6:40 I like when you tried to plug it in into the capacitor.
@DavidWatts
7 жыл бұрын
Ha ha, old age and viewing the bench through the camera's LCD will make you do crazy things.
@mduke2k
6 жыл бұрын
Great screens for DIY projects. Inspired by Ben Heck I'm interested in making a PI portable game console based on using original hardware. So I believe it will be a nightmare to have an HDMI signal sent through the zif cable. The build will be unavoidable tight on space, so I'm aimless on what parts to even look at! I if the screen is not a kit, I will we willing to gut the display assembly if I get everything working. Spolier: I want to make a battery powered handheld Sega Saturn. I can ditch the CD Drive because the Rhea and Phoebe mod works like the Dreamcast GDEmu.
@englishrupe01
5 жыл бұрын
Great review, thanks David. I have just ordered two of these from Ebay (without the touch screen, which i do not want) at $20 each! Amazing bargain. And thanks so much for the config file!
@Dun-N-Dusted
4 жыл бұрын
idk if you still remember, but is there any way you can share the link to these 20$ ones you got? im making a portable but dont want to waist money on touch im not going to use
@w.rustylane5650
7 жыл бұрын
Oh, by the way, mate, the interface cable goes under the little black bar, not over the top of it. I found that in another video. You might want to check that out.
@aaronb1138
4 жыл бұрын
There should really be clarification if this is a capacitive or resistive touch display. Aliexpress description says resistive, overlay looks resistive (matte, blocks some light), but the reviewer keeps saying capacitive. Capacitive often supports multi-point touch, resistive usually does not. Resistive works fine with insulators for stylus or gloves, so is better suited to industrial environments, though resistive elements are usually plastic, where capacitive can be glass. Pretty sure this is resistive and this can make a big difference depending on the use case and environment.
@MkmeOrg
8 жыл бұрын
Looks great David. Nice screen for sure.
@RaadYacu
6 жыл бұрын
David. this is a nice alternative to LCD. lease put a video when you get the capacitive touch working also.
@59394eric
5 жыл бұрын
Thank you very much for solving my problem!
@KuntalGhosh
6 жыл бұрын
2:56 that is lvds connector normally used lcd pannels of laptops and tvs ....
@AdammP
8 жыл бұрын
to get audio out, you could just buy a hdmi to hdmi + audio extractor, or use the raspberry audio out..
@shengsun5916
7 жыл бұрын
I am having trouble finding the calibration program for this little toy any suggestions would be greatly appreciated.
@mr2cqql
4 жыл бұрын
Is it possible to connect with RGB connection , because I am trying to replace a Car factory gps display with this and the car connection pinout uses RGB, NV SYNC?
@salvozing9009
Жыл бұрын
ciao,come cambiare la risoluzione? ho fatto la stessa cosa,ma lo schermo si vede a meta'.... uso batocera arcade
@andysuiza1
6 жыл бұрын
Great ! I Will Check It tomorrow morning, thanks for all!!!! I back to you asap
@jarisipilainen3875
7 жыл бұрын
you can change that config.txt in PC if settings not work
@AlternativeDIYEnergy
8 жыл бұрын
Awesome. Makes me think me get get one too my friend.
@DavidWatts
8 жыл бұрын
+Alternative DIY Energy You should, if you don't want the touchscreen (Which I don't really need) they can be had for £22 delivered.
@AlternativeDIYEnergy
8 жыл бұрын
Cheers for that my friend.
@MSSTUDIO
4 жыл бұрын
Hi I just purchased the lcd with board like yours and I connect hdmi and it look like centre of the screen is not in the middle but on right corner and I can't find any help please do you know solution for this problem?? Please help.
@shengsun5916
7 жыл бұрын
You're missing also an remote controller for the screen.
@Aleksander736
6 жыл бұрын
the problem with the touch screen, tap in the middle to fishing and to the right, all is well, and when at the top press the arrow at the bottom when at the bottom click the arrow at the top how to fix a config or driver???
@christiand4295
5 жыл бұрын
I'm trying to make a 4 screen picture frame. Is that possible. All 4 screens to one raspberry pi with a SD card of the pictures?
@Aleksander736
6 жыл бұрын
the problem with the touch screen, tap in the middle to and to the right, all is well, and when at the top press the arrow at the bottom when at the bottom click the arrow at the top how to fix a config ???
@alexgrind
7 жыл бұрын
For me was working good on raspbian but for using retropie and Kody was not working at all what can I do
@lordsjaak
2 жыл бұрын
i have question.... can you use due HMDI cable to connect on your pc or do you need more Raspberry PI for the screen more working i have troubling with the connections? and it is mine first time i using this screen because i want to use the screen for making a old school television for mine scale modeling.
@Brikzilla
3 жыл бұрын
Could I use a usb to 12v adapter to power this?
@DavidWatts
3 жыл бұрын
Sure, I don't see why not
@Furkanf22
4 жыл бұрын
Is there a way to plug or solder a speaker on the board to use when connected to HDMI
@thejnius9374
7 жыл бұрын
i maybe have a bit of a stupid question, is there a way where you can connect the the screen to the raspberry pi itself or a powerbank or something so you wouldn't use all those power sockets?
@MrCrank357
6 жыл бұрын
hi, does this logic controller board charge up a 9-12v battery connected to the 2nd power terminal if you plug in the primary power adapter. Will it pass power to the battery if both are connected and just to give battery charge.
@dominik8040
7 жыл бұрын
Can You check the touch PCB and connect it to PC with windows 8 or 10? Is it recognized as digitizer (or mouse) and can You get access to pen settings in control panel. You can check it without screen, just PCB. Thanks!
@kjelltp
7 жыл бұрын
Do you think this screen would be bright enough to use in a car project?
@jarringmate9016
6 жыл бұрын
What are the dimensions for the driver board coz I am thinking about buying this
@johndowney47
7 жыл бұрын
Hey David. Thanks for this video. I was able to full screen for the raspi 3 with the google AIY top hat on it. Have you tried calibrating the touch screen?
@DavidWatts
7 жыл бұрын
Hi, I gave it a quick go but I couldn't figure out how to invert the axis. Mine appears to be back to front, left goes right as it were. Other than that it appear to have full coverage.
@johndowney47
7 жыл бұрын
I went to the 52pi web site and tried to calibrate the screen. You have to load and use their calibration tool from the command line, then cut and paste the results into a .conf file. When I tried that the GUI would not come up. I am thinking of swapping the pins around. I am running the Google AIY image from Magpi magazine. wiki.52pi.com/index.php/7-Inch-1024x600_Display_Kit_(with_Touch_Screen)_SKU:Z-0017#Documents
@mukhlis_wijayanto
6 жыл бұрын
apakah bisa untuk panel tablet
@lookingforjapanesegf
5 жыл бұрын
Did you ever get the Touch portion working?
@stockmarketindicators7693
4 жыл бұрын
Stephen Williams I'd love to know
@andysuiza1
6 жыл бұрын
Could we use it on a vertical position ?
@enzodanielcab
7 жыл бұрын
David, will this work with PC through the VGA from the display driver?
@user-rf2dr4gd9s
5 жыл бұрын
may be CD is an instruction
@sajith565
8 жыл бұрын
how to set the drivers windows iot on raspberry pi2 . display is work but touch not detec
@DavidWatts
8 жыл бұрын
Try this page - blog.tpcware.com/2015/06/enable-display-touch-on-windows-10-iot-raspberry-pi-part-1/
@renzomy4723
6 жыл бұрын
Nice video , How much voltage did you use for the lcd?
@DavidWatts
6 жыл бұрын
5v
@saritabhatt3709
6 жыл бұрын
Can u show how to mke a minty pi
@loganhardesty1711
3 жыл бұрын
Is there a case for this?
@rafasharifqi9750
3 жыл бұрын
sir i want to ask, please reply.. from that waveshare lcd, can it run 60fps video on that little screen? thx
@DavidWatts
3 жыл бұрын
It has a 60hz refresh rate, so yes I think so.
@BUrbbable
6 жыл бұрын
I am not getting input on my raspberry pi :/
@nunoprotasio
6 жыл бұрын
This may sound stupid but where do i put this file in the rpi
@Fahreun
3 жыл бұрын
is it working with DCS ?
@kaskenova
7 жыл бұрын
Hi David, maybe a stupid question but could I also just use it with a regular PC? So just connect it via HDMI so I can use it for Simracing as a dashboard...
@DavidWatts
7 жыл бұрын
Absolutely you can.
@kaskenova
7 жыл бұрын
Question is how can you check if your video card can handle this resolution? I've read that sometimes the resolution is too low for your card to recognize it. I have an Nvidea GTX 770 but can't find if it will handle this resolution or not...
@kaskenova
7 жыл бұрын
Just got mine, works perfectly! I was lucky enough to get the cable to connect the buttons :). Question is how do you make the touch work?
@DavidWatts
7 жыл бұрын
It doesn't work that well to be honest, even on the raspberry pi.
@mukhlis_wijayanto
6 жыл бұрын
apakah bisa pakai lcd tablet
@sinaks7752
6 жыл бұрын
Do you have a case or enclosure for the screen? I have one of these and been trying to find a decent case that works for it.
@DavidWatts
6 жыл бұрын
Sadly not, I 3d printed a really crap one and it really just holds the thing up. An enclosure would be great though so if you find one send me a link.
@Ohem1
7 жыл бұрын
Just a better interface and virtual keyboard you're good to go.
@bartconinckx
5 жыл бұрын
demonstate?
@pixelatedicon6579
6 жыл бұрын
Thanks for the review I was just going to buy the exact same screen. How did it look once you'd got the controls working?
@DavidWatts
6 жыл бұрын
The screen actually looks great, I am struggling to find a nice case for it. The one I 3d printed is pretty rubbish and my print area is not really great enough to make use of the ones on thingiverse.
@pixelatedicon6579
6 жыл бұрын
David Watts I was thinking of making a case from acrylic sheets. I've seen a vid on someone making a joystick case using that and it looked decent.
@lewiskae5977
5 жыл бұрын
can it install raspbian os
@peterhimjoy7475
4 жыл бұрын
Very nice ! I can provide LCD screen!
@andysuiza1
6 жыл бұрын
Hello, how can I display in vertical format ? Thanks
@DavidWatts
6 жыл бұрын
Sure, this should help - www.raspberrypi.org/forums/viewtopic.php?t=120793
@andysuiza1
6 жыл бұрын
Hi thanks David :) I have already tryed this, but when I change the parameters to display_rotate=1 my Raspberry starting the display in vertical (white lines) and then my screen stay black :( turned on but black screen ! it could be come because I'm using the Raspberry B and maybe it have not the puissance needed :( Have you any idea ? Thanks very much somes datas coming by pi during the videolooper: total used free shared buffers cached Mem: 374M 155M 219M 0B 13M 79M -/+ buffers/cache: 62M 312M Swap: 99M 0B 99M ^C pi@raspberrypi ~ $
@DavidWatts
6 жыл бұрын
try updating the pi with sudo apt-get update then sudo apt-get upgrade (this will take a while) then reboot. I think there was a padding issue at some point.
@andysuiza1
6 жыл бұрын
wouuuu is works!!!! I need just display in a full screen now :) have you a magic command ligne ?
@DavidWatts
6 жыл бұрын
You will probably need to play around with /boot/config.txt to get it to display fullscren. Check out the solutions here - www.raspberrypi.org/forums/viewtopic.php?t=14914
@mukhlis_wijayanto
6 жыл бұрын
apakah bisa untuk lcd tablet
@romariop.9859
8 жыл бұрын
хороший дисплей, но я немного другой купил
@danielartun4115
7 жыл бұрын
POSITIVO BGH
@jttech6834
7 жыл бұрын
Will it work with windows 7 and 10?
@DavidWatts
7 жыл бұрын
Works fine on Windows 10 for me, I am afraid I gave up windows 7 a long time ago now.
@jttech6834
7 жыл бұрын
I don't use Windows 10 because of various reasons. But I think if it works with windows 10 it should work with windows 7.
@phinahnwosu2574
7 жыл бұрын
were did u buy it
@britneyspears9787
7 жыл бұрын
The screen with acrylic stand.It's very easy to assemble.www.amazon.co.uk/GeeekPi-Raspberry-1024x600-Display-Tranparent/dp/B06XZ5GR6Y/ref=sr_1_1?ie=UTF8&qid=1492655357&sr=8-1-spons&keywords=raspberry+pi+7+inch&psc=1
@JohnSmith-rn3vl
7 жыл бұрын
Did you ever manage to get the touchscreen to work?
@DavidWatts
7 жыл бұрын
It does work with the latest raspbian image but the axis need calibration.
@user-to1ty9ew4n
7 жыл бұрын
John Smith please tell me which drivers from the disk use for touchscreen raspberry pi3, thank you
@JohnSmith-rn3vl
7 жыл бұрын
Андрей ААВ I sent mine back because I could not get touch to work.
@marcinbrzozowski2091
7 жыл бұрын
Андрей ААВ there are drivers for Windows only
@gamingmania759
7 жыл бұрын
how much power is requiredd to power the display can i plug it with a power bank
@DavidWatts
7 жыл бұрын
I would budget for ~500ma so it will run from a power bank.
@gamingmania759
7 жыл бұрын
David Watts what is the required voltage
@nonenone1087
6 жыл бұрын
Gaming Mania 9-12 volts I think
@nomeirx
6 жыл бұрын
fk product without a case.
@OpsTaGravando
8 жыл бұрын
still working fine?
@DavidWatts
8 жыл бұрын
Yeah, working great. I don't have it on all the time though.
@freakyflow
8 жыл бұрын
I have the Pi 3 and the Same 7" screen ..2 days trying to get the Touch to work right I also have to spread out the screen about a inch I went to the EEti supplyer (egalax) but the downloads are 3 years old and 5 years old ..nothing for Pi 3
@freakyflow
8 жыл бұрын
# uncomment to force a console size. By default it will be display's size minus # overscan. #framebuffer_width=1280 #framebuffer_height=720 Is this with Sudo apt-get ..? Sorry i'm still new with Linux and programming
@freakyflow
8 жыл бұрын
I found the place for overwrite and turn it off and enabled SPH Screen fits good Now the Touch is 100% off before it was jumpy lol ..getting closer
@marcinbrzozowski2091
7 жыл бұрын
who knows how to invert Y axle? :/ trying a lot of stuff from google and no resoults :(
@DavidWatts
7 жыл бұрын
Exactly what I couldn't figure out so I didn't cover the touchscreen in another video.
@bjornroesbeke
6 жыл бұрын
On a desktop interface based on X11, use xinput_calibrator. (GNU/Linux, not Winblows)
Пікірлер: 109