ever consider using high end kitchen hardware for those doors. The hardware tends to be hidden and the action is usually smooth and you can even get soft close hinges.
@SalvagetoSavage
6 ай бұрын
A lot of the times we end up going with boat hardware, since it's made to withstand the weather (and especially the salt in the air from being so close to the beach down here). Kitchen hardware is a good idea though. I wonder how it would hold up to the elements
@bradkraus5217
6 ай бұрын
Great job and great to see it complete!!
@SalvagetoSavage
6 ай бұрын
Thank you! Cheers!
@NWIGuy
6 ай бұрын
Very sharp! Nicely done!
@SalvagetoSavage
6 ай бұрын
Thanks a lot!
@pascalchavanon1930
6 ай бұрын
You are a true hardworking artist. Beautiful job 👍🤓🇫🇷
@SalvagetoSavage
6 ай бұрын
Thank you so much 😀
@robertgoulden3637
6 ай бұрын
Mikey you and your crew do amazing work!
@SalvagetoSavage
6 ай бұрын
Thanks!
@forgivenx1947
6 ай бұрын
Can’t wait to see it on the road 🔥
@oldblueshhrchannel1847
6 ай бұрын
She’s a beauty! Thanks Mike and everyone who worked on this truck! See you next week!!
@SalvagetoSavage
6 ай бұрын
Thank you so much! We'll have some continental content coming for you next Wednesday!
@KirkVSSpock
6 ай бұрын
Just wow !! What a job
@davemurphy63C10
6 ай бұрын
Really nice work!
@SalvagetoSavage
6 ай бұрын
Glad you think so!
@modernworldartworks
6 ай бұрын
Nice work
@SalvagetoSavage
6 ай бұрын
Thank you! Cheers!
@jeffborders5448
6 ай бұрын
I love watching your videos. It’s relaxing.
@robsdeviceunknown
6 ай бұрын
DANG what a beauty. The things that impress me more than anything is the small details. The ones no one sees but YOU know they are there.
@SalvagetoSavage
6 ай бұрын
Those are always the parts that we love the most!
@lowtidecustoms1166
6 ай бұрын
That far exceeded all expectations! Such a sick build!!!
@SalvagetoSavage
6 ай бұрын
All the pieces really came together nicely!
@IYIENACE
6 ай бұрын
Mikey you're an artist man
@SalvagetoSavage
6 ай бұрын
Thank you!
@brentbeiler7051
6 ай бұрын
I’ve got a 79 F-150 with a fiberglass front tilt clip, I’m going the same route with the tilt part of your bed, BUT you gave me some way better ideas!! Thanks. Killer job.
@SalvagetoSavage
6 ай бұрын
Love to hear that! Hope the project goes smoothly! Tag us in the finished build. We'd love to see it!
@charliemclaughlin1042
6 ай бұрын
You guys always do awesome work 👍
@SalvagetoSavage
6 ай бұрын
Thank you! We really appreciate it!
@billybike57
6 ай бұрын
This turned out pretty trick!
@SalvagetoSavage
6 ай бұрын
We're really stoked with how the whole bed turned out!
@DavidKornrumpfII
6 ай бұрын
With that gap that you mentioned, you could run an led strip their to add some ambient lighting to the bed
@SalvagetoSavage
6 ай бұрын
We got some led's running under there already to light up the frame & airlift components when we're at shows!
@tbranscom1
6 ай бұрын
Beautiful work man, thats one clean truck from front to back!
@caseyspirit9385
6 ай бұрын
Turned out nice! Great work and attention to details…
@SalvagetoSavage
6 ай бұрын
Thank you so much 😀
@KingBee77
6 ай бұрын
🎶 Smoooth actuatooor, smooth actuator.
@SalvagetoSavage
6 ай бұрын
If we had the budget like that for music licensing, that would definitely be the song choice!
@KingBee77
6 ай бұрын
@@SalvagetoSavage When you mentioned the actuator, Sade's song Smooth Operator came to mind lol
@MikeAnderson-uj3oo
6 ай бұрын
You certainly have an eye for detail Mikey. It's all in the name.
@thisoldhooptie
6 ай бұрын
Work of art, love it! 👍
@michaelsimrell8575
6 ай бұрын
Mikey Rolls....Salvage to Savage turns out some of the BEST work i have seen. Keep it up bro! Excellence does have a name!
@SalvagetoSavage
6 ай бұрын
Thank you so much!
@oldman7452
6 ай бұрын
Absolutely awesome build. It's the "Details" that make any build unique. The bed is a FN piece of art. Whole truck is a "head turner". I wish I still had my 75 C-10 and the $$$ to have it done by a talented shop like yours.
@Siyadlams
6 ай бұрын
That's not a truck. It's a piece of fine art right there. Good job S2S👍👍
@briandoerner2620
6 ай бұрын
Holy crap..what a ton of work..Great job! The cost just keeps going up. You should add some led lights under the lid!
@SalvagetoSavage
6 ай бұрын
We got some strip lights back there to light up underneath the hatch!
@Adee4750
Ай бұрын
1 badass truck i hope to build my 86 and put it on air being a disabled vet it's going to be a long road
@SalvagetoSavage
Ай бұрын
Just gotta tackle it one small step at a time!
@NeverLetOff
6 ай бұрын
Wow... that lift door is amazing! And the paint is incredible! I love that you did the panel behind the tailgate white to match the two tone. Killer job, killer work, thanks for sharing!
@SalvagetoSavage
6 ай бұрын
Thanks for watching!
@mwine9454
6 ай бұрын
Really nice work. Detailing that after a drive in the rain is going to be a nightmare. Beautiful build otherwise!
@bravomike09
6 ай бұрын
Damn nice work! Dime Bag is an engineering master piece!
@djbillbass2095
6 ай бұрын
Another dope video
@SalvagetoSavage
6 ай бұрын
Appreciate it!!
@MrFord1933
6 ай бұрын
Great job guys 💪 watched all the c10 build , inspires me to get mine done 👌keep at it
@SalvagetoSavage
6 ай бұрын
It means a ton to us hearing that! Hope your project doesn't give you too many headaches!
@chrispy104k
6 ай бұрын
Soooooooo nice. Great work team.
@SalvagetoSavage
6 ай бұрын
Thank you so much!
@Tkschelle
6 ай бұрын
Next time you get into a jam like that on your bead roller, try flipping the dies. That tip has kept me from scrapping a few panels.
@SalvagetoSavage
6 ай бұрын
Thanks for the heads up!
@samperras
6 ай бұрын
Yes, a lot of work, but what a great show All the best to you all
@SalvagetoSavage
6 ай бұрын
Thanks, you too!
@russelllong2974
6 ай бұрын
Looks phenomenal! Great work guys!!! Enjoyed the longer video this morning.
@SalvagetoSavage
6 ай бұрын
Glad you enjoyed it!
@1973GLH
6 ай бұрын
Very clean. Professional to the tiniest detail
@LuisRamirez-ts3rp
6 ай бұрын
My savages at Werk as usual
@SalvagetoSavage
6 ай бұрын
Hope you're doing well Luis! Thanks for the support!
@BT_aka_PET_ROOSTER
6 ай бұрын
Super trick, congrats on that killer build!
@SalvagetoSavage
6 ай бұрын
Thank you! We really appreciate the support!
@BT_aka_PET_ROOSTER
6 ай бұрын
@@SalvagetoSavagewe appreciate the content for consumption and fuel for our curiosity!
@carsandconcerts
6 ай бұрын
Awesome!
@lesterthomas1296
6 ай бұрын
Once again, as always, fantastic build, attention to detail and over all quality above and beyond.👌🏽👌🏽👌🏽
@SalvagetoSavage
6 ай бұрын
Wow, thank you! We really appreciate the support!
@lesterthomas1296
6 ай бұрын
@@SalvagetoSavage I came across your channel when Cha-Ching was featured in a Haltec video. You guys do not disappoint. ✌🏽&❤️ all the way from South Africa🇿🇦
@jimcondray4632
6 ай бұрын
That is one beautiful truck!
@SalvagetoSavage
6 ай бұрын
We're stoked with how it turned out!
@DankDankPancake
6 ай бұрын
That’s a tight bung hole. I can’t believe you fit your hardware in it
@SalvagetoSavage
6 ай бұрын
That combination of words should be illegal lol
@davidhinojosa9327
6 ай бұрын
Nice work S2S!
@SalvagetoSavage
6 ай бұрын
Thanks!
@tylerbarrett6652
6 ай бұрын
THAT was an awesome build!! I'm just glad we get to see at the one last time when you hand it over to Dave. I can't imagine what the price tag on this custom job is... I don't think I even want to know. I bet he's going to be very happy with it. Now... on to that Lincoln with the suicide doors... right?
@SalvagetoSavage
6 ай бұрын
Yes! We've been putting out some episodes on it already. But next week we're doing some more fabrication on the trunk area, then moving onto setting up our custom interior!
@Manel66
6 ай бұрын
Artwork, and not simply... 👏👏👏👏
@weiyunchi
6 ай бұрын
This truck is a work of art.
@SalvagetoSavage
6 ай бұрын
thank you!
@ChannelDCF
6 ай бұрын
The truck is looking great especially the door!!! Just wondering where all your crew is? Great video keep it going.....
@SalvagetoSavage
6 ай бұрын
Working on other projects around the shop
@Ray_Sellner
6 ай бұрын
Glad to see it done, I already have the shirt!
@SalvagetoSavage
6 ай бұрын
That's awesome! Where are you at? Maybe we'll be hitting a show your way sometime soon!
@Ray_Sellner
6 ай бұрын
@@SalvagetoSavage Just North of San Antonio.
@dalebickham2666
6 ай бұрын
Skills to pay the bills!
@senorspiegel
6 ай бұрын
Awesome
@Lazerchicken69
6 ай бұрын
KIck ass! love this build!
@SalvagetoSavage
6 ай бұрын
Thank you so much!
@WhoisJasonChabot
6 ай бұрын
amazing wow
@SalvagetoSavage
6 ай бұрын
Thank you! Cheers!
@suprmn1978
6 ай бұрын
Gotta put some lights in there too…
@SalvagetoSavage
6 ай бұрын
We already got some lights down there!
@LSandL31
6 ай бұрын
Pros to the maximum!
@SalvagetoSavage
6 ай бұрын
Thank you!
@billbayer5526
6 ай бұрын
Great build, guys!! Does Chuck C have a webstore?
@SalvagetoSavage
6 ай бұрын
Not sure about a website, but you can look him up on instagram (@chucksee)
@noavg_joe
5 ай бұрын
Awesome build guys! 🤙 Any chance you could let me know what colour/code that blue paint is?
@sickjohnson
6 ай бұрын
5 weeks? 🤯
@srjonespires
6 ай бұрын
top de mais!!!
@martin.k3211
6 ай бұрын
If is acrylic that be dope.. see true
@SalvagetoSavage
6 ай бұрын
Acrylic is cool but it would get scratched and scuffed up from the bottom really quickly!
@b_for_brett
6 ай бұрын
Only 99/100? C’mon Mikey lift your game 😂
@carlitosrivera6457
6 ай бұрын
Primo estas hecho un mostró con esos vehículos. Como esta Joy Tu Papa. Dales mis saludos.
@Tommy-B.
6 ай бұрын
Roll the bead roll B-roll. 😂
@SalvagetoSavage
6 ай бұрын
That is going to be the new phrase every time we gotta roll some metal now! lol
@steves.275
6 ай бұрын
Sweeeet!
@grayzbildz
6 ай бұрын
How do you stop the rust forming between the the perforated steel and the frame?
@SalvagetoSavage
6 ай бұрын
Everything ends up painted, or at least clear coated
@pedrofernando176
6 ай бұрын
👍🤙
@willemp6432
6 ай бұрын
Another child leaving the nest. 🥲
@SalvagetoSavage
6 ай бұрын
Sad to see em go, but it's nice knowing the owner is going to love it too!
@codingchewie
6 ай бұрын
Where you source the custom car emblems?
@SalvagetoSavage
6 ай бұрын
Check out CustomCarEmblems on IG! He's who made all of them for us!
@masterg8189
5 ай бұрын
💪👊👏
@ЮрийДемьянов-й4щ
6 ай бұрын
огонь!
@bouhmidimohamed3555
6 ай бұрын
👍👍👍
@p_5593
6 ай бұрын
Where can I get a set of those actuators?
@SalvagetoSavage
6 ай бұрын
Look up Chucksee on instagram!
@henkvandervis7785
6 ай бұрын
can you stand on that door?
@SalvagetoSavage
6 ай бұрын
Yeah, it would be fine to stand on
@Wayne_Nero
6 ай бұрын
Does Chuck C have a website?
@SalvagetoSavage
6 ай бұрын
You can find him on instagram! (@chucksee)
@travisschulz6342
6 ай бұрын
That’s why I bought the 36” throat never know when you need that extra room. Also really kills me when you guys use angle iron on higher end builds, it takes 2 min to shear, round the corners and bend a proper piece of steel your not garage building use your tools don’t be lazy lol
Пікірлер: 134