him working on 3512's mainly (lot of tugboats have them out this way). It was a unique childhood, wouldn't trade it for anything.
@dirkdiggler2507
2 жыл бұрын
I worked in Mossville and Aurora plants in the 2000's thru 2010's. Built all the pallet rack and shelving in those places.
@robinghunt
3 жыл бұрын
There is just something about these huge engines that is really interesting to me. The complexity and simplicity of the diesel engine is just great. You do a great job of describing what is going on, what you know, what you don't know. You have my respect, keep being you. Love the channel.
@candacemcdaniel1507
3 жыл бұрын
I am looking at our old engines around the shop & in the parts trailers with new respect. Thank you for taking the time to video all this stuff. RE video quality: I'm tired of hearing people with negative comments . I would like to see them try to post the same content. If anyone can do better, how about doing better instead of complaining. I am really looking to learn all I can. This guy makes content that I can understand. Thank you KT3406 for your time, effort & sense of humor.
@randallmercer4995
5 жыл бұрын
It's the quality of the content that counts, regardless of audio/video. You never fail to deliver awesome content. Keep 'em coming...when you have the time.
@randallmercer4995
5 жыл бұрын
@living in a desert Your question is out of context. To what do you refer?
@FOOKYOUTUBENUMBERS
5 жыл бұрын
Do you just hop on channels and say the same comment? You said the same shit word 4 word on a few of mustie1's vids change the record like a attention Seeking child.
@EngiesParadise
5 жыл бұрын
The video quality and audio quality is fine I don’t know why people would of complained.
@klutchkitchen6001
5 жыл бұрын
lmfao the intro got my like before anything . "I dont wanna hear any bitchn"
@MrAdenbittmann
3 жыл бұрын
I enjoy your channel because there is no crap, no bs, just straight up mechanics, I like your style!
@kingleonidas4296
3 жыл бұрын
Hey cool video. I’ve overhauled these 3516’s many times. All mine were natural gas though. I have a tip on getting the liners out. After removing the rod cap from the journal, get a deep wall 3/4” socket and place it between one of the webs on the crank and the bottom of the liner and rotate the crank using the crankshaft like a makeshift press. Hope it helps. Also having that engine up on its ends really had me worried. Glad nothing bad happened.
@Kill-Dozer
5 жыл бұрын
Best disclaimer ever "its on you"
@Qthefun
5 жыл бұрын
this guy owns his stuff
@iWambo
5 жыл бұрын
Damn man you did a good job with this. Especially having to stand the block up like that to push pistons. I work in a component rebuild shop specifically tearing down and buffing the parts for 3500 engines (mostly see 3516’s) I’m impressed with the way you did it.
@KT3406E
5 жыл бұрын
That's good to hear from somebody who actually knows what they're doing when it comes to 3500s.
@domenicomonteleone3055
7 ай бұрын
@@KT3406E excellent work you do hi 👋 from # YSW 🇨🇦 much respect for all of your great work on all of your videos 😊😊😊😊
@timb4655
4 жыл бұрын
Awesome engine and tear down. Big respect for the skillz and for not falling off the top of it also ! Camera and audio no problem for me. Like others have commented, refreshing no bull comments and style. Very impressive. Thanks for taking the time to film and share 👊
@Mtlmshr
3 жыл бұрын
Love the the no bull “take it or leave it attitude”!
@RadioWerwolf
5 жыл бұрын
You worked on this monster all alone? No helping hands? Man you are tough! By the way, that "no bitchin' " thing was awesome. Subscribed...
@williaml8676
4 жыл бұрын
His daddy did all the work
@SMGJohn
4 жыл бұрын
@@williaml8676 Your daddy seems to do all the work on you though.
@jwhmerica504
5 жыл бұрын
I felt right at home when you said “I don’t want to hear any bitching”. My dad said that every day of my childhood.
@calebsimth4562
4 жыл бұрын
👍🏻 all of your videos are just minty man. Thanks and keep them up. You explain every thing perfect. I could listen to you all day and not get old. I love the 3406s and c-15 6nz also and c16. Cats are just wonderful
@ticobuttowskii9396
3 жыл бұрын
The length of that crankshaft is properly mind blowing. It’s even more mind blowing that fact that there’s bigger engines than this thing.
@MrDunc77
5 жыл бұрын
"I don't wanna hear any bitchin" = immediate subscription 😂
@Chris-NZ
5 жыл бұрын
Don't knock yourself - I found this really interesting knowing nothing about truck engines and only a bit about car engines dating back to when I hauled the engine out of my Mini in 1972.
@trexmidnite
4 жыл бұрын
Did you tie it to a tree and reverse?
@dracenut8915
4 жыл бұрын
I wish i seen this a year ago but i very much appreciate your honesty. Not enough people are as remotely honest, i found this educational so in my opinion this is a great video
@metalman065
3 жыл бұрын
I stumbled on your videos a couple years ago. I loved em then, and still love em. I worked in the coal industry for 25 years in West virginia, learned that I love a cat engine over all others.. I enjoy watching you and your comments, reminds me of myself...lol Thanks for the vids brother, I appreciate all the hard work you put into making the videos along with tear downs and builds.
@SLIMETIMESFIVE
5 жыл бұрын
The truth was told immediately.. Upvote!! No bitching!!!
@John-ip4hs
5 жыл бұрын
Hi KT3406E, I'm not sure how I got to your video, but I think I was educational, never seen a diesel teardown, and plus your no bitching comment made me laugh. I like a person who speaks straight up and no BS or no sugar coating so we can be political correctness.
@meernawaz4967
3 жыл бұрын
Why would anybody dislike this it takes hell of a work even to disassemble a 4 cylinder engine
@landonbaize6898
4 жыл бұрын
When the safety man starts asking questions: "It was pretty sketchy even by my standards"
@st_us
3 жыл бұрын
He has really bad safety standards, I have been following his channel for quite sometime.
@misheckchiwasha9893
3 жыл бұрын
Hi Do you buy 3512 or Genset Caterpillar Engine contact me on +27726939455
@oliverlane4050
5 жыл бұрын
No issues with audio or video here 😀. Very interesting to watch, thank you for sharing.
@AnthonySvt_
5 жыл бұрын
This is a baby for some I’m used to working on Honda 4 bangers 😂😂
@cky2k244
3 жыл бұрын
This information is awesome. I always enjoy learning about a completely new topic than what I am used to seeing.
@paulharvey1947
Жыл бұрын
Gets a Thumbs Up just for the introduction!!
@BonkeyDong67
5 жыл бұрын
Something about the undersold narration combined with what an amazing thing we just saw was perfect. You sound so world-weary and over it, like a southern Eeyore, "Ohhh, I dunno where I'll start...maybe the sides, maybe the top...whatever" *Proceeds to produce one of the most inexplicably compelling videos on KZitem in years Like other said, no idea how I ended up here, but subbed
@ejcross8713
5 жыл бұрын
"I don't eat anything that smell like that"😂😂😂😂😂😂
@jakobmaxwell7986
5 жыл бұрын
Ej Cross this video deserves a like just for that.
@ejcross8713
5 жыл бұрын
Sure do lol
@Spale80
5 жыл бұрын
Plenty of fish in the sea, still i'm alone holding my rod. Besides, it's not just the smell i yearn...
@ChuckBeefOG
5 жыл бұрын
Tuna is pretty awesome though. Get the chunked stuff, mix that shit up with mayo and onion, top it with cheese on rye bread and throw it in the toaster oven.
@T1G3R009
5 жыл бұрын
Spale80 gets it
@jakemandery
4 жыл бұрын
Wow that is a massive motor good job man wish I had that Knowledge of a Diesel mechanic I would love to learn
@kobusdutoitbosman6240
4 жыл бұрын
Just great to see a professional dealing with a motor, machine like its alive, which to most guyz interested in ‘running stuff’, it is! And, your running comments are well presented. By just listening, and looking through your camera eye, one learns stacks...which is a great, continuous joie. So, thank you kindly. A striking and very constructive show.Well done. Keep it up and remain inspired. Beste from the Fairest Cape, the Cape of Good Hope, in ZA!
@rickallen6378
5 жыл бұрын
I'm not mechanical, but for some reason I watch these videos and I think that I might be able to do this. I think that one of the great things about videos like this is that you get to see something that you would ordinarily never have access to. The audio and video were just fine. No bitching here.
@Bennyboy46a
5 жыл бұрын
you just take bolts out until the broken bits come out then you put them back in! looks challenging but its just bolts! get a junk lawnmower engine and take it apart. this i just bigger with a few extra bits, you may find yourself a new hobby.
@rickallen6378
5 жыл бұрын
@@Bennyboy46a I'll see if I can't find one of these and take a crack at it.
@johndowe7003
5 жыл бұрын
@@Bennyboy46a it aint that easy hahaha sometimes the smallest jobs take the longest and are the most infuriating. always happens other than that its fun working on that stuff if ya got the patience for it and the mindset to do things correct.
@bigrockets
5 жыл бұрын
theres a hell of a lot more to this video than meets the eye. just because our friend here made this look simple doesn't mean it is. If you think you could tackle a job like this because you watched a video on it you have a real wake up call coming.
@Bennyboy46a
5 жыл бұрын
@@johndowe7003 Well, ive been in the heavy equipment repair game for 15 years now, ive worked on lawnmower engines up to 3524 cats, and its all just bolts to me! My first engine job was a 2 cylinder starting engine off a D8H cat dozer. principles are the same in all of them.
@kichtdicky8441
5 жыл бұрын
"Before this starts i wanted to take the time to tell everybody that this video is not very good" **liked**
@Runndeep
3 жыл бұрын
You know I don't even have a cat in my truck (Detroit) but your so informative and interesting I start watching and cant seem to stop. Appreciate the knowledge, keep up the great work
@kevinlwiltfong7941
Жыл бұрын
I found your video and audio quality to be very good. Thanks for taking the time on this one. Very interesting.
@jeepinjohnny2898
5 жыл бұрын
hey - neat video. thanks for NO background racket (music).
@usualsuspectsgaming2204
5 жыл бұрын
love the lack of music, but faint howls of a freight train. Reminds me of workin in the garage at my desert compound.
@nozzlehead8496
5 жыл бұрын
“I don’t want to hear any bitchin.” The eleventh commandment
@RickyWeisheit
3 жыл бұрын
Your the type of guy I could see drinking a beer or two with and learning a thing or two. Good quality stuff.
@bassmith448bassist5
3 жыл бұрын
I liked the video before I even watched it. I like your deadpan narration and your technical expertise.
@davidfox2611
5 жыл бұрын
Greetings from Australia. Wow your work ethic is amazing. Mount Thorley is a coal mining operation in NSW Australia and WesTrac is one of the Australian CAT dealers who specialise in Mining.
@jamesbeukers581
5 жыл бұрын
It's across the road from my workshop haha
@joshg6et98
5 жыл бұрын
Westrac has a shop right at the south gate of the Mt Thorley mine.
@dermotmckee1418
5 жыл бұрын
What great start to a video. I dont wanna hear no bitching. Instantly subscribed lol
@keeganmurphrey2169
5 жыл бұрын
Saaaaame XD
@tactickleshtooper1753
4 жыл бұрын
You call this a "little engine" ... but anything that's bigger than a BBC is big for me! This is far beyond what would work as an engine-swap for the typical pickup truck. Highly entertaining and informative, ... many thanks for the shares! ;-)
@johnbowen2963
4 жыл бұрын
I REALY ENJOYED THIS, WAS GOOD TO SEE THIS ENGINE PULLED DOWN, CHEERS MAN
@skeetersaurus6249
5 жыл бұрын
Who got to 21:00, and imagined the pouring / casting and original machine work on making that block?!
@jaylestingi5418
5 жыл бұрын
Skeeter Saurus Man that is funny you said that! After he showed the insides of the block with the liners removed, I thought to myself "Just look at the absolute quality and consistency of that cast iron casting, simply incredible" THAT is the ingenuity and quality control of the USA at its finest!
@heinzkot360
5 жыл бұрын
i literally thought the same when watching and afterwords red your comment :D
@stevemitchell2252
5 жыл бұрын
I always appreciate the craftsmanship that goes into these type of machinery... that is something that the Hollywood type pansies will never know or appreciate like us gearheads....
@thetim8833
5 жыл бұрын
Actually I am a buyer for CAT and it so happens that one foundry is about 15 minutes away from where I live. When they pour for engines they actually pull away electricity from the surrounding town. Its incredible to watch and there is a viewing section for people.
@SlidewaysMotion
5 жыл бұрын
Someone else in the comments mentioned that they were working in the foundry for this engine haha His username is "Travis Smith"
@ntcrwler
4 жыл бұрын
This is seriously amazing to watch. I would love to come by on weekends and offer an extra pair of hands in return for apprentice experience with something like this
@haydencarlson2861
3 жыл бұрын
Same
@SubnormalSwine
3 жыл бұрын
The second you said "i dont wana hear any bitching". That sold me. Subscribed forsure haha
@Carsandtrucks33
4 жыл бұрын
I learn something new every time I watch your vids I have mostly hands on self taught exp with truck engine I grew up turning wrenchs on my fathers trucks he had 6 drivers at one time I was no stop fixing the trucks from 10 years old threw my 21st b-day he got rid of the drivers and I got into Towing and recovery and drive for someone, the diesels are always in my blood so my project car is a turbodiesel merc benz,, it being a 94 has zero electronics on it so playing with it keeps me satisfied at the moment.. just a little background...but please keep up the vids the details you cover are one of the best things about your stuff man...
@oldkid8811
5 жыл бұрын
notice the quad turbo too. what a beast of an engine.
@mfarrachi
4 жыл бұрын
“ You really haven’t missed much, just a bunch of cussing and raising hell.” That’s the shit I want to see!!!🤣👍🏻🇺🇸🤙🏻
@mrwdpkr5851
3 жыл бұрын
Yep ! Edited out the "good" part .
@HotWheelsBurban
Жыл бұрын
You really get a sense of how huge this engine is, with the ladder next to it! That engine complete, looks bigger than my truck,1997 Chevy 1 ton crew cab long bed is a big un!
@floydhenderson9441
Жыл бұрын
I test these big bois at the Mossville tech center. That's about all I can say but the 3500 platform is probably my favorite engine platform. C280/3600 is pretty fun too but 3500's just keep proving themselves time and time again.
@Visionery1
5 жыл бұрын
Not something one drops in the back of a pickup to take down to the machine shop. :) Great job!
@carminking9315
5 жыл бұрын
Man I'm glad I stop and look at this video in my newsfeed! I always been interested in big diesel engines and wonder how they work. Great job! I'm subscribing, you just got right to the point no sugar coating at all!
@Alanthe918mobilemechanic
2 жыл бұрын
It neat seeing the way other people work on stuff some would say don’t do this or do that like this I may do things a tad different but I like the way you work you do us diesel techs proud I’ve seen some other diesel repair channels who absolutely suck and they know it yet they talk and act like senior guys when they are barley doin stuff right
@MM-fq9gi
3 жыл бұрын
Had 3 of these 3516 engines, coupled to generators for ship propulsion, they worked good.
@stewartlawson4089
4 жыл бұрын
I love the occasional railway horns blaring in the background 👍
@aj-kwt909truckin31
4 жыл бұрын
Stewart Lawson ~ Missouri Railroad 🚉🚉🚉🚉🚉🚉🚉🚉 🚞🚞🚞🚞🚞
@letsgobrandon5622
4 жыл бұрын
@@aj-kwt909truckin31 yep I hear it every night lol .
@CalletaMoth
5 жыл бұрын
I love watching engine tear down videos, and this was no let down. I loved your straightforward approach and lack of background music. And the audio and video was really good, btw. This is how you make a good video.
@MartinTeerly
4 жыл бұрын
Grate job. I'm also a mechanic but I never got to the point where I could rebuild such big engines. I envy you
@beozzie690
3 жыл бұрын
Interesting to see this unit.. thanks for putting it on
@wraithette01
5 жыл бұрын
Great no nonsense commentary and clear, straightforward video. Thank you for taking the time to put this together and sharing sir!
@boomerdave645
5 жыл бұрын
I've only been in gas engines and that just made my old back hurt. Good job young man and the vid and audio was just fine. Rock on.
@eddieweigel9490
2 жыл бұрын
Great video enjoy watching you straight forward you remind me of my uncle John he’s also a diesel doctor works on a truck farm in Arizona he gets the big stuff occasionally that’s a huge Cat engine they use 3515 on pusher tugs
@riedjacobsen8620
2 жыл бұрын
Nice tour of the Cat 3516.
@jeffryblackmon4846
5 жыл бұрын
That is one HUGE ENGINE. Thanks for bringing us into the shop to see it come apart.
@TheTheomax
5 жыл бұрын
That was really cool to see something like this. Thank you for taking the time to do so. The biggest engine I ever worked on was the 7.5L in my 94 F250. Now my new hobby is the LS motor in my G8. Have a good day..
@mystuff8987
Жыл бұрын
I thought the video and audio was fine. I look forward to seeing more of your content. Thank you for taking the time to share this with us.
@truckinfam2207
5 ай бұрын
Heck of a job.Well presented. I can’t work on them like you can but I sure can run them. Been a CAT man since 78 and had about everyone over the years. You remind me of the great wizard I knew in southern Ohio who worked on my 3408 ‘s back in the day. Same kind of laid back attitude & humble and he sure could make them fly. Never Late V-8. Thanks for the great videos.
@robertbarnes7871
5 жыл бұрын
Exactly what I like ,,, straight to the point ,, don’t like how I do it ,, don’t watch and shut the hell up... Thumbs Up and subscribed ... Great Job ....thanks for sharing....
@eighthof8
5 жыл бұрын
No bitching - thanks for uploading the vid!
@brettking3092
4 жыл бұрын
Awesome, Been watching you for a while. I'm really not a Cat guy have worked on a bunch of all brands.Used to have my own shop a few years ago. Did a few 12 and 16 cyl DDA's thats about all I can compare this beast to. Keep up the good work and be Safe!
@owenjaeckle8542
Ай бұрын
We build these engines in Lafayette IN, specifically my unit focuses on the marine applications for the 3500 series for tugs, yachts, etc. The 3500 is huge, but the 3600 is an entirely different beast. It takes so many men and women to build one of these, so it's impressive that you tore it down yourself. Great video.
@flipzhat
4 жыл бұрын
As a motorcycle mechanic it is amazing watching you to work on these giant diesel motors (i thought my 7.3 idi was a big motor to work on) From one wrench to another keep up the good work i look forward to the rest of your videos 👍👍
@thedolphin5428
5 жыл бұрын
"... I might just start on top and go down ..." is what most guys do, so that sounds like a fine plan to me.
@prevost8686
4 жыл бұрын
Except for those times you give her a good toe-job first....
@nathans1829
3 жыл бұрын
@@prevost8686 💀
@dadillen5902
3 жыл бұрын
@@prevost8686 There a tune joke in there somewhere.
@gradysullivan1248
3 жыл бұрын
I like your style! Direct and str8 forward! Keep up the good work!
@TuffBurnOutTeam
3 жыл бұрын
Massive amount of work For one man to do I take my hat of to you mate For taking on such a huge project Australia 🌏
@g0fvt
5 жыл бұрын
It is fascinating to see the sheer scale of these engines, your videos are great, thank you
@alherch
5 жыл бұрын
Audio, Video, and Content are all quality man. Keep up the good work
@oldtimehockey7123
2 жыл бұрын
Love the vids. This is a whole new world for me. Thanks.
@brandonlang9322
4 жыл бұрын
The best part of being a mechanic is the cussing. I only pull motors and scrap the rest of the vehicle so when I'm frustrated or get cut/hurt I get to break things until I feel better.
@ingenfestbrems
5 жыл бұрын
Speed up 50%, and he sounds more enthusiastic
@wimwannes2662
5 жыл бұрын
thank you! sounds more normal now..
@johncoops6897
5 жыл бұрын
I think the guy is taking too many meds to relieve the stress of making these videos.
@scottcupp8129
5 жыл бұрын
Your videos are great man, I watched it thoroughly
@christianebelanger5290
5 жыл бұрын
Scott Cup
@scottcupp8129
5 жыл бұрын
@@christianebelanger5290 Yes?
@joeestes8114
5 жыл бұрын
Great video! I appreciate you posting them! Thanks!
@chestereckler7491
4 жыл бұрын
I really respect the knowledge and the work you do
@kenellis8353
Жыл бұрын
Man, KT3406, you had me cracking up when you were showing the top of the CAT and made the statement about it being a hell of a fall off it!!! You tell it like it is, don’t ya??!!! Lol!!! That’s what I like about watching your videos, and the fact that your videos are very informative!! I’m a company truck driver, myself, and can do a few things but I’m not a mechanic, by no means!!! However, your videos give me a better understanding on how everything works and what I can check, if something goes wrong. Please, keep doing what you’re doing and I’ll watch your videos!!! Stay safe, man!!
Пікірлер: 3,1 М.