I was fifteen and using a corded circular saw in the garage when I learned a good lesson: Be mindful of your cord. I cut through the cord and after a bright flash, the lights went out. It scared me so badly I dropped the saw. I found myself in the dark with a runaway saw as the blade was slowing down. Luckily, I wasn't in its path, but it hit the ground, broke the carbide off a few teeth and covered about eight feet before it came to a stop. If any new DIYers are using a corded saw, never assume the cord is out of the way. Check it before every cut.
@matthewbay1978
Жыл бұрын
My experience has been the cord binding on the back side of the board and causing the blade to bind as it gets torqued the wrong way. I'm so sorry you had to deal with electricity AND a dangerous spinning finger separator!
@eyesuckle
Жыл бұрын
@@matthewbay1978 Good one! And one I'm very familiar with.
@grat2010
2 жыл бұрын
Came for here for great information, stayed for the hot dog fingers. Very well done!
@TheFunnyCarpenter
2 жыл бұрын
Thanksyou kindly:)
@tempusfugit3635
Жыл бұрын
@@TheFunnyCarpenter was gonna say these are the extra touches that really make your channel stand out.well done
@gamer2101
2 жыл бұрын
You saved my fingers. No joke, I do some of these things. You saved me. Thank you
@TheFunnyCarpenter
2 жыл бұрын
🍻
@Radoseizov
7 ай бұрын
Everything explained so clean. Bravo!!!
@imranh5395
2 жыл бұрын
One of the many things I appreciate about your videos, Funny Carpenter, is that they don't go on and on. You make your point and that's it 😊
@TheFunnyCarpenter
2 жыл бұрын
😂😂I usually try to cut all the parts out where I ramble on endlessly about nothing😴
@eyesuckle
Жыл бұрын
@@TheFunnyCarpenter I don't think this is really an appropriate place to be talking about cutting all the parts out.😁
@scorpio6587
2 жыл бұрын
This man just sacrificed a thousand dollars worth of lumber and thirty dollars worth of meat, during a recession, to teach us safety. I appreciate you, man!
@TheFunnyCarpenter
2 жыл бұрын
Lol this is true!
@tomrogers9467
Жыл бұрын
I was wincing seeing that clear pine being destroyed!
@lambornpeter3922
Жыл бұрын
😂😂😂👍🏻👍🏻👍🏻 meat. HAHAHAHAHAHAHA!
@patmat.
2 жыл бұрын
👏👏 Oscar prize of the best Special Effects for a construction video
@dougm3016
Жыл бұрын
My heart just missed a beat when you illustrated why you shouldn't place your hand behind the saw. That and setting the depth are two lessons I don't intend to forget when I use my new saw for the first time. Thanks 🤲
@6472275455
2 жыл бұрын
You have a nice way of presenting, its efficient and direct and nononsense, Yet with a light touch!!!
@TheFunnyCarpenter
2 жыл бұрын
Thank you
@archglobe3602
Жыл бұрын
As a beginner this is exactly the safety type of video I was looking for. I watched a couple other videos prior but your video covered the topic more accurately and better explained than others. Thank you!
@fiberfarmstead
2 жыл бұрын
Thanks!! I think you did a good job. Loved the hotdog fingers😳😱
@TheFunnyCarpenter
2 жыл бұрын
Thanks Buddy
@willie_mccoy
2 жыл бұрын
Now I know never to have my hot dogs directly behind the saw blade. Great info! 😁
@russellgeisthardt9828
2 жыл бұрын
Love the hot dog fingers!
@TheFunnyCarpenter
2 жыл бұрын
That was pretty fun to make, reminded me of when I was a proper moron with the family camcorder!
@ifesolox
Жыл бұрын
I love your content... I just started Woodwork and your videos makes everything easy. Thank you so much... Much love from Nigeria.
@VermontLock
Жыл бұрын
This is GREAT. THANK YOU. Thanks for making this.
@stevenjerauld2352
2 жыл бұрын
Great straightforward advice, sir. Never heard such a good explanation for setting the depth of a circular saw. Thank you.
@vpelleri1
2 жыл бұрын
Great safety tips. Thank you!
@jaredevildog6343
2 жыл бұрын
Another great helpful video ! This time you helped save humanity...... one finger at a time . Thank you kind sir .
@TheFunnyCarpenter
2 жыл бұрын
Cheers 🍻 buddy
@samfredo8140
2 жыл бұрын
Great video. I’ve been using a circular saw for well over 50 years now and one thing I’ve always tried to do is to keep the large part of the saw base plate over the supposed part of the material.
@TheFunnyCarpenter
2 жыл бұрын
Great tip!
@tonyc7352
2 жыл бұрын
Yes, I agree and I don't know this method isn't waaaay more popular. So much more stable.
@timdyesr
Жыл бұрын
Yes! This is the worst mistake new users and old users do too much. And, placing your body/face on the blade side of the saw. You should AlWAYS be on the motor side to keep sawdust and cut off pieces away from your face or body parts.
@dwoodbury
2 жыл бұрын
Great video! LOVED the hotdog demonstration! Thank you for saving our fingers!
@howtodoitdude1662
2 жыл бұрын
I love your cordless circular saw! I’m used to using worm drive circular saws with the blade on the left just like yours. Much easier to see the cut.
@TheFunnyCarpenter
2 жыл бұрын
It's funny I've tried a couple worm drive saws, feels like a different universe of tool.
@howtodoitdude1662
2 жыл бұрын
@@TheFunnyCarpenter yes they are heavy!
@riba2233
2 жыл бұрын
What brand?
@Radioman7600
5 ай бұрын
An experienced circular saw Op. does not need to see the cut. Set the depth and use the guide in front. Perfect everytime.
@kudagoredema7230
Жыл бұрын
Much appreciated tips for us newbies 👏👏
@Greenegoat
2 жыл бұрын
Thank you for the video and hopefully saving people from injury
@bikrchikie
Жыл бұрын
Thanks man, from a once a year user, I will be very diligent with all the tips, thumbs-up
@GrahamTodd-ca
2 жыл бұрын
Holding the saw with two hands - at least until you're comfortable and familiar with the tool - slows you down & forces you to pay more attention to supporting the material properly so that scrap pieces fall away, you avoid blade binding, etc. 👍🏻
@qwincyq6412
2 жыл бұрын
Useful tips that every saw user should know before even starting any saw
@daveorourke8447
2 жыл бұрын
Your Getting Better, thanks for the tips.
@monifataylor.realestate
Жыл бұрын
Thanks for this! It was very helpful for a beginner like me.
@zoladkow
2 жыл бұрын
great practical FX! Those sausages can still be done over fire to remove (most) of dust and chips 🤤
@megdahlin1118
Жыл бұрын
Great tips-learned something new. Thanks!
@creativegenius598
9 ай бұрын
Thanks a mil great video.
@gambhana7468
Жыл бұрын
so much helpful information, i have found this to be one of the most helpful and well explained sites..thankyou
@laidlawmarkus
2 жыл бұрын
Great video as always! In my early days, I was ripping a piece of osb with a circular saw, made the cut and placed the saw on the work surface before the blade had come to a stop, somehow the blade guard wasn't fully up...the saw kicked back in my direction... luckily it only caught the shorts I was wearing...for more reasons than the slice, I needed a new pair of shorts. Never made that mistake again.
@skiptowne5724
2 жыл бұрын
Alway lay the saw on its side with blade away from you. If the guard hangs up, no worries. I learned that a long time ago.
@eyesuckle
Жыл бұрын
Ha ha! "For more reasons than the slice." Discreetly put, sir. I believe the Aussies refer to this as "a brown trousers moment."
@stephenhaggard2194
2 жыл бұрын
Love the sacrificial hotdog fingers!!
@johncoppock3823
2 жыл бұрын
Great video and explanations. Many thanks.
@danielhammer7148
2 жыл бұрын
Hot dog fingers was magic. Well done
@allanridesbikes5856
2 жыл бұрын
That...explains so much. Thank you!
@nickx8411
2 жыл бұрын
verrryyyyyy helpful, thank you! subscribed!🙌
@georgebutler3rd
2 жыл бұрын
Wonderful video! Thank you!
@leylah111
Жыл бұрын
Great tutorial!!!
@oneminuteguitarlessons6060
2 жыл бұрын
Very helpful. Thanks
@TheFunnyCarpenter
2 жыл бұрын
You're welcome! Thanks for watching
@thepewplace1370
2 жыл бұрын
Great quality material here, thanks for the video! More folks ought to see this
@cathycraig1301
Жыл бұрын
Holy cow!!! That was a brilliant example, tho. 😮
@taylorsand
2 жыл бұрын
Great tips! This is a helpful video
@TheFunnyCarpenter
2 жыл бұрын
Thanks Taylor
@tonyc7352
Жыл бұрын
You're getting better.
@alexrains1893
2 жыл бұрын
It bears mentioning that kickback is severely reduced when using a tracksaw. It is not entirely nullified but almost null. Obviously the tracksaw isn't the first choice for every cut you've discussed but certainly for any panel product where kickback is of greatest danger. Personally between the drop saw and the track saw, I have no use for the circ but everyone has their own work methods.
@TheFunnyCarpenter
2 жыл бұрын
Track saws are great!
@evildead1791
2 жыл бұрын
Great tips
@RPmusic06
2 жыл бұрын
Great video bud, learned alot as always!!! Have a great weekend!🍻
@TheFunnyCarpenter
2 жыл бұрын
Thanks Rushill🍻enjoy your Sunday!
@car-journeys
Жыл бұрын
cool video, thank you! what saw are you using in the video? can you recommend one (cordless), please?
@johnmccormick8159
3 ай бұрын
I'm glad I saw this for #1.
@marcusmazza2255
2 жыл бұрын
Thank you sir!
@markmall7142
2 жыл бұрын
Nice vid ,Its nice that its kept clear and to the point.Did that guy get his fingers sorted? 😃
@TheFunnyCarpenter
2 жыл бұрын
😂Unbelievably the fingers grew back!
@conradcoolerfiend
2 жыл бұрын
i didnt know about the #1 tip, thank you so much, funny carpenter saving fingers out here
@danielpark3073
Жыл бұрын
omgoodness the "cutting your hand" scene was intense!!!
@projectqueen610
2 жыл бұрын
I like to make a 2x4 frame and put thick foam board on top. I use shelf grip from dollar stor under sheets. I find a way to clamp if I can. It slows down the process a little but. I respect the dangers of the equipment and I like my fingers. : )
@xmomartha
Жыл бұрын
Would any of these tips change if someone used a compact circular saw?
@regularguy9264
2 жыл бұрын
How about good side down for the cleanest cut? Got this sudden craving for hot dogs now…. Good tips!
@TheFunnyCarpenter
2 жыл бұрын
Excellent tip
@soulkalastudio
9 ай бұрын
My heart jumped out of my chest when the blade sliced through the Viennas lol
@rainbows1girl
2 жыл бұрын
Thanks!
@durango8882
2 жыл бұрын
Thank you excellent instructions.👍🏻new subscriber
@TheFunnyCarpenter
2 жыл бұрын
Thanks Mate, I appreciate the sub:)
@erichenao6537
2 жыл бұрын
Nice tips. The hot dogs were a nice touch. Should have also used ketchup.
@TheFunnyCarpenter
2 жыл бұрын
🤣You know I was thinking about it!
@nguyenduylong5255
7 ай бұрын
Thank you
@frailansendejo5578
Жыл бұрын
I have a 3/4inch plywood screwed onto a purlin. Can I make the cut, with the proper saw depth WITHOUT unscrewing the entire plywood?
@brianmiller5598
6 ай бұрын
I wasn't ready for the hot dog fingers!! 😳
@memoarellano5432
2 жыл бұрын
Ey Men this a good video..even for pros we all need to know those advice’s 🧔🏻♂️👍🏼
@VincenzaV1
2 жыл бұрын
Pure gold man! I just sub’d
@doodaddy1454
7 ай бұрын
you mention another video to check out to improve my skills, but I don't see any links to videos. thanks.
@Twobirdsbreakingfree
8 ай бұрын
Are hot dogs really the best way to simulate what happens to human fingers though? I'm pretty sure our fingers have bones and veins and other stuff in them other than ground up meat.
@TheFunnyCarpenter
8 ай бұрын
Nope, they’re pretty much just hot dogs.
@WestonP22
2 жыл бұрын
The hotdog fingers were some good laughs on my otherwise depressing day. Nicely done.
@johngriffin5446
Жыл бұрын
as someone who hasnt used a saw since high school long ago thank you! I remember my dad holding pieces so they didnt drop and I never through about a kick back to disaster
@LoveHandlesss
2 жыл бұрын
Good video!!
@TheFunnyCarpenter
2 жыл бұрын
Glad you enjoyed it
@crux314
3 ай бұрын
Thanks. - Two hands on the saw. Cutting your fingers probability drops to zero. Also provides you with better control in case of kickback. - Do not use a dull blade. - Ear protection. - Clamping the work piece with two clamps, minimum.
@CurrentElectrical
2 жыл бұрын
Did I win yet? I'm from Ontario after all. LOL How did the book deal go? When is the tentative release date?
@skiptowne5724
2 жыл бұрын
With a circular saw always set it down on it's side with the blade away from you. Never set down directly on the guard. The guard could have hung up and the saw could kick back causing injury. Especially on a larger corded saw.
@wulf67
Жыл бұрын
No. I just visually confirm that the blade guard is down before I set it down. Usually the brake stops it before that point anyway.
@jessical6633
18 күн бұрын
Those hot dogs got my heart beating good 😂
@karentyas9630
7 ай бұрын
I haven’t used my circular saw yet because, if I’m honest, it scares me to death. Watched a number of safety vids and yours is the first to say keep body parts away from the back. Now to pull the big girl pants up & start using it! Thank you
@sheenascott5405
Жыл бұрын
This man has managed to give me a weath of information and scared me shitless at the same time 😂😂 I don't know whether I should feel confident when my saw is delivered or to never open the box. Guess we'll see at the end of the month 🤷🏽
@mel3256
Жыл бұрын
I justcantdo sacrificial wood...im not killing trees for nothing. Is there a tool or option for under?
@JCAM-z9r
2 жыл бұрын
Trust me when I tell him you beginning woodworkers that once you’ve experienced kickback on/with ANY machine, you’ll NEVER want it to happen again! My first and thank God, ONLY experience was with my table saw. I was new to woodworking and not paying attention to the simple aspects of safety BEFOREHAND and nearly broke my chest and collarbone. The carpenter’s adage is, “Measure twice, cut once”. Do the same with your safety - Check your set up, then check AGAIN! You won’t regret it. Bright Blessings to all! 😊
@Eener1000
2 жыл бұрын
Yes, this! Get a small strip of wood wedged between the stop and the blade and that stuff shoots out like fired from a cannon. Happens very easy when at the end of the cut you put a bit more pressure towards one side when pushing the material past the saw and BAM!
@jaym9879
2 жыл бұрын
Good job with the hot dog fingers.
@kristinpothast
2 жыл бұрын
That was...um...graphic....but also very useful. I think I'm traumatized enough now that I won't forget your tips. I'm new to power tools and I always appreciate a thorough safety video!
@Metqa
4 ай бұрын
Videos on KZitem said to let the wood fall off the end, so it doesn't bind the blade, but when I got to the end of the cut, the weight of the overhanging wood 6:43 caused it to twist and tear off of the blade anyway. Why does everyone on KZitem show cutting over an edge but doesn't show it tearing at the end? it's always perfect cuts on the video. But in real life, It messed up the corner edge of the wood I was cutting and I don't have extra to Mess around with. Only a couple of people, including you, suggested "sacrificial wood" or putting a piece under it 7:15 . I didn't care about it falling but No one warned me about it tearing if it DID fall. I guess I should watch all the videos about what goes wrong instead of the Beginner's guides that just show everything going right without any mistakes.
@mattlechner8442
2 жыл бұрын
with the battery powered saws, you don't want to touch the saw blade or put your hand near it while the battery is connected. All that blade has to do is spin for a second or two, and you can say good-bye to those handy little fingers you had for the last 30-40 years or whatever. And you can set the blade to spinning with a simple thing like a sneeze, or a hornet dive bombs you, whatever. Or, the unit can malfunction. It is a relatively inexpensive mechanism, it can malfunction. Do not put your hand or fingers on or near the blade while it's connected to a power source. really.
@TheFunnyCarpenter
2 жыл бұрын
Excellent advice for sure. This particular saw had a two part mechanism to power it up…still not a good idea to touch the blade though!
@ItsaMeTW
2 жыл бұрын
was watching at 2x speed when hot dog reenactment happened and i did not realize it was hot dogs. rewind, slow it down, breath a sigh of relief, then giggle.
@TheFunnyCarpenter
2 жыл бұрын
😂🤣I knew that one would mess with the 2x ers!
@feelingrosie
2 жыл бұрын
Ahhh!!! The hot dog fingers!
@TheFunnyCarpenter
2 жыл бұрын
That was fun making that part!
@Csimon2429
Жыл бұрын
I didn't know pigs had fingers....suddenly i want a hot dog for some reason :P Just got a free Cordless 7-1/4" Ryobi Skill Saw with my Cordless Ryobi 322 Brad Nailer so thanks for the tips. Hopefully I'll manage to keep my digits. Go Canucks Go!
@edencantu1
Жыл бұрын
What model of makita is that one?
@dasmodul
Жыл бұрын
Beginner here. I don't get it, if you set the blade as a little passed the depth of the main piece, it might not cut the sawhorse in half but it'll scratch the hell out of it won't it?
@cathycraig1301
Жыл бұрын
Maybe you aren’t old enough to have seen the old wood sawhorses carpenters used. Trashed with cuts!
@tomrogers9467
Жыл бұрын
I feel safer with a chain saw in my hand than I do a skil saw. At least I have both hands on the tool, as many saws only have one handle. I’ll use my chop saw or table saw whenever possible. Skil saw is the last resort.
@wulf67
Жыл бұрын
More fingers have been lost on table saws than all other saws put together.
@hopenavajo1391
2 ай бұрын
One of the unsafe thing I was doing was putting the OSB atop a high table,that waa shorter than four feet with no support.
@sodd1000
5 ай бұрын
How about not holding a circular saw with a battery in with one hand a couple of inches from the blade? Or for that matter throwing it in the air and catching it....
@buttholasaurus99
2 жыл бұрын
So many people i worked with in the past hated and were afraid of my worm-drive Makita ( electric of course)
@JCAM-z9r
2 жыл бұрын
Oh, and ANOTHER thing I see on too many reckless videos is dangling clothing, sleeves, shirt tails, hoodie strings or hair (for some) not pulled back or up! The force of air being pulled through machines as you work can and HAS yanked people INTO the work flow and severed body parts, including faces! Tie and secure sleeves, hair or anything you’re wearing OUT OF THE WAY OF HARM, please. Woodworking is fun and inspiring but only if you stay mindful. Okay, ai off meh soapbox now (Caribbean dialect: Calypso to be exact) Bless up!
@SJtoobsox
Жыл бұрын
Missed the ketchup on the dogs lol
@csbarbourv
2 жыл бұрын
“Hotdog fingers” could be on a shirt.
@TheFunnyCarpenter
2 жыл бұрын
🤣
@batbawls
2 жыл бұрын
Face melting horror at the thought of hot dog fingers
@time2see192
Жыл бұрын
I cannot believe what I just witnessed....my husband cutting plywood off the edge of the porch, and plywood and saw was at shoulder level, with face 5-6 inches from the saw!!!! But Im not supposed to worry, or say abutting, cuz HE KNOWS WHAT HES DOING!!!
@wulf67
Жыл бұрын
Maybe he does. Stop undermining your husband. He's the man of your house. Does he try to tell you how to bake a cake?
@time2see192
Жыл бұрын
@@wulf67 Sometimes he does. And I don't mind, cuz we are a TEAM. Yet he doesn't have 40 years of cake baking experience, like I do. But, guess what, he also doesn't have YEARS and YEARS of woodworking experience with saws like I do either. And, also, for the record, I didn't say a word to him about it. I just came in the house and prayed for YHWH to keep him safe. So, see? He's got a great woman that treats him with respect, and honors his place as the man of the house. Im obviously NOTHING like the women you are used to. A wise man once said... it is foolish to form an opinion before hearing all of the facts. This will hinder learning and facilitate arrogance and ego. And you will most likely end up with a typical mouthy degrading woman that has no respect for YOU. 😎
@wulf67
Жыл бұрын
@@time2see192 You "didn't say anything to him about it" you just put him on blast to thousands of strangers. What a GREAT woman!
@andre1987eph
Жыл бұрын
@@wulf67 There is NO justification to have your face that close to a blade. BTW, you would NEVER make it with Los Angeles women if you think OP was being disrespectful. You haven't seen REAL disrespect til you come to California 😄
@wulf67
Жыл бұрын
@@andre1987eph I was born in California though, so...
@StrawbyteWorkshop
2 жыл бұрын
Oooo.... first comment. Great video - Thanks!
@roughroosterknifesharpenin5531
2 жыл бұрын
No way you already watched this whole vid.
@StrawbyteWorkshop
2 жыл бұрын
@@roughroosterknifesharpenin5531 You're right I hadn't. I have now. I was right.
Пікірлер: 186