I might look ok but deep down I'm dying for a truck like this. Well done guys
@tre5customs113
Жыл бұрын
😂😂😂
@777Bviews
Жыл бұрын
I remember running across this channel when this video dropped and I'm happy that I found it again. This is my dream truck build.
@tre5customs113
Жыл бұрын
Subscribe and click the notification bell… that way you don’t lose us again!
@patrickspaceman305
20 күн бұрын
Absolute beast. It's glorious, well done.
@tre5customs113
20 күн бұрын
🙌🙌
@randybock82
Жыл бұрын
So glad you didn't put the shiny stuff on it.Its already perfect! That hood is 70 years of patina art! Better than a new Ferrari.
@tre5customs113
Жыл бұрын
🤙🤙
@raymondteague9258
Жыл бұрын
One sweet ride and very inspirational but just so everyone knows that the cab obviously has the provision for a in cab gas tank and 1947-48 Chevrolet & GMC trucks didn’t have that their gas tanks were mounted off the frame under the bed.
@tre5customs113
Жыл бұрын
These trucks are full of little quirks and we’re always scabbed together.
@adventuresofhess1058
3 жыл бұрын
That opening shot was sick!
@Will_my65gmc
3 жыл бұрын
Such a cool truck. All the right stuff done in the right places. Great job Tre5!
@funkybee11
13 күн бұрын
Loved that you didn’t paint it!
@tre5customs113
11 күн бұрын
🙌🙌
@scottkoch2558
3 жыл бұрын
Daaayyyuuum...!!!!!! I think I found a new love... AWESOME ..... absolutely awesome..!!!!!!
@barrymonroy7138
3 жыл бұрын
You knocked it out the park brother..
@23Rrhmj
3 жыл бұрын
I love that whine. Wow. The exhaust is bad ass as well
@ODGColornChrome
3 жыл бұрын
Normally I don't care for patina, but that truck is bad ass! Well done!
@DRGUANE
3 жыл бұрын
😉love it!😱 great work keeping it flat, low key...🤣 until u hear that whine 😆. You guys make some sick stuff. 👌🙏👏👏👏
@tonyrodriguez_
Жыл бұрын
Bro that’s one of the sickest trucks I’ve ever seen, inside and out
@tre5customs113
Жыл бұрын
Thanks!
@rondingo2347
3 жыл бұрын
Nice truck. I've got my 48' that i've made my own. Your truck is inspirational.
@gatorsbigbassguideservices2680
Жыл бұрын
OH MY This truck is bad ass. Super sweet build.
@tre5customs113
Жыл бұрын
Thanks!
@MikeForsythe
3 жыл бұрын
Those ADV.1 wheels tho! This looked like a fun build!
@RLeeJones
2 жыл бұрын
This is pretty much what I want my ‘52 Chevy Truck to be. 💯🔥💯🔥
@ADV1WHEELS
3 жыл бұрын
Loving this build!
@frankm8533
3 жыл бұрын
Man that's nice! I've been into truck anything since the early 90s when I was teen, the stuff that comes out these days is unreal. Love Tre5 builds
@ahlgren1231
2 жыл бұрын
OMFNG!!!! THAT SOUNDS FREAKING INCREDIBLE AND LOOKS AMAZING, GREAT JOB!!
@tre5customs113
2 жыл бұрын
🤙🤙
@DavidHuber63
10 ай бұрын
Key word being, quick
@ericbryant7237
3 жыл бұрын
Dude you guys make some amazing stuff man. This one just makes me happy. I got a 47 that I wanna do up similar to that style if I ever get done with my Camaro. Just love it. Great job.
@stepside91
3 жыл бұрын
Nice 5 window 😍 I would kill for this truck😏
@chrisb3017
3 жыл бұрын
Perfect truck fast and rusty!
@HotRodDad
Жыл бұрын
Looks and SOUNDS great!!! Love the painted trim.
@tre5customs113
Жыл бұрын
🤙🤙
@titogification
3 жыл бұрын
So sick! I love the exhaust setup!
@turbogrin
3 жыл бұрын
Nice work guys and thanks for sharing this sweet ride
@HoldfastHD
2 жыл бұрын
Loved the truck. Such a sick ride. Stay rad🤙🏽
@93gunnz82
3 жыл бұрын
Such a beautiful thing. Thanx fer the share.
@ryansangren1325
2 жыл бұрын
Nasty truck, gives me more inspiration for my ‘54 😩
@CheeHooGarage
3 жыл бұрын
Fkn sick truck!
@electricguysvcs
3 жыл бұрын
I've got a 55 1st series in the works now. Good idea with the old gas cap area with that bottle opener
@sumaklosrembert7288
3 жыл бұрын
At last!!!! Love it!!!
@MachineHeadDissent
3 жыл бұрын
Incredible!!!...🤙😎🤘
@coolmarine1983
Жыл бұрын
i really love the way the truck looks good job
@tre5customs113
Жыл бұрын
Thanks
@tonyharlow630
Жыл бұрын
Love this truck, wish I owned it!!
@tre5customs113
Жыл бұрын
It’s only money
@zackhall8229
3 жыл бұрын
this truck is ridiculous. well done!
@TheIncredibleHoosier
7 ай бұрын
This is a awesome project! 🔥🔥🔥
@tre5customs113
7 ай бұрын
🙏🙏
@boneal4942
Жыл бұрын
Awesome build 👍
@tre5customs113
Жыл бұрын
Thanks
@HutchsWelding
Жыл бұрын
fucking manual and boost, right up my alley
@tre5customs113
Жыл бұрын
It’s a blast to drive!
@HutchsWelding
Жыл бұрын
@@tre5customs113 I can't wait to go for a ride!
@LegendaryWoke
Жыл бұрын
Beautiful!
@tre5customs113
Жыл бұрын
🙏🙏
@leemiller8542
2 жыл бұрын
Very cool,love the supercharger
@tre5customs113
Жыл бұрын
🤙🤙
@rafatrill
3 жыл бұрын
Badass truck
@johnhawkins467
2 жыл бұрын
That's sick! love it
@justtryn12
3 жыл бұрын
WOW!!!!!! NICE!!!!!!!! 👍
@elpadrino9504
3 жыл бұрын
Wao factor all the way
@zulubuzz8516
2 жыл бұрын
The only thing I don't like on that truck is the supper charger whine, and only because I would want to keep as a sleeper!!
@richie4776
Жыл бұрын
Fuckin ayyyy bud!!! I digg it!!!
@tre5customs113
Жыл бұрын
🙏🙏
@gerson1862
2 жыл бұрын
Loved it 🇧🇷
@luzgarcia9499
Жыл бұрын
Very nice trk sir super charged dam
@tre5customs113
Жыл бұрын
🙏🙏
@luzgarcia9499
Жыл бұрын
What does a motor and transmission set up like that cost.do u do that set up all the time.
@luzgarcia9499
Жыл бұрын
The reason being i have a 50.gmc that i want to see what type of busget one has to have to get one built . Just curious
@CarswithJDUB
3 жыл бұрын
Nice!
@CS-rx2gx
3 жыл бұрын
Great build! Not sure about it being a 47 tho. In 47 and 48 the gas filler wasn't on the cab.
@caitlingonzalez8633
3 жыл бұрын
Definitely a 50s, the vent between the door and hood weren't slits in the 40s, they were little doors that you could open from inside. Also it could be a 52-53 cause there is not exterior key hole, newer ones had put the hole on the handle itself but I'm not sure with this one cause there's neither
@CS-rx2gx
3 жыл бұрын
@@caitlingonzalez8633 I have a 48. It has the louvred (slits) on the passenger side and the vent door on the driver’s side. This is probably a 49 or 50. 51 forward had wing vent windows and 52 - 55 had push button door handles.
@caitlingonzalez8633
3 жыл бұрын
@@CS-rx2gx my bad yes, I meant to say since the driver side no longer has a vent door it would be a 51 or 52-53, probably a 52 or 53 just with different handles since it doesn't seem like they did any fabrication to cover the key slot under the handle if it was a 51
@tre5customs113
3 жыл бұрын
We shaved the key hole on the pass side, look real close. No vent windows and no push button door handles... so not a 52 or 53.
@tre5customs113
3 жыл бұрын
Look closer 😉 we did weld up the key hole on the pass side.
@michaeldonaldson2387
3 жыл бұрын
Love it!
@rawdyrider
2 жыл бұрын
Fantastico!!!
@moisesvazquezcholico8501
3 жыл бұрын
Freaking nice!!
@Mike.restelli
Жыл бұрын
I need this!
@tre5customs113
Жыл бұрын
Let’s do it
@reckless5085
3 жыл бұрын
That's shit bad ass
@fjbowen3155
3 жыл бұрын
"NICE" ride!!!
@ryanmoeller3308
3 жыл бұрын
Are you guy's gonna have a show with some of the builds you've done this year? I'm in Yuma and I'd love to come see your AMAZING builds! 👍👍
@tre5customs113
3 жыл бұрын
We will be at LST next month!
@ryanmoeller3308
3 жыл бұрын
@@tre5customs113 Where is LST at and where can I find information on it? Thanks!!
@tre5customs113
3 жыл бұрын
@@ryanmoeller3308 it’s in Conroe, TX. www.lonestarthrowdown.com
@ryanmoeller3308
3 жыл бұрын
@@tre5customs113 Yeah.. That's 19hrs from here.. LOL.. Any shows here in Arizona?
@tre5customs113
3 жыл бұрын
@@ryanmoeller3308 possibly good guys Scottsdale in April. For sure the Pro Touring Truck Shootout in April at wild horse pass.
@paul5961
Ай бұрын
100% class
@tre5customs113
Ай бұрын
🙌🙌
@Mrtunechi86
2 жыл бұрын
What custom steering column did you end up using? God this is so nice. Love the engine and everything
@tre5customs113
2 жыл бұрын
It’s either an Ididit or Flaming River. Those are the only ones we use.
@spesh1300
9 күн бұрын
This … ya no words for this one . 🙌🏻🙌🏻🙌🏻. Question tho . Is there a rule of thumb for how much clearance you need for inner fender to face of rim ? . I’m trying to sort it out for my truck it’s on CB chassis with slam specialties and a ford 9” but not sure if the average housing is 60” or 58” with 20x9 4.5 backspace … a 62” housing puts me at 73.5 which is exactly what the truck is fender to fender … so if I went a 60” it gives me 1” clearance is that standard ? I’ve never had one on bags .. bad apple appears to have more then an inch so I’m thinking 58” housing puts me at 69 1/2” overall Any suggestions ! You guys are the kings of truck builds 👑
@tre5customs113
5 күн бұрын
Short and sweet answer… depends on how low you want to turn and how much? Benefits to being sucked in further is you can turn lower… but some people don’t like the look. So it’s whatever you’re comfortable with… and not so far in that it’s going to rub on anything on the chassis.
@spesh1300
5 күн бұрын
@@tre5customs113 makes sense i know I want it not too far in but not maxed so I went with the 58” housing gives me 1.75” clearance on the rear and I mocked my front up it gives me 2” clearance face of tire to inner fender well . My 51 has always been stock so with the CB chassis it’s my first go .. I guess I’ll soon find out 1/4 done the build . Thanks for your help ! I’m in AZ a few times a year would love to see your shop . I’ll make sure to buy some merch tho haha 👍🏻 thanks for the help
@mt186
Жыл бұрын
Truck is sick! I'm building a 65 and relocated the tank to rear, how do you get the exhaust to exit out the back like this truck when it's that low? Under the axle?
@tre5customs113
Жыл бұрын
Over or under, whatever there’s room for. The gas tank on this one isn’t at the rear.
@doniellerice6794
Жыл бұрын
I love you Dad
@tre5customs113
Жыл бұрын
Thanks Jacob!🙌🙌
@jyehey
3 жыл бұрын
unreal job fellas...what power does it make ?
@tre5customs113
3 жыл бұрын
Never put it on a Dyno for tuning, but we’re thinking it should be around 700 chp
@danielattias1525
Жыл бұрын
Hey buddy, what wheels are you using on your truck I like them for my 52 Chevy, they look great. Best Regards Daniel
@tre5customs113
Жыл бұрын
These are from ADV.1
@adamschewe7166
3 жыл бұрын
My dream truck! Man you guys killed it. What are you running for air suspension?
@tre5customs113
3 жыл бұрын
Accuair
@BogDustForBreakfast
Жыл бұрын
Love it
@tre5customs113
Жыл бұрын
So do we!
@twistedc10
3 жыл бұрын
🔥🔥
@danielkalva8210
3 жыл бұрын
What type of model is it for the AC button on the dashboard because I want to add it to my truck just like you guys did.
@tre5customs113
2 жыл бұрын
Restomod air
@fjbowen3155
3 жыл бұрын
Did u say dash was "wrapped"? Curious...like the flat black look!
@tre5customs113
3 жыл бұрын
Yeah, but wrapped in leather.
@Rhino-ux7yf
3 жыл бұрын
Shit is bonkers 🔥🔥🔥🥃🥃🥃
@danilo515
2 жыл бұрын
beautiful. Are these wheels 20" or 22"?
@tre5customs113
2 жыл бұрын
20”
@davidbrown-55
2 жыл бұрын
Saaaaaaweeeeeet!
@georgepavich8266
8 ай бұрын
Sounds great but nothing sounds like a 235 with split pipes right
@ratsrodsgarage461
2 жыл бұрын
Bad azz!!!
@Bearded_Gunsman
Жыл бұрын
Which make and model wheel are on this beast?
@tre5customs113
Жыл бұрын
Adv.1
@cesarperez982
3 жыл бұрын
CRAZY!!! My Father N Law just picked up a 48 3100 - he’s STOKED!!! Any shops in the West Coast you recommend? TIA!
@brhusewayne2217
3 жыл бұрын
WestCoastEngines!
@tre5customs113
3 жыл бұрын
Yes, us. We’re in AZ
@rickyglendening4185
Жыл бұрын
How much would this particular truck be worth as it is now?
@tre5customs113
Жыл бұрын
About $200k
@jimpenas6525
Жыл бұрын
Its so hard to get. A car or truck To say this is my own
@tre5customs113
Жыл бұрын
🤷♂️
@ozcorr909
Жыл бұрын
Acuair prone to problems? He seemed surprised when he said it still working perfectly
@tre5customs113
Жыл бұрын
They used to be, only with the CVT setup. They’ve gotten rid of that product.
Пікірлер: 178