I do love these 5-minute videos for experts. It's not "hidden." It's in the status bar at the very bottom. Lots of tools put dynamic keystrokes down there. Always worth looking at when you use a tool.
@UHStudio
7 ай бұрын
Very true :)
@FatPaps
Ай бұрын
The edge sliding at the start is absolutely useful!! Without this video I would never of known! I wander why such a useful mechanic was so hidden lol
@pZq_
Жыл бұрын
Simpler solution to Edge Slide Clamp is just use move tool: GG and hold Alt to extend the slide. Thx for the compilation of useful techniques 🧡
@UHStudio
Жыл бұрын
thanks for the tip! didn't know that.
@pZq_
Жыл бұрын
@@UHStudio the same works for verts. cheers!
@arch.blender1178
Жыл бұрын
Tool tips are really helpful, they can be extra helpful when a real use case is demonstrated as well
@UHStudio
Жыл бұрын
good point! what type of reaul use case are you suggesting?
@baptm727
11 ай бұрын
The first one is insane!
@UHStudio
10 ай бұрын
Thanks and glad you find it useful!
@NEERAJKUMAR-iy9kn
4 күн бұрын
Wow, thanks man 👍👍👍
@Betakpali
Жыл бұрын
Your videos are really great. A cool topic would be inserting buildings into a video (shots from a drone), motion tracking, camera tracking for architects in blender. Tips on how to maintain the scale of buildings in a given video, or how to insert an object into a video where the object is behind a fence.
@UHStudio
Жыл бұрын
Thanks for the suggestion, but camera tracking and video VFX are note my areas of expertise.
@protonprotonfix5749
9 ай бұрын
This is very useful. Appreciate your type of building the examples. Well done!
@UHStudio
9 ай бұрын
Cheers :)
@BGStNickBG
26 күн бұрын
One of the most valuable videos out there. Thank you!
@zRedPlays
Жыл бұрын
Damn I needed that outwards edge slide on my last project, I managed to get it done but knowing that before would've been much easier
@UHStudio
10 ай бұрын
Yes some of these are crazy that they feel so hidden!
@michelleh1464
3 ай бұрын
exactly what i was looking for with the extrude slide edge
@StevenWhite-w6p
22 күн бұрын
You can just hold the alt key to slide in the direction past the resting position.
@MaarChokoj
3 ай бұрын
Thank you for this useful tutorial. Definitely learned a lot from it. Appreciate you!!! 🤩🤩🤩
@UHStudio
2 ай бұрын
Cheers!
@joshhockey9
10 ай бұрын
It does actually tell you how to toggle clamp in the tool properties, you just have to be looking while actively using the tool. The moment you clicked on that pin it gives the exact same information as if you pressed GG or used the context menu Overall pretty useful video for beginners. I don't know how popular this kind of video is, but bite sized tool insights & workflow tips are never a bad thing.
@UHStudio
10 ай бұрын
Thanks for the feedback :)
@ravender730
4 ай бұрын
Can you make a video about angles and degrees? And how to give an edge a specific lenght with typing?
@UHStudio
4 ай бұрын
Sure! Great suggestions.
@mrgrizzle17
5 ай бұрын
Very simple and helpfull thank you!
@UHStudio
5 ай бұрын
Cheers :)
@cekuhnen
7 ай бұрын
HUGS to you ! the GG pick axis and then press C for clamp man !!! AMAZING !!!
@Arthur_Vilarinho
Жыл бұрын
I’m a early subscriber!! Love your tutorials!!
@UHStudio
Жыл бұрын
thanks so much!
@markuszeller_official
5 ай бұрын
0:50 Also, when you use gg to slide, then you see on top if (C)lamping is turned on or off. Just look in your video :)
@UHStudio
4 ай бұрын
Yes thank you :)
@anishk5572
2 ай бұрын
Hello, can you please tell how does your viewport look like that? All outlines and things look so clear and different
@UHStudio
Ай бұрын
I am using material preview, so baiscally eevee, have wireframe on, use a sun light and a more reflective ground surface so it creates this type gradient effect. As for the material for the geometry, it's just teh default one. Hope this helps. Thing may also be a bit different now in 4.2 with Eevee Next, which is a new version of Eevee.
@damkrat9665
2 ай бұрын
wow so cool
@yarsk2937
6 ай бұрын
if you want to slide edge like at first tip you can also just press alt
@yarsk2937
6 ай бұрын
also for more fast transformations by normal you can press twise z/x/y
@lexmaun69
5 ай бұрын
How do you show that outline when modeling? like that wireframe sir?
@UHStudio
4 ай бұрын
In the viewport header, top right, the two overlapping circles icon for Overlays, click the arrow to open the menu and near the middle there should be an option to enable Wirefeame
@jamesriley5057
3 ай бұрын
Thank you. I use blender 50 hours a week. Sub'd
@UHStudio
Ай бұрын
Nice! What do you? Have you joined the discord yet?
@bbrother92
8 ай бұрын
Do arch guys use blender in studios? Max have a lot of 3d models and plugis so its hard to switch
@UHStudio
7 ай бұрын
Some do. Less than max, but more and more are adopting Blender.
@TheRealDangerFrank
Жыл бұрын
for the the one you can just hold alt
@UHStudio
Жыл бұрын
do you mean GG and then alt as @pZq suggested?
@babkinalex92
3 ай бұрын
god bless you
@UHStudio
Ай бұрын
cheers :)
@binodkavali
Ай бұрын
It's not a bug, It's a features.
@Barcikowy
9 ай бұрын
4:17 its doesnt works. Z is cutting through.
@bbrother92
8 ай бұрын
C button does not work
@commieprohibition5429
24 күн бұрын
Dude, you can blink you know.
@neilmarshall5087
Жыл бұрын
No mention of inset then holding Ctrl down...... Extrude and scale together! Keep releasing and pressing the Ctrl while the inset is still active and you are moving the cursor up / down ........ to learn the tool.
@UHStudio
10 ай бұрын
Thanks for the tips. Any more?
@neilmarshall5087
10 ай бұрын
@@UHStudio Sure - Taking 5 months to respond to comment seems insulting to us viewers. Try cutting that down a bit. Have a nice day.
Пікірлер: 56