Great video and info. In my case, i bought a new pump cover for a 05 Trailblazer with LL8 engine in mind and the one I received was for an LS version. The covers are not same. Pretty much, the 05 LL8 4l60e cover is an old model front cover with the good stuff of the new cover (TCC valve, springs, etc) that was being engineered for the speed sensor. I just wanted to throw that there because those 05 covers for the LS come with stator and sleeve for speed sensor but not drilled and have the notch in the boost valve. For anyone repairing a 05 trailblazer or Saab SUV of same year with the LL8 engine, it takes the old 300mm input shaft as you mention on your vid. Thanks for the info. Ignore the tech trolls 😂. They don't deserve to be addressed.
@xpsgarage
Ай бұрын
Good information. Thanks!
@vaahtis1
Жыл бұрын
you know there is a 3mm height difference in pump bodies also, that about an ants lenght for you drunken lobster measurement users. Should be pure logic there's also shorter and longer shaft
@philw3953
4 ай бұрын
Thank god you made this video. Thank you. I desperately was looking for this info.
@sempergumby8734
6 ай бұрын
I done this once and my truck wasn't happy with it
@xpsgarage
6 ай бұрын
I bet it wasn't LOL.
@nobudy5559
3 ай бұрын
Thank you so much. This was my problem
@xpsgarage
3 ай бұрын
You are very welcome. I was hoping it would help some people out.
@clayallison3584
Жыл бұрын
I just took 4 trannys and built 1
@bigstuff52
8 ай бұрын
Very interesting..Thanks for sharing your knowledge..I didn't know this..
@xpsgarage
8 ай бұрын
You are welcome.
@raymond82807
8 ай бұрын
Very interesting video and above all very useful for all those who rebuild transmissions. Thanks!
@benjaminhamm6115
7 ай бұрын
Thank you and this is why I came to KZitem. Thank you sir. I have a 2005 Chevy trailblazer 4x4 lost all gears drop tranny changed torque converter put it back up go to change the filter and a vein from the pump was in it. So now dropping it again to change pump. I need to know if 2005 trailblazer needs pump with sensor or not now thanks to you. I can figure which one I need now so Thank you my friend. My wife's truck and 5 kids have to get it back on road . Appreciate you
@xpsgarage
7 ай бұрын
Welcome. Good luck getting it back going.
@wadedavis9344
4 ай бұрын
So the new style pump will work in the older style without the ISS?
@xpsgarage
4 ай бұрын
Yes as long as you use the new style input shaft with the new style pump.
@wadedavis9344
4 ай бұрын
@@xpsgarage thank you. I had no idea and built a beefy 4l60 only to find out I needed the iss
@xpsgarage
4 ай бұрын
@@wadedavis9344 Ok, If you need the ISS there is something else to watch for. In the newer style pump I had the hole for the ISS was blocked off and this is because GM was transitioning parts getting ready for the ISS but didn't actually use it in this pump so that's why the hole was plugged. The shaft I had in the video for the newer pump was spaced out for the ISS pump but they did not add the reluctor grooves to the shaft so if you added a sensor to the pump there wouldn't be anything to trigger the sensor. This link has some good information and pics of the reluctor section. www.transtar1.com/TranstarIndustries/media/Transtar1/technical/bulletins/TLT-P774-001.pdf The speed sensor was added so GM could constantly slip the converter clutch to mask the transition from 4 to 8 cylinders that Displacement On Demand causes. If you have disabled DOD like a lot of people do then you technically don't need the ISS and could program it out with HPTuners.
@jerrymorgan2769
Жыл бұрын
Shouldn't alter...year make and models therefore if you do make sure details are the same... Don't be surprised if remove go thru a transmission several times. Don't just jump on a Facebook and ask 100 questions upon your failure
@xpsgarage
Жыл бұрын
Trans is working great and I don't go to Facebook for help. I figure it out myself.
@leonardlawson4354
2 жыл бұрын
Thank you for that info did not know that
@xpsgarage
2 жыл бұрын
Glad to help. I actually found a video from Precision Transmission that talked about the same issue. Too bad I didn't find it sooner!
@TheMasterofsparks
Жыл бұрын
This video just saved my ass , I have 2 transmissions and was about to install the smooth shaft into the pump with the plug. Thank you!
@xpsgarage
Жыл бұрын
Good deal! I'm happy you didn't make that mistake because it sucks!
@jerrymorgan2769
Жыл бұрын
3/8 Milwaukee broke my....Arm
@treybadd
9 ай бұрын
This got me. Builder swapped my new style case and pump in an old setup and reused shaft.
@xpsgarage
8 ай бұрын
Oh not good!
@randy1ization
Жыл бұрын
do u have a pump for a 93/94 I need one than ks
@xpsgarage
Жыл бұрын
Sorry I don't. All my spare parts are later model.
@ALCHEMIST5288
10 ай бұрын
Great information to know
@xpsgarage
10 ай бұрын
I know right. Too bad I found out the hard way LOL.
@mikecox4119
Жыл бұрын
Ive got a 98 Silverado pump I'm trying to put in my 2000 should be the same, using same TC it wouldn't seat, so I tried the 98 TC still no seat and it's wobbly (298mm vs 300mm)
@mikecox4119
Жыл бұрын
So I think it's the sleeve right? So I swap the sleeves and it still doesn't seat in TC. can you crush a TC? I had to rebuild the pump due to me crushing it while trying to install it unseated.
@jerrymorgan2769
Жыл бұрын
Need....salvage yard .....parts
@jerrymorgan2769
Жыл бұрын
3/8 Milwaukee broke my.....Arm
@flierbill
Жыл бұрын
I hope my Transmission guy knows this!
@xpsgarage
Жыл бұрын
I bet he does if he rebuilds them for a living. This was my first automatic rebuild and I was putting it together out of 3 junk transmission.
@flierbill
Жыл бұрын
@@xpsgarage yeah, Pro Shift company name. So I should be good.
@erickenner4847
2 жыл бұрын
Excellent information, I worked for a rebuilder 6 years ago for 6 months had an accident and was paralyzed, decided to get back into rebuilding due to several friends needing transmission rebuilds and have been refreshing my thoughts and learning more from people just like you, thank you for your help
@jerrymorgan2769
Жыл бұрын
Am a Retired Machinist... established a family owned and operated company 1975 still active today but not good as past years far as operational
@jerrymorgan2769
Жыл бұрын
M-30s keep me with a bit of technology in my life as I enter 60 years of age...And a 1995 k 1500 in my garage that was once in critical condition keeps everyone else out of my Garage as am in hurry to complete bringing it out of critical condition....I thought of that today since it's been in my garage a few years....I said to myself ....well at least it keeps everyone else out of my Garage
@jerrymorgan2769
Жыл бұрын
Well see...ya hav Altered parts...that the engineers development and ya got a cross breed....so ur not paying attention to details...
@xpsgarage
Жыл бұрын
Yes, I did miss that detail but I figured it out.
@skutahuniai4830
Жыл бұрын
@@xpsgarage Tell this Jerry guy to FO. He is on all the trans channels shit talking with his hillbilly grammar.
@xpsgarage
Жыл бұрын
@@skutahuniai4830 LOL he's not bothering me. Some people just have to troll.
@IndenturedSavant13
Жыл бұрын
@skutahuniai if you knew anything about 4L60e transmissions you would know that in order to make them last you need to use later redesigned parts that are more durable. Just have to triple check the specs to ensure proper operation.
@skutahuniai4830
Жыл бұрын
@@IndenturedSavant13 You must be a hillbilly too. Your comment to me makes no fkn sense. Exactly what are you saying?
Пікірлер: 52